Table of Contents

Octopus Desk UC

Versions
By Matteo Cristofaro 2012/08/17 22:15

Tested with opsi xxxxx
requiredWinstVersion >= 4.10.8.6 By Matteo Cristofaro 2012/08/17 22:15

Der Ordnerinhalt des DeskUC-Setups wird im ScriptPath in einem Unterverzeichnis “setup” abgelegt, also “CLIENT_DATA\setup\*.*”

Tree:
delsub3264.ins
octopus-desk-uc.PNG
setup\*.* (Ordnerinhalt von der CD)
setup3264.ins
uninstall3264.ins

setup3264.ins

[Actions]
requiredWinstVersion >= "4.10.8.6"
 
DefVar $MsiId32$
DefVar $UninstallProgram32$
DefVar $MsiId64$
DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ProductId$  
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $InstProg$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
 
Set $INST_SystemType$ = GetSystemType
Set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
 
Set $LogDir$ 		= "%SystemDrive%\tmp"
Set $ProductId$       	= "octopus-desk-uc"
Set $MinimumSpace$	= "250 MB"
Set $InstallDir32$      = "%ProgramFiles32Dir%\Octopus Desk UC"
Set $InstallDir64$      = "%ProgramFiles64Dir%\Octopus Desk UC"
Set $LicenseRequired$	= "false"
Set $LicensePool$	= "p_" + $ProductId$
; ----------------------------------------------------------------
 
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
else
	comment "Show product picture"
	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
	if FileExists("%ScriptPath%\delsub3264.ins")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub3264.ins"
	endif
 
	if $LicenseRequired$ = "true"
		comment "Licensing required, reserve license and get license key"
		Sub_get_licensekey
	endif
 
	comment "installing"
 
	if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
		Message "Installing " + $ProductId$ + " 32 Bit..."
		comment "Start setup program"
		Winbatch_install_32
		Sub_check_exitcode
		comment "Copy files"
		Files_install_32 /32Bit
	endif
 
	if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
		Message "Installing " + $ProductId$ + " 64 Bit..."
		comment "Start setup program"
		Winbatch_install_64
		Sub_check_exitcode
		comment "Copy files"
		Files_install_64 /64Bit
	endif
 
endif
sleepSeconds 20
 
 
[Winbatch_install_32]
"%ScriptPath%\setup\Octopus Desk UC Client.msi" /qb! ALLUSERS=2 REBOOT=ReallySuppress
 
[Files_install_32]
copy -s "%ScriptPath%\setup\*.*" "$InstallDir32$\setup"
 
[Winbatch_install_64]
"%ScriptPath%\setup\Octopus Desk UC Client.msi" /qb! ALLUSERS=2 REBOOT=ReallySuppress
 
 
[Files_install_64]
copy -s "%ScriptPath%\setup\*.*" "$InstallDir64$\setup"
 
 
[Sub_get_licensekey]
comment "License management is enabled and will be used"
 
comment "Trying to get a license key"
Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
; If there is an assignment of exactly one licensepool to the product the following call is possible:
; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use:
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
 
DefVar $ServiceErrorClass$
set $ServiceErrorClass$ = getLastServiceErrorClass
comment "Error class: " + $ServiceErrorClass$
 
if $ServiceErrorClass$ = "None"
	comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
else
	if $ServiceErrorClass$ = "LicenseConfigurationError"
		LogError "Fatal: license configuration must be corrected"
		LogError getLastServiceErrorMessage
		isFatalError
	else 
		if $ServiceErrorClass$ = "LicenseMissingError"
			LogError "Fatal: required license is not supplied"
			isFatalError
		endif
	endif
endif
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

delsub3264.ins

Set $MsiId32$ = '{46DF44F6-BCC1-4B88-84CA-F3DBAAC9552C}'
Set $MsiId64$ = '{46DF44F6-BCC1-4B88-84CA-F3DBAAC9552C}'
 
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
	Message "Uninstalling " + $ProductId$ + " 32 Bit..."
 
	if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId32$ + "] DisplayName") = "")
		comment "MSI id " + $MsiId32$ + " found in registry, starting msiexec to uninstall"
		Winbatch_uninstall_msi_32
		sub_check_exitcode
	endif
 
	comment "Delete files"
	Files_uninstall_32 /32Bit
endif
 
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
	Message "Uninstalling " + $ProductId$ + " 64 Bit..."
 
	if not (GetRegistryStringValue64("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId64$ + "] DisplayName") = "")
		comment "MSI id " + $MsiId64$ + " found in registry, starting msiexec to uninstall"
		Winbatch_uninstall_msi_64
		sub_check_exitcode
	endif
 
	comment "Delete files"
	Files_uninstall_64 /64Bit
endif
 
comment "Delete program shortcuts"
LinkFolder_uninstall
 
 
[Winbatch_uninstall_msi_32]
msiexec /x $MsiId32$ /qb! REBOOT=ReallySuppress
 
[Files_uninstall_32]
delete -sf "$InstallDir32$\"
 
 
[Winbatch_uninstall_msi_64]
msiexec /x $MsiId64$ /qb! REBOOT=ReallySuppress
 
[Files_uninstall_64]
delete -sf "$InstallDir64$\"
 
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

uninstall3264.ins

[Actions]
requiredWinstVersion >= "4.10.8.6"
 
DefVar $MsiId32$
DefVar $UninstallProgram32$
DefVar $MsiId64$
DefVar $UninstallProgram64$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $LicenseRequired$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
 
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
 
 
Set $LogDir$ 			= "%SystemDrive%\tmp"
Set $ProductId$       	= "octopus-desk-uc"
Set $InstallDir32$      = "%ProgramFiles32Dir%\Octopus Desk UC"
Set $InstallDir64$      = "%ProgramFiles64Dir%\Octopus Desk UC"
Set $LicenseRequired$ 	= "false"
Set $LicensePool$     	= "p_" + $ProductId$
; ----------------------------------------------------------------
 
 
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists("%ScriptPath%\delsub3264.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub3264.ins"
endif
 
if $LicenseRequired$ = "true"
	comment "Licensing required, free license used"
	Sub_free_license
endif
sleepSeconds 20
 
 
[Sub_free_license]
comment "License management is enabled and will be used"
 
comment "Trying to free license used for the product"
DefVar $result$
Set $result$ = FreeLicense($LicensePool$)
; If there is an assignment of a license pool to the product, it is possible to use
; Set $result$ = FreeLicense("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)