====== PDF-XChange (Lite) for 32 and 64 Bit ======

Tested with opsi 4.0.1\\
requiredWinstVersion >= 4.10.8.6\\
For 32 Bit and 64 Bit\\
Installationfiles are available at: http://www.tracker-software.com/product/downloads

By:  //[[hungerharke@gmx.de|Thomas_H]] 2011/10/28 09:13//

**Tree:**
<code>
PDF-XChange (32 Bit).jpg
PXCViewer_x64.msi
PXCViewer_x86.msi
delsub.ins
setup.ins
uninstall.ins
</code>

==== Steps ====
  - Download the PDF-XChange Viewer, get the "MSI Network Installer (32 bit)" and the "MSI Network Installer (64 bit)".
  - Copy both files to the CLIENT_DATA-directory

==== setup.ins ====
<code winst>
[Initial]
SetLogLevel=9
;  Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; let started programs run in front of the winst window
StayOnTop=false


[Actions]
requiredWinstVersion >= "4.10.8.6"

DefVar $MsiId32$
DefVar $MsiId64$
DefVar $LogDir$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $Version$
DefVar $Inst_Cmd$
DefVar $Inst_Prg32$
DefVar $Inst_Prg64$
DefVar $Uninst_Cmd$

Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")


Set $LogDir$ = "%SystemDrive%\tmp"

; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
Set $ProductId$       = "PDF-XChange"
Set $Version$         = "2.5.197"
Set $MinimumSpace$    = "10 MB"
; the path were we find the product after the installation
Set $InstallDir32$      = "%ProgramFiles32Dir%\Tracker Software\PDF Viewer\"
Set $InstallDir64$      = "%ProgramFiles64Dir%\Tracker Software\PDF Viewer\"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
Set $Inst_Prg32$      = "PXCViewer_x86.msi"
Set $Inst_Prg64$      = "PXCViewer_x64.msi"
Set $Inst_Cmd$        = '/qr /passive /i'
Set $Uninst_Cmd$      = '/qr /passive /x'
; ----------------------------------------------------------------

comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$

if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
        LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
        isFatalError
        ; Stop process and set installation status to failed
else

        if FileExists("%ScriptPath%\delsub.ins")
                comment "Start uninstall sub section"
                Sub "%ScriptPath%\delsub.ins"
        endif

        if $LicenseRequired$ = "true"
                comment "Licensing required, reserve license and get license key"
                Sub_get_licensekey
        endif

        comment "Installing "+$ProductID$+"..."

        if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
                Message "Installing " + $ProductId$+" (32 Bit)"
                comment "Start setup program"
                comment "%System%\msiexec.exe /qr /passive /i %ScriptPath%\$Inst_Prg32$"
                Winbatch_install_32
                Sub_check_exitcode
        endif

        if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
                Message "Installing " + $ProductId$+" (64 Bit)"
                comment "Start setup program"
                comment "%System%\msiexec.exe /qr /passive /i %ScriptPath%\$Inst_Prg64$"
                Winbatch_install_64
                Sub_check_exitcode
        endif

endif

[Winbatch_install_32]
%System%\msiexec.exe $Inst_Cmd$ %ScriptPath%\$Inst_Prg32$

[Winbatch_install_64]
%System%\msiexec.exe $Inst_Cmd$ %ScriptPath%\$Inst_Prg64$


[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
if ($ExitCode$ = "0")
        comment "Looks good: setup program gives exitcode zero"
else
        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
        if ($ExitCode$ = "1605")
                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
                comment "Uninstall of a not installed product failed - no problem"
        else
                if ($ExitCode$ = "1641")
                        comment "looks good: setup program gives exitcode 1641"
                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
                else
                        if ($ExitCode$ = "3010")
                                comment "looks good: setup program gives exitcode 3010"
                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
                        else
                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
                                isFatalError
                        endif
                endif
        endif
endif

</code>

==== uninstall.ins ====
<code winst>
[Initial]
SetLogLevel=9
;  Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; let started programs run in front of the winst window
StayOnTop=false

[Actions]
requiredWinstVersion >= "4.10.8.6"

DefVar $MsiId32$
DefVar $UninstallProgram32$
DefVar $MsiId64$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $LicenseRequired$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $Uninst_Cmd$
DefVar $Inst_Prg32$
DefVar $Inst_Prg64$

Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")


Set $LogDir$ = "%SystemDrive%\tmp"

; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$         = "PDF-XChange (32 Bit)"
Set $InstallDir32$      = "%ProgramFiles32Dir%\Tracker Software\PDF Viewer\"
Set $LicenseRequired$   = "false"
Set $LicensePool$       = "p_" + $ProductId$
Set $Inst_Prg32$          = "PXCViewer_x86.msi"
Set $Inst_Prg64$          = "PXCViewer_x64.msi"
Set $Uninst_Cmd$        = '/qr /passive /x'
; ----------------------------------------------------------------

comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$

Message "Uninstalling " + $ProductId$ + ". Please be patient..."
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub.ins"

if $LicenseRequired$ = "true"
        comment "Licensing required, free license used"
        Sub_free_license
endif

</code>

==== delsub.ins ====
<code winst>
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
        Message "Uninstalling " + $ProductId$ + " 32 Bit..."
        Winbatch_uninstall_32
        sub_check_exitcode
        comment "Removing "+$InstallDir32$
        Files_uninstall_32
endif

if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
        Message "Uninstalling " + $ProductId$ + " 64 Bit..."
        Winbatch_uninstall_64
        sub_check_exitcode
        comment "Removing "+$InstallDir64$
        Files_uninstall_64
endif


[Winbatch_uninstall_32]
%System%\msiexec.exe $Uninst_Cmd$ %ScriptPath%\$Inst_Prg32$

[Winbatch_uninstall_64]
%System%\msiexec.exe $Uninst_Cmd$ %ScriptPath%\$Inst_Prg64$

[Files_uninstall_32]
delete -sf "$InstallDir32$\"

[Files_uninstall_64]
delete -sf "$InstallDir64$\"

[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
        comment "Looks good: setup program gives exitcode zero"
else
        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
        if ($ExitCode$ = "1605")
                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
                comment "Uninstall of a not installed product failed - no problem"
        else
                if ($ExitCode$ = "1641")
                        comment "looks good: setup program gives exitcode 1641"
                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
                else
                        if ($ExitCode$ = "3010")
                                comment "looks good: setup program gives exitcode 3010"
                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
                        else
                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
                                isFatalError
                        endif
                endif
        endif
endif
</code>