Table of Contents

Notepad++

Versions
By Matteo Cristofaro 2012/08/17 19:00

Tested with opsi xxxxx
requiredWinstVersion >= 4.10.8.6 By Matteo Cristofaro 2012/08/17 19:00

Das Setup-File wird im ScriptPath in einem Unterverzeichnis “setup” abgelegt, also “CLIENT_DATA\setup\npp.6.1.5.Installer.exe”

Tree:
delsub.ins
notepad_plusplus.png
setup\npp.6.1.5.Installer.exe
setup.ins
uninstall.ins

setup.ins

[Actions]
requiredWinstVersion >= "4.10.8.6"
 
DefVar $MsiId$
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ProductId$  
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $SetupFile$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
 
Set $LogDir$ 		= "%SystemDrive%\tmp"
Set $ProductId$       	= "notepad_plusplus"
Set $MinimumSpace$    	= "30 MB"
Set $InstallDir$      	= "%ProgramFiles32Dir%\Notepad++"
Set $SetupFile$		= "npp.6.1.5.Installer.exe"
Set $LicenseRequired$ 	= "false"
Set $LicensePool$     	= "p_" + $ProductId$
; ----------------------------------------------------------------
 
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
else
	comment "Show product picture"
	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
	if FileExists("%ScriptPath%\delsub.ins")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub.ins"
	endif
 
	Message "Installing " + $ProductId$ + " ..."
 
	if $LicenseRequired$ = "true"
		comment "Licensing required, reserve license and get license key"
		Sub_get_licensekey
	endif
 
	comment "Start setup program"
	Winbatch_install
	Sub_check_exitcode 
endif
 
[Winbatch_install]
"%ScriptPath%\setup\$SetupFile$" /S
 
 
[Sub_get_licensekey]
if opsiLicenseManagementEnabled
	comment "License management is enabled and will be used"
 
	comment "Trying to get a license key"
	Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
	; If there is an assignment of exactly one licensepool to the product the following call is possible:
	; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
	;
	; If there is an assignment of a license pool to a windows software id, it is possible to use:
	; DefVar $WindowsSoftwareId$
	; $WindowsSoftwareId$ = "..."
	; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
 
	DefVar $ServiceErrorClass$
	set $ServiceErrorClass$ = getLastServiceErrorClass
	comment "Error class: " + $ServiceErrorClass$
 
	if $ServiceErrorClass$ = "None"
		comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
	else
		if $ServiceErrorClass$ = "LicenseConfigurationError"
			LogError "Fatal: license configuration must be corrected"
			LogError getLastServiceErrorMessage
			isFatalError
		else 
			if $ServiceErrorClass$ = "LicenseMissingError"
				LogError "Fatal: required license is not supplied"
				isFatalError
			endif
		endif
	endif
else
	LogError "Fatal: license required, but license management not enabled"
	isFatalError
endif
 
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

delsub.ins

Set $UninstallProgram$ = $InstallDir$ + "\uninstall.exe"
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists($UninstallProgram$)
	comment "Uninstall program found, starting uninstall"
	Winbatch_uninstall
	sub_check_exitcode
endif
 
 
[Winbatch_uninstall]
"$UninstallProgram$" /S
 
 
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

uninstall.ins

[Actions]
requiredWinstVersion >= "4.10.8.6"
 
DefVar $MsiId$
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir$
DefVar $LicenseRequired$
DefVar $LicensePool$
 
Set $LogDir$ 		= "%SystemDrive%\tmp"
Set $ProductId$		= "notepad_plusplus"
Set $InstallDir$      	= "%ProgramFiles32Dir%\Notepad++"
Set $LicenseRequired$ 	= "false"
Set $LicensePool$     	= "p_" + $ProductId$
; ----------------------------------------------------------------
 
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists("%ScriptPath%\delsub.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub.ins"
endif
 
if $LicenseRequired$ = "true"
	comment "Licensing required, free license used"
	Sub_free_license
endif
 
[Sub_free_license]
comment "License management is enabled and will be used"
 
comment "Trying to free license used for the product"
DefVar $result$
Set $result$ = FreeLicense($LicensePool$)
; If there is an assignment of a license pool to the product, it is possible to use
; Set $result$ = FreeLicense("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)