This is an old revision of the document!
; Copyright © uib gmbh (www.uib.de) ; This sourcecode is owned by uib ; and published under the Terms of the General Public License. ; credits: http://www.opsi.org/credits/
[Actions] requiredWinstVersion >= “4.10.8.6”
DefVar $MsiId32$ DefVar $UninstallProgram32$ DefVar $MsiId64$ DefVar $UninstallProgram64$ DefVar $LogDir$ DefVar $ProductId$ DefVar $MinimumSpace$ DefVar $InstallDir32$ DefVar $InstallDir64$ DefVar $ExitCode$ DefVar $LicenseRequired$ DefVar $LicenseKey$ DefVar $LicensePool$ DefVar $INST_SystemType$ DefVar $INST_architecture$
Set $INST_SystemType$ = GetSystemType set $INST_architecture$ = GetProductProperty(“install_architecture”,“system specific”)
Set $LogDir$ = “%SystemDrive%\tmp”
; —————————————————————- ; - Please edit the following values - ; —————————————————————- ;$ProductId$ should be the name of the product in opsi ; therefore please: only lower letters, no umlauts, ; no white space use '-' as a seperator Set $ProductId$ = “opsi-template” Set $MinimumSpace$ = “1 MB” ; the path were we find the product after the installation Set $InstallDir32$ = “%ProgramFiles32Dir%\<path to the product>” Set $InstallDir64$ = “%ProgramFiles64Dir%\<path to the product>” Set $LicenseRequired$ = “false” Set $LicensePool$ = “p_” + $ProductId$ ; —————————————————————-
if not(HasMinimumSpace (“%SystemDrive%”, $MinimumSpace$))
LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
isFatalError
; Stop process and set installation status to failed
else
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
if FileExists(“%ScriptPath%\delsub.ins”)
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub.ins"
endif
if $LicenseRequired$ = “true”
comment "Licensing required, reserve license and get license key"
Sub_get_licensekey
endif
comment “installing”
if 1) or ($INST_architecture$ = “both”) or ($INST_architecture$ = “32 only”)
Message "Installing " + $ProductId$ + " 32 Bit..."
comment "Start setup program"
Winbatch_install_32
Sub_check_exitcode
comment "Copy files"
Files_install_32 /32Bit
comment "Patch Registry"
Registry_install /32Bit
comment "Create shortcuts"
LinkFolder_install
endif
if ($INST_SystemType$ = “64 Bit System”) and 2)
Message "Installing " + $ProductId$ + " 64 Bit..."
comment "Start setup program"
Winbatch_install_64
Sub_check_exitcode
comment "Copy files"
Files_install_64 /64Bit
comment "Patch Registry"
Registry_install /64Bit
comment "Create shortcuts"
LinkFolder_install
endif
endif
[Winbatch_install_32] ; Choose one of the following examples as basis for your installation ; You can use $LicenseKey$ var to pass a license key to the installer ; ;
Nullsoft Scriptable Install System
; “%ScriptPath%\Setup.exe” /S ; ;
MSI package
; You may use the parameter PIDKEY=$Licensekey$ ; msiexec /i “%ScriptPath%\some.msi” /l* “$LogDir$\$ProductId$.install_log.txt” /qb! ALLUSERS=2 REBOOT=ReallySuppress ; ;
InstallShield + MSI
; Attention: The path to the log file should not contain any whitespaces ; “%ScriptPath%\setup.exe” /s /v“ /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=2 REBOOT=ReallySuppress” ; “%ScriptPath%\setup.exe” /s /v“ /qb! ALLUSERS=2 REBOOT=ReallySuppress” ; ;
InstallShield
; Create setup.iss answer file by running: setup.exe /r /f1“c:\setup.iss” ; “%ScriptPath%\setup.exe” /s /sms /f1“%ScriptPath%\setup.iss” /f2“$LogDir$\$ProductId$.install_log.txt” ; ;
Inno Setup
; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html ; You may create setup answer file by: setup.exe /SAVEINF=“filename” ; You may use an answer file by the parameter /LOADINF=“filename” “%ScriptPath%\setup.exe” /sp- /silent /norestart
[Files_install_32] ; Example of recursively copying some files into the installation directory: ; ; copy -s “%ScriptPath%\files\*.*” “$InstallDir32$”
[Winbatch_install_64] ; Choose one of the following examples as basis for your installation ; You can use $LicenseKey$ var to pass a license key to the installer ; ;
Nullsoft Scriptable Install System
; “%ScriptPath%\Setup.exe” /S ; ;
MSI package
; You may use the parameter PIDKEY=$Licensekey$ ; msiexec /i “%ScriptPath%\some.msi” /l* “$LogDir$\$ProductId$.install_log.txt” /qb! ALLUSERS=2 REBOOT=ReallySuppress ; ;
InstallShield + MSI
; Attention: The path to the log file should not contain any whitespaces ; “%ScriptPath%\setup.exe” /s /v“ /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=2 REBOOT=ReallySuppress” ; “%ScriptPath%\setup.exe” /s /v“ /qb! ALLUSERS=2 REBOOT=ReallySuppress” ; ;
InstallShield
; Create setup.iss answer file by running: setup.exe /r /f1“c:\setup.iss” ; “%ScriptPath%\setup.exe” /s /sms /f1“%ScriptPath%\setup.iss” /f2“$LogDir$\$ProductId$.install_log.txt” ; ;
Inno Setup
; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html ; You may create setup answer file by: setup.exe /SAVEINF=“filename” ; You may use an answer file by the parameter /LOADINF=“filename” ; “%ScriptPath%\setup.exe” /sp- /silent /norestart
[Files_install_64] ; Example of recursively copying some files into the installation directory: ; ; copy -s “%ScriptPath%\files\*.*” “$InstallDir64$”
[Registry_install] ; Example of setting some values of an registry key: ; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$] set “name1” = “some string value” set “name2” = REG_DWORD:0001 set “name3” = REG_BINARY:00 af 99 cd
[LinkFolder_install] Example of deleting a folder from AllUsers startmenu:
set_basefolder common_programs delete_subfolder $ProductId$
Example of creating an shortcut to the installed exe in AllUsers startmenu:
set_basefolder common_programs set_subfolder $ProductId$
set_link
name: $ProductId$
target: <path to the program>
parameters:
working_dir: $InstallDir$
icon_file:
icon_index:
end_link
; Example of creating an shortcut to the installed exe on AllUsers desktop: ; set_basefolder common_desktopdirectory set_subfolder “”
set_link
name: $ProductId$
target: <path to the program>
parameters: <some_param>
working_dir: $InstallDir$
icon_file: <path to icon file>
icon_index: 2
end_link
[Sub_get_licensekey] comment “License management is enabled and will be used”
comment “Trying to get a license key” Set $LicenseKey$ = demandLicenseKey ($LicensePool$) ; If there is an assignment of exactly one licensepool to the product the following call is possible: ; Set $LicenseKey$ = demandLicenseKey (“”, $ProductId$) ; ; If there is an assignment of a license pool to a windows software id, it is possible to use: ; DefVar $WindowsSoftwareId$ ; $WindowsSoftwareId$ = “…” ; Set $LicenseKey$ = demandLicenseKey (“”, “”, $WindowsSoftwareId$)
DefVar $ServiceErrorClass$ set $ServiceErrorClass$ = getLastServiceErrorClass comment “Error class: ” + $ServiceErrorClass$
if $ServiceErrorClass$ = “None”
comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
else
if $ServiceErrorClass$ = "LicenseConfigurationError"
LogError "Fatal: license configuration must be corrected"
LogError getLastServiceErrorMessage
isFatalError
else
if $ServiceErrorClass$ = "LicenseMissingError"
LogError "Fatal: required license is not supplied"
isFatalError
endif
endif
endif
[Sub_check_exitcode] comment “Test for installation success via exit code” set $ExitCode$ = getLastExitCode ; informations to exit codes see ; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx ; http://msdn.microsoft.com/en-us/library/aa368542.aspx if ($ExitCode$ = “0”)
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif