====== Microsoft Office 2010 / Pro (64 Bit ) ======

Tested with opsi 4.0.1 \\
requiredWinstVersion >= 4.10.8.6\\
For 64 Bit\\
By  //[[hungerharke@gmx.de|Thomas_H]] 2011/10/27 12:58//

Steps:
  - copy all files of Setup-CD to CLIENT_DATA
  - Copy the "config.xml" to CLIENT_DATA/ProPlus.WW


To avoid collisions between 32 and 64 Bit-Office you better have separate opsi-packages for each version.

==== setup.ins ====

<code winst>
[Initial]
LogLevel=9
;  Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; let started programs run in front of the winst window
StayOnTop=false


[Actions]
requiredWinstVersion >= "4.10.8.6"

DefVar $MsiId32$
DefVar $UninstallProgram32$
DefVar $MsiId64$
DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $Version$
DefVar $Inst_Cmd32$
DefVar $Inst_Cmd64$
DefVar $Inst_Prg$
DefVar $Uninst_Cmd$
DefVar $Uninst_Prg$

Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")


Set $LogDir$ = "%SystemDrive%\tmp"

; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
Set $ProductId$       = "Microsoft-Office (64 Bit)"
Set $Version$         = "2011"
Set $MinimumSpace$    = "30 MB"
; the path were we find the product after the installation
Set $InstallDir32$      = "%ProgramFiles32Dir%\Microsoft Office"
Set $InstallDir64$      = "%ProgramFiles64Dir%\Microsoft Office"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
Set $Inst_Prg$ = "setup.exe"
Set $Inst_Cmd64$ = '/config'
Set $Uninst_Cmd$ = ""
Set $Uninst_Prg$ = ""
; ----------------------------------------------------------------

if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
        LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
        isFatalError
        ; Stop process and set installation status to failed
else
        comment "Show product picture"
        ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$

        if $LicenseRequired$ = "true"
                comment "Licensing required, reserve license and get license key"
                Sub_get_licensekey
        endif

        comment "Installiere Microsoft Office 2010 (64 Bit)..."

        if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
                Message "Dieses Produkt ist nur fuer 64 Bit OS!"
                comment "Fatal: for 64 Bit OS only!"
                isFatalError
                Sub_check_exitcode
        endif

        if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
                Message "Installiere " + $ProductId$ + ". Das kann etwas laenger dauern, bitte Geduld..."
                comment "Start setup program"
                Winbatch_install_64
                Files_delete_64
                Sub_check_exitcode
        endif

endif

[Winbatch_install_64]
; Choose one of the following examples as basis for your installation
; You can use $LicenseKey$ var to pass a license key to the installer
;
; === Nullsoft Scriptable Install System ================================================================
%ScriptPath%\$Inst_Prg$ $Inst_Cmd64$ "%Scriptpath%\ProPlus.WW\config.xml"

[Files_delete_64]
; Example of recursively copying some files into the installation directory:
;
delete /s "$InstallDir64$\*.*"


[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
if ($ExitCode$ = "0")
        comment "Looks good: setup program gives exitcode zero"
else
        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
        if ($ExitCode$ = "1605")
                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
                comment "Uninstall of a not installed product failed - no problem"
        else
                if ($ExitCode$ = "1641")
                        comment "looks good: setup program gives exitcode 1641"
                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
                else
                        if ($ExitCode$ = "3010")
                                comment "looks good: setup program gives exitcode 3010"
                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
                        else
                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
                                isFatalError
                        endif
                endif
        endif
endif

</code>

==== uninstall.ins ====

<code winst>
[Initial]
LogLevel=9
;  Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; let started programs run in front of the winst window
StayOnTop=false

[Actions]
requiredWinstVersion >= "4.10.8.6"

DefVar $MsiId32$
DefVar $UninstallProgram32$
DefVar $MsiId64$
DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $LicenseRequired$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $Uninst_Cmd$
DefVar $Uninst_Prg$

Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")


Set $LogDir$ = "%SystemDrive%\tmp"

; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "Microsoft Office (64 Bit)"
Set $InstallDir32$    = "%ProgramFiles32Dir%\Microsoft Office"
Set $InstallDir64$    = "%ProgramFiles64Dir%\Microsoft Office"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
Set $Uninst_Prg$        = "setup.exe"
Set $Uninst_Cmd$        = " /uninstall ProPlus /config "
; ----------------------------------------------------------------

comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$

Message "Deinstalliere " + $ProductId$ + ". Bitte etwas Geduld..."

if FileExists($InstallDir64$+"\"+$Uninst_Prg$)
    Set $Uninst_Prg$ = $InstallDir64$+"\"+$Uninst_Prg$
    comment "Start uninstall sub section"
    Sub "%ScriptPath%\delsub.ins"
endif

if FileExists("%ScriptPath%\"+$Uninst_Prg$)
    Set $Uninst_Prg$ = "%ScriptPath%\"+$Uninst_Prg$
    comment "Start uninstall sub section"
    Sub "%ScriptPath%\delsub.ins"
endif


if $LicenseRequired$ = "true"
        comment "Licensing required, free license used"
        Sub_free_license
endif

ExitWindows /reboot

[Sub_free_license]
comment "License management is enabled and will be used"

comment "Trying to free license used for the product"
DefVar $result$
Set $result$ = FreeLicense($LicensePool$)
; If there is an assignment of a license pool to the product, it is possible to use
; Set $result$ = FreeLicense("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)

</code>

==== delsub.ins ====

<code winst>

if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
        Message $ProductId$ + " ist nur fuer 64 Bit..."
        comment "Fatal: Nur fuer 32 Bit OS!"
        isFatalError
endif

if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
        Message "Uninstalling " + $ProductId$ + " 64 Bit..."

        if FileExists($Uninst_Prg$)
                comment "Uninstall program found, starting uninstall"
                Winbatch_uninstall_64
                comment "Removing "+$InstallDir64$
;               Files_uninstall_64
                sub_check_exitcode
        endif
endif


[Winbatch_uninstall_64]
; Choose one of the following examples as basis for program uninstall
;
; === Nullsoft Scriptable Install System ================================================================
; "$UninstallProgram64$" /S
;
; === Inno Setup ========================================================================================
; "$UninstallProgram64$" /silent /norestart

"$Uninst_Prg$" $Uninst_Cmd$ "%ScriptPath%\ProPlus.WW\SilentUninstallConfig.xml"

[Files_uninstall_64]
; Example for recursively deleting the installation directory (don't forget the trailing backslash):
;
delete -sf "$InstallDir64$\"

[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
        comment "Looks good: setup program gives exitcode zero"
else
        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
        if ($ExitCode$ = "1605")
                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
                comment "Uninstall of a not installed product failed - no problem"
        else
                if ($ExitCode$ = "1641")
                        comment "looks good: setup program gives exitcode 1641"
                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
                else
                        if ($ExitCode$ = "3010")
                                comment "looks good: setup program gives exitcode 3010"
                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
                        else
                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
                                isFatalError
                        endif
                endif
        endif
endif

</code>


==== SilentUninstallConfig.xml ====

<code>
<Configuration Product="ProPlus">
<Display Level="basic" CompletionNotice="No" SuppressModal="Yes" AcceptEula="Yes" NoCancel="Yes" /> -->
<Setting Id="SETUP_REBOOT" Value="Never" /> -->
</Configuration>
</code>

You'll have to change some informations in the config.xml. This config.xml will install Word, Excel, Powerpoint and Outlook as local installed applications. MS-Access will installed if needed, also all other components, which are dispensable (in my humble opinion). This config.xml is for the unpatient boss in the company... :))

  * Search for "<LIS SOURCELIST" and change the complete path to the server the installfiles are avail also for the user. Needed, if other components of Office should be installed. Delete the "<!--" at the beginning of the line and the --> at the end of the line when adding the installation-server
  * Search for "MyOrganisation" and change it to the name of your organisation.
  * Normally the language should be set to the language of the OS. You can add more by removing the "<!--" at the beginning of the line and the --> at the end of the line of each other language.
  * Search for "MyRegKey_MyRegKey" and replace it with the registration-key of your Office-Product.

==== config.xml ====

<code>
<Configuration Product="ProPlus">

        <Display Level="basic" CompletionNotice="No" SuppressModal="Yes" AcceptEula="Yes" NoCancel="Yes" /> -->

        <!-- <Logging Type="standard" Path="%temp%" Template="Microsoft Office Professional Plus Setup(*).txt" /> -->

        <USERNAME Value="MyOrganisation" /> -->

        <COMPANYNAME Value="MyCompany" /> -->
        
        <PIDKEY Value="MyRegKey_MyRegKey" />

        <AddLanguage Id="match" ShellTransform="yes"/>
        <!-- <AddLanguage Id="en-us" /> -->
        <!-- <AddLanguage Id="fr-fr" /> --> 
        <!-- <AddLanguage Id="de-de" /> -->
        <!-- <AddLanguage Id="es-es" /> -->

        <!-- <INSTALLLOCATION Value="%programfiles%\Microsoft Office" /> -->

        <!-- <LIS CACHEACTION="CacheOnly" /> -->

        <!-- <LIS SOURCELIST="\\server1\share\Office;\\server2\share\Office" /> -->

        <!-- <DistributionPoint Location="\\server\share\Office" /> -->

        <!-- <OptionState Id="OptionID" State="absent" Children="force" /> -->

        <!-- <Setting Id="SETUP_REBOOT" Value="IfNeeded" /> -->

        <!-- <Command Path="%windir%\system32\msiexec.exe" Args="/i \\server\share\my.msi" QuietArg="/q" ChainPosition="after" Execute="install" /> -->

</Configuration>
</code>