====== Citavi ======
Script by  --- //[[tobias.friede@wki.fraunhofer.de|tobias]] 2012/12/20 09:23// 

This Scribt is based on the UIB OPSI-Template

==== Setup32.ins ====
<code winst>
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/

[Actions]
requiredWinstVersion >= "4.10.8.6"

DefVar $MsiId$
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ProductId$  
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$

Set $LogDir$ = "%SystemDrive%\tmp"

; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts, 
; no white space use '-' as a seperator
Set $ProductId$       = "Citavi"
Set $MinimumSpace$    = "500 MB"
; the path were we find the product after the installation
Set $InstallDir$      = "%ProgramFiles32Dir%\Citavi"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
; ----------------------------------------------------------------

if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
else
	comment "Show product picture"
	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
	
	if FileExists("%ScriptPath%\delsub32.ins")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub32.ins"
	endif
	
	Message "Installing " + $ProductId$ + " ..."
	
	if $LicenseRequired$ = "true"
		comment "Licensing required, reserve license and get license key"
		Sub_get_licensekey
	endif
	
	comment "Start setup program"
	Winbatch_install
	Sub_check_exitcode
	
	comment "Copy files"
	Files_install /32Bit
	
	comment "Patch Registry"
	Registry_install /32Bit
	
	comment "Create shortcuts"
	LinkFolder_install
	
	comment "Test for installation success"
	; Test if software marked as installed in registry
	; if (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}] DisplayName") = "")
	; 	logError "Fatal: After Installation 32 bit [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}] not found"
	; 	isFatalError
	; else
	; 	comment "Successful Installation"
	; endif

endif

[Winbatch_install]
; Choose one of the following examples as basis for your installation
; You can use $LicenseKey$ var to pass a license key to the installer
;
; === Nullsoft Scriptable Install System ================================================================
; "%ScriptPath%\Setup.exe" /S
;
; === MSI package =======================================================================================
; You may use the parameter PIDKEY=$Licensekey$
 msiexec /i "%ScriptPath%\files\setup.msi" /l* "$LogDir$\$ProductId$.install_log.txt" ALLUSERS=2 REBOOT=ReallySuppress
;
; === InstallShield + MSI=====================================================================================
; Attention: The path to the log file should not contain any whitespaces
; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=2 REBOOT=ReallySuppress"
; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress"
;
; === InstallShield =====================================================================================
; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss"
; "%ScriptPath%\setup.exe" /s /sms /f1"%ScriptPath%\setup.iss" /f2"$LogDir$\$ProductId$.install_log.txt"
;
; === Inno Setup ========================================================================================
; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html
; You may create setup answer file by: setup.exe /SAVEINF="filename"
; You may use an answer file by the parameter /LOADINF="filename"
; "%ScriptPath%\setup.exe" /sp- /silent /norestart /SUPPRESSMSGBOXES

[Files_install]
; Example of recursively copying some files into the installation directory:
;
 

[Registry_install]
; Example of setting some values of an registry key:
;
; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
; set "name1" = "some string value"
; set "name2" = REG_DWORD:0001
; set "name3" = REG_BINARY:00 af 99 cd

[LinkFolder_install]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of creating an shortcut to the installed exe in AllUsers startmenu:
;
; set_basefolder common_programs
; set_subfolder $ProductId$
;
; set_link
; 	name: $ProductId$
; 	target: <path to the program>
; 	parameters:
; 	working_dir: $InstallDir$
; 	icon_file:
; 	icon_index:
; end_link
;
; Example of creating an shortcut to the installed exe on AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
;
; set_link
; 	name: $ProductId$
; 	target: <path to the program>
; 	parameters: <some_param>
; 	working_dir: $InstallDir$
; 	icon_file: <path to icon file>
; 	icon_index: 2
; end_link

[Sub_get_licensekey]
if opsiLicenseManagementEnabled
	comment "License management is enabled and will be used"

	comment "Trying to get a license key"
	Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
	; If there is an assignment of exactly one licensepool to the product the following call is possible:
	; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
	;
	; If there is an assignment of a license pool to a windows software id, it is possible to use:
	; DefVar $WindowsSoftwareId$
	; $WindowsSoftwareId$ = "..."
	; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
	
	DefVar $ServiceErrorClass$
	set $ServiceErrorClass$ = getLastServiceErrorClass
	comment "Error class: " + $ServiceErrorClass$
	
	if $ServiceErrorClass$ = "None"
		comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
	else
		if $ServiceErrorClass$ = "LicenseConfigurationError"
			LogError "Fatal: license configuration must be corrected"
			LogError getLastServiceErrorMessage
			isFatalError
		else 
			if $ServiceErrorClass$ = "LicenseMissingError"
				LogError "Fatal: required license is not supplied"
				isFatalError
			endif
		endif
	endif
else
	LogError "Fatal: license required, but license management not enabled"
	isFatalError
endif


[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif
</code>

==== uninstall32.ins ====
<code winst>
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/

[Actions]
requiredWinstVersion >= "4.10.8.6"

DefVar $MsiId$
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir$
DefVar $LicenseRequired$
DefVar $LicensePool$

Set $LogDir$ = "%SystemDrive%\tmp"

; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "Citavi"
Set $InstallDir$      = "%ProgramFiles32Dir%\Citavi"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
; ----------------------------------------------------------------


comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$

Message "Uninstalling " + $ProductId$ + " ..."

if FileExists("%ScriptPath%\delsub32.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub32.ins"
endif

if $LicenseRequired$ = "true"
	comment "Licensing required, free license used"
	Sub_free_license
endif

[Sub_free_license]
comment "License management is enabled and will be used"

comment "Trying to free license used for the product"
DefVar $result$
Set $result$ = FreeLicense($LicensePool$)
; If there is an assignment of a license pool to the product, it is possible to use
; Set $result$ = FreeLicense("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
</code>

==== delsub.ins ====
<code winst>
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/


Set $MsiId$ = '{E12C6653-1FF0-4686-ADB8-589C13AE761F}'
Set $UninstallProgram$ = $InstallDir$ + "\uninstall.exe"

Message "Uninstalling " + $ProductId$ + " ..."

if FileExists($UninstallProgram$)
	comment "Uninstall program found, starting uninstall"
	Winbatch_uninstall
	sub_check_exitcode
endif
if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "")
	comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall"
	Winbatch_uninstall_msi
	sub_check_exitcode
endif

comment "Delete files"
Files_uninstall /32Bit

comment "Cleanup registry"
Registry_uninstall /32Bit

comment "Delete program shortcuts"
LinkFolder_uninstall

[Winbatch_uninstall]
; Choose one of the following examples as basis for program uninstall
;
; === Nullsoft Scriptable Install System ================================================================
; "$UninstallProgram$" /S
;
; === Inno Setup ========================================================================================
; "$UninstallProgram$" /silent /norestart /SUPPRESSMSGBOXES


[Winbatch_uninstall_msi]
msiexec $MsiId$ /q

[Files_uninstall]
; Example for recursively deleting the installation directory (don't forget the trailing backslash):
;
; delete -sf "$InstallDir$\"

[Registry_uninstall]
; Example of deleting a registry key:
;
; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]

[LinkFolder_uninstall]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of deleting a shortcut from AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
; delete_element $ProductId$

[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif
</code>