Tested with opsi 4.0.1
requiredWinstVersion >= 4.10.8.6
By Thomas_H 2011/10/27 15:57
The installion-files can be downloaded from: http://cdburnerxp.se/
Tree:
├ CDBurnerXP.jpg
├ cdbxp_setup_x.y.z.1234.exe
├ cdbxp_setup_x.y.z.1234_x64.exe
├ default.cfg
├ delsub.ins
├ setup.ins
└ uninstall.ins
Last checks:
Thomas_H 2019/05/14 11:45
[Initial]
SetLogLevel=9
; Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; let started programs run in front of the winst window
StayOnTop=false
[Actions]
requiredWinstVersion >= "4.10.8.6"
DefVar $LogDir$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $Version$
DefVar $Inst_Cmd$
DefVar $Inst_Prg32$
DefVar $Inst_Prg64$
DefVar $Uninst_Cmd$
DefVar $Uninst_Prg$
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
Set $ProductId$ = "CDBurnerXP"
Set $Version$ = "4.5.8.7032"
Set $MinimumSpace$ = "13 MB"
; the path were we find the product after the installation
Set $InstallDir32$ = "%ProgramFiles32Dir%\CDBurnerXP\"
Set $InstallDir64$ = "%ProgramFiles64Dir%\CDBurnerXP\"
Set $LicenseRequired$ = "false"
Set $LicensePool$ = "p_" + $ProductId$
Set $Inst_Prg32$ = "cdbxp_setup_" + $Version$ + ".exe"
Set $Inst_Prg64$ = "cdbxp_setup_" + $Version$ + "_x64.exe"
Set $Uninst_Prg$ = "unins000.exe"
Set $Inst_Cmd$ = '/VERYSILENT /LOADINF=%ScriptPath%\default.cfg'
Set $Uninst_Cmd$ = '/VERYSILENT /SUPPRESSMSGBOXES /NORESTART'
; ----------------------------------------------------------------
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
isFatalError
; Stop process and set installation status to failed
else
if FileExists("$InstallDir32$$Uninst_Prg")
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub.ins"
endif
if FileExists("$InstallDir64$$Uninst_Prg")
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub.ins"
endif
if $LicenseRequired$ = "true"
comment "Licensing required, reserve license and get license key"
Sub_get_licensekey
endif
comment "Installiere "+$ProductID$+"..."
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Installiere " + $ProductId$+" (32 Bit)"
comment "Start setup program"
Winbatch_install_32
Sub_check_exitcode
endif
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Installiere " + $ProductId$+" (64 Bit)"
comment "Start setup program"
Winbatch_install_64
Sub_check_exitcode
endif
endif
[Winbatch_install_32]
%ScriptPath%\$Inst_Prg32$ $Inst_Cmd$
[Winbatch_install_64]
%ScriptPath%\$Inst_Prg64$ $Inst_Cmd$
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif
[Initial]
LogLevel=9
; Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; let started programs run in front of the winst window
StayOnTop=false
[Actions]
requiredWinstVersion >= "4.10.8.6"
DefVar $UninstallProgram32$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $LicenseRequired$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $Uninst_Cmd$
DefVar $Uninst_Prg$
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
Set $ProductId$ = "CDBurnerXP"
Set $InstallDir32$ = "%ProgramFiles32Dir%\CDBurnerXP\"
Set $InstallDir64$ = "%ProgramFiles64Dir%\CDBurnerXP\"
Set $LicenseRequired$ = "false"
Set $LicensePool$ = "p_" + $ProductId$
Set $Uninst_Prg$ = "unins000.exe"
Set $Uninst_Cmd$ = '/SILENT /SUPPRESSMSGBOXES /NORESTART'
; ----------------------------------------------------------------
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$
Message "Deinstalliere " + $ProductId$ + ". Bitte etwas Geduld..."
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub.ins"
if $LicenseRequired$ = "true"
comment "Licensing required, free license used"
Sub_free_license
endif
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Uninstalling " + $ProductId$ + " 32 Bit..."
Winbatch_uninstall_32
comment "Removing "+$InstallDir32$
Files_uninstall_32
sub_check_exitcode
Mendif
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Uninstalling " + $ProductId$ + " 64 Bit..."
Winbatch_uninstall_64
comment "Removing "+$InstallDir64$
Files_uninstall_64
sub_check_exitcode
endif
[Winbatch_uninstall_32]
"$InstallDir32$\$Uninst_Prg$" $Uninst_Cmd$
[Winbatch_uninstall_64]
"$InstallDir64$\$Uninst_Prg$" $Uninst_Cmd$
[Files_uninstall_32]
delete -sf "$InstallDir32$\"
[Files_uninstall_64]
delete -sf "$InstallDir64$\"
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif
[Setup] Lang=German Dir=C:\Programme\CDBurnerXP Group=CDBurnerXP NoIcons=0 SetupType=custom Components=main,nmsaccess,lang,lang\germany Tasks=desktopicon,desktopicon\common,fileassoc,isoassoc