====== Blender ======
Adaptation of the opsi-template scripts for Blender: http://www.blender.org/ \\
Get the 32-bit and 64-bit installers from http://www.blender.org/download/\\
Tested on Windows XP and Windows XP x64. Should work with W7, but that is scheduled for later this (or next) year.\\
So we have:\\
%scriptpath%\files\blender-2.70a-windows32.exe\\
%scriptpath%\files\blender-2.70a-windows64.exe\\
==== control file ====
[Package]
version: 1
depends:
incremental: False
[Product]
type: localboot
id: blender
name: Blender
description: Blender is a free and open-source 3D computer graphics program.
advice: Install this application if you want to create and render 3D models and art.
version: 2.70a
priority: 0
licenseRequired: False
productClasses:
setupScript: setup3264.ins
uninstallScript: uninstall3264.ins
updateScript:
alwaysScript:
onceScript:
customScript:
userLoginScript:
[Changelog]
blender (2.70a-1) testing; urgency=low
* Initial package
-- ICT Fri, 09 May 2014 15:40:36 +0000
==== setup3264.ins ====
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
;
; License Management removed
[Actions]
requiredWinstVersion >= "4.10.8.6"
;DefVar $MsiId32$
DefVar $UninstallProgram32$
;DefVar $MsiId64$
DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $INST_SystemType$
;DefVar $INST_architecture$
DefVar $INST_MsVersion$
set $INST_MsVersion$ = GetMsVersionInfo
Set $INST_SystemType$ = GetSystemType
;set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
Set $ProductId$ = "blender"
Set $MinimumSpace$ = "1000 MB"
; the path were we find the product after the installation
Set $InstallDir32$ = "%ProgramFiles32Dir%\Blender Foundation\Blender"
Set $InstallDir64$ = "%ProgramFiles64Dir%\Blender Foundation\Blender"
; ----------------------------------------------------------------
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
isFatalError
; Stop process and set installation status to failed
endif
if $INST_MsVersion$ < "5.1"
LogError "Windows XP or newer is required for " + $ProductId$
isFatalError
endif
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
if FileExists("%ScriptPath%\delsub3264.ins")
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub3264.ins"
endif
comment "installing"
if ($INST_SystemType$ = "x86 System")
;and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Installing " + $ProductId$ + "..."
comment "Start setup program"
Winbatch_install_32
Sub_check_exitcode
comment "Copy files"
Files_install_32 /32Bit
comment "Patch Registry"
Registry_install /32Bit
Registry_install_AllProfiles /AllNTUserDats
comment "Create shortcuts"
LinkFolder_install
endif
if ($INST_SystemType$ = "64 Bit System")
;and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Installing " + $ProductId$ + "..."
comment "Start setup program"
Winbatch_install_64
Sub_check_exitcode
comment "Copy files"
Files_install_64 /64Bit
comment "Patch Registry"
Registry_install /64Bit
Registry_install_AllProfiles /AllNTUserDats
comment "Create shortcuts"
LinkFolder_install
endif
[Winbatch_install_32]
"%ScriptPath%\files\blender-2.70a-windows32.exe" /S /D="$InstallDir32$"
[Files_install_32]
; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir32$"
[Winbatch_install_64]
"%ScriptPath%\files\blender-2.70a-windows64.exe" /S /D="$InstallDir64$"
[Files_install_64]
; Example of recursively copying some files into the installation directory:
;
; copy -s "%ScriptPath%\files\*.*" "$InstallDir64$"
[Registry_install]
; Example of setting some values of an registry key:
;
; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
; set "name1" = "some string value"
; set "name2" = REG_DWORD:0001
; set "name3" = REG_BINARY:00 af 99 cd
[Registry_install_AllProfiles]
; Remove stored start menu order
deletekey [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu]
[LinkFolder_install]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
; set_basefolder common_programs
; set_subfolder $ProductId$
;
; set_link
; name: $ProductId$
; target:
; parameters:
; working_dir: $InstallDir$
; icon_file:
; icon_index:
; end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
;
; set_link
; name: $ProductId$
; target:
; parameters:
; working_dir: $InstallDir$
; icon_file:
; icon_index: 2
; end_link
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif
==== uninstall3264.ins ====
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
;
; License Management removed
[Actions]
requiredWinstVersion >= "4.10.8.6"
;DefVar $MsiId32$
DefVar $UninstallProgram32$
;DefVar $MsiId64$
DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $INST_SystemType$
;DefVar $INST_architecture$
Set $INST_SystemType$ = GetSystemType
;set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
Set $ProductId$ = "blender"
Set $InstallDir32$ = "%ProgramFiles32Dir%\Blender Foundation\Blender"
Set $InstallDir64$ = "%ProgramFiles64Dir%\Blender Foundation\Blender"
; ----------------------------------------------------------------
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
Message "Uninstalling " + $ProductId$ + " ..."
if FileExists("%ScriptPath%\delsub3264.ins")
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub3264.ins"
endif
==== delsub3264.ins ====
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
;
; License Management removed
;DefStringList $result$
;DefStringList $result1$
;DefVar $appKey$
;DefVar $UninstallCommandList$
;DefVar $appString$
;DefVar $appKeyString$
;DefVar $testName$
;DefVar $exeString$
;Set $appKeyString$ = "DisplayName"
;Set $appString$ = $ProductId$
;Set $MsiId32$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
Set $UninstallProgram32$ = $InstallDir32$ + "\uninstall.exe"
;Set $MsiId64$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
Set $UninstallProgram64$ = $InstallDir64$ + "\uninstall.exe"
if ($INST_SystemType$ = "x86 System")
;and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Uninstalling " + $ProductId$ + "..."
; Set $result$ = getRegistryKeyList32("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall")
; for $app$ in $result$ do Sub_searchApp32
; if not ($UninstallCommandList$ = "")
; set $result1$ = splitString($UninstallCommandList$,"::")
; for $UninstallCommand$ in $result1$ do Winbatch_uninstall_32 /32Bit
; sub_check_exitcode
; endif
if FileExists($UninstallProgram32$)
comment "Uninstall program found, starting uninstall"
Winbatch_uninstall_32
sub_check_exitcode
endif
; if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId32$ + "] DisplayName") = "")
; comment "MSI id " + $MsiId32$ + " found in registry, starting msiexec to uninstall"
; Winbatch_uninstall_msi_32
; sub_check_exitcode
; endif
comment "Delete files"
Files_uninstall_32 /32Bit
Files_uninstall_AllProfiles /AllNtUserProfiles
comment "Cleanup registry"
Registry_uninstall /32Bit
Registry_uninstall_AllProfiles /AllNTUserDats
endif
if ($INST_SystemType$ = "64 Bit System")
;and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Uninstalling " + $ProductId$ + "..."
; Set $result$ = getRegistryKeyList64("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall")
; for $app$ in $result$ do Sub_searchApp64
; if not ($UninstallCommandList$ = "")
; set $result1$ = splitString($UninstallCommandList$,"::")
; for $UninstallCommand$ in $result1$ do Winbatch_uninstall_64 /64Bit
; sub_check_exitcode
; endif
; Set $result$ = getRegistryKeyList32("HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall")
; for $app$ in $result$ do Sub_searchApp32
; if not ($UninstallCommandList$ = "")
; set $result1$ = splitString($UninstallCommandList$,"::")
; for $UninstallCommand$ in $result1$ do Winbatch_uninstall_32 /32Bit
; sub_check_exitcode
; endif
if FileExists($UninstallProgram64$)
comment "Uninstall program found, starting uninstall"
Winbatch_uninstall_64
sub_check_exitcode
endif
; if not (GetRegistryStringValue64("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId64$ + "] DisplayName") = "")
; comment "MSI id " + $MsiId64$ + " found in registry, starting msiexec to uninstall"
; Winbatch_uninstall_msi_64
; sub_check_exitcode
; endif
comment "Delete files"
Files_uninstall_64 /64Bit
Files_uninstall_AllProfiles /AllNtUserProfiles
comment "Cleanup registry"
Registry_uninstall /64Bit
Registry_uninstall_AllProfiles /AllNTUserDats
endif
comment "Delete program shortcuts"
LinkFolder_uninstall
[Winbatch_uninstall_32]
"$UninstallProgram32$" /S
[Files_uninstall_32]
delete -sf "$InstallDir32$\"
[Winbatch_uninstall_64]
"$UninstallProgram64$" /S
[Files_uninstall_64]
delete -sf "$InstallDir64$\"
[Files_uninstall_AllProfiles]
delete -sf "%UserProfileDir%\Application Data\Blender Foundation\"
delete -sf "%UserProfileDir%\.thumbnails\"
[Registry_uninstall]
; Example of deleting a registry key:
;
; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
[Registry_uninstall_AllProfiles]
[LinkFolder_uninstall]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of deleting a shortcut from AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
; delete_element $ProductId$
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif
[Sub_searchApp32]
set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] " + $appKeyString$
Set $testName$ = GetRegistryStringValue32($appKey$)
if contains($testName$,$appString$)
; set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] UninstallString"
; Set $testName$ = GetRegistryStringValue32($appKey$)
;if contains(lower($testName$),lower("MsiExec.exe"))
set $UninstallCommandList$ = $UninstallCommandList$ + "MsiExec.exe /x " + "$app$" + " /qb-! REBOOT=ReallySuppress::"
;else
; Set $testName$ = unquote($testName$,'"')
; Set $testName$ = unquote($testName$,"'")
; Set $exeString$ = takeString(0, splitString ($testName$, "exe"))
; set $UninstallCommandList$ = $UninstallCommandList$ + $exeString$ + "exe /S::"
;endif
endif
[Sub_searchApp64]
set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] " + $appKeyString$
Set $testName$ = GetRegistryStringValue64($appKey$)
if contains($testName$,$appString$)
; set $appKey$ = "[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + "$app$" + "] UninstallString"
; Set $testName$ = GetRegistryStringValue64($appKey$)
;if contains(lower($testName$),lower("MsiExec.exe"))
set $UninstallCommandList$ = $UninstallCommandList$ + "MsiExec.exe /x " + "$app$" + " /qb-! REBOOT=ReallySuppress::"
;else
; Set $testName$ = unquote($testName$,'"')
; Set $testName$ = unquote($testName$,"'")
; Set $exeString$ = takeString(0, splitString ($testName$, "exe"))
; set $UninstallCommandList$ = $UninstallCommandList$ + '"' + $exeString$ + 'exe /S"::'
;endif
endif