yEd Graph Editor

By — ME_AS 2013/09/09

Nachfolgend meine Skripte zum automatischen Installieren von yEd

Bei den ganzen AutoIT Skripten kann man natürlich die Sleep Zeiten am Ende der Skripte auf seine Umgebung anpassen. Ich hab sie hier bewusst höher eingestellt, da der ein oder andere vielleicht noch ältere Rechner einsetzt

PS: Dies ist mein erstes AutoIT Skripte und eines meiner ersten OPSI Skripte - also falls es was zu verbessern gibt, tut euch keinen Zwang an :)

yEd

Tested with opsi 4.0.3.1
Tested with WinstVersion >= 4.11.3.6
Tested with Win7 Pro SP1 32/64bit

Download here

http://www.yworks.com/de/downloads.html#yEd

OPSI_Workbench:

AutoIt3.exe
setup.ins
uninstall.ins
delsub32.ins
yed.png
yEd-3.11_without-JRE_32-bit_setup.exe
yEd-3.11_without-JRE_64-bit_setup.exe
yed32.au3
yed64.au3
yed_uninstall32.au3
yed_uninstall64.au3

setup.ins

[Actions]
requiredWinstVersion >= "4.10.8.6"
 
;Variable Logverzeichnis
DefVar $LogDir$
Set $LogDir$ = "%SystemDrive%\tmp"
;Variable Produktname
DefVar $ProductId$  
Set $ProductId$       = "yEd"
;Variable Freier Speicherplatz
DefVar $MinimumSpace$
Set $MinimumSpace$    = "100 MB"
;Variable Installationsverzeichnis
DefVar $InstallDir$
Set $InstallDir$      = "%ProgramFiles32Dir%\yEd"
;Variable ExitCodes
DefVar $ExitCode$
;Variable für die Ermittlung der Betriebssystem Unterversion
DefVar $NTVersion$
set $NTVersion$ = GetNTVersion
;Variable zur Ermittlung der Systemarchitektur
DefVar $SystemType$
Set $SystemType$ = GetSystemType
 
; ----------------------------------------------------------------
 
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
else
	comment "Show product picture"
	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
	if FileExists("%ScriptPath%\delsub32.ins")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub32.ins"
	endif
endif
 
;OS-Version ermitteln
if ( $NTVersion$ = "Win2K" OR $NTVersion$ = "WinXP" OR $NTVersion$ = "Win NT 5.2" OR $NTVersion$ = "Windows Vista" )
    if $SystemType$ = "x86 System"
	Sub_Uninstall
	Winbatch_Install_32
	Sub_Check_Exitcode
    endif
		if $SystemType$ = "64 Bit System"
		Sub_Uninstall
		Winbatch_Install_64
		Sub_Check_Exitcode
		endif
else
        LogError "Kein kompatibles Betriebssystem installiert"
	isFatalError
endif
 
[Sub_Uninstall]
sub "%scriptpath%\delsub32.ins"
 
[Winbatch_install_32]
%scriptpath%\AutoIt3.exe %scriptpath%\yEd32.au3
 
[Winbatch_install_64]
%scriptpath%\AutoIt3.exe %scriptpath%\yEd64.au3
 
[Sub_check_exitcode]
Sub "%ScriptDrive%\check_exitcode\check_exitcode.ins"

uninstall.ins

[Initial]
;Standard Text, shown during installation
Message = Bitte warten, das Produkt wird Deinstalliert
 
;Set Loglevel
setLogLevel = 6
 
;Stop when errors
ExitOnError = false
 
;Syntax Fehler are shown in a seperate window
ScriptErrorMessages = on
 
;Do not use Single-Step Mode
TraceMode = off
 
;No winst-window in foreground while batchmode
StayOnTop = false
 
[Actions]
;Variable for the OS
DefVar $OS$
Set $OS$ = GetOS
 
;Variable for the OS-subversion
DefVar $NTVersion$
Set $NTVersion$ = GetNTVersion
 
;Name of product (max. 12 columns)
DefVar $ProductName$
Set $ProductName$ = "yEd"
 
;filename of productpicture with extension
DefVar $ProductPicture$
Set $ProductPicture$ = "yEd.png"
 
;the variable for the ExitCode
DefVar $ExitCode$
 
;show $ProductPicture$ and $ProductName$
ShowBitmap /3 "%scriptpath%\" + $ProductPicture$ $ProductName$
 
sub "%ScriptPath%\delsub32.ins"

delsub32.ins

Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists("%ProgramFiles32Dir%\yWorks\yEd\uninstall.exe")
	comment "Uninstall program found, starting uninstall"
	Winbatch_uninstall_32
	sub_check_exitcode
else
	if FileExists("%ProgramFiles64Dir%\yWorks\yEd\uninstall.exe")
	comment "Uninstall program found, starting uninstall"
	Winbatch_uninstall_64
	sub_check_exitcode
	endif
endif
 
[Winbatch_uninstall_32]
%scriptpath%\AutoIt3.exe %scriptpath%\yEd_uninstall32.au3
 
[Winbatch_uninstall_64]
%scriptpath%\AutoIt3.exe %scriptpath%\yEd_uninstall64.au3
 
[Sub_check_exitcode]
Sub "%ScriptDrive%\check_exitcode\check_exitcode.ins"

yed32.au3

;Starte yEd Installation
Run ("yEd-3.11_without-JRE_32-bit_setup.exe")
WinWaitActive("Setup - yEd Graph Editor 3.11","")
Sleep(1000)
;Klicke Button Next
Send("{SPACE}")
Sleep(500)
Send("{TAB}{TAB}{SPACE}{TAB}{TAB}{TAB}{SPACE}")
Sleep(500)
Send("{TAB}{TAB}{TAB}{SPACE}")
Sleep(500)
Send("{TAB}{TAB}{TAB}{TAB}{SPACE}")
Sleep(500)
Send("{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{SPACE}")
Sleep(500)
Send("{TAB}{TAB}{TAB}{TAB}{SPACE}")
;Warten bis Installation fertig ist
Sleep(20000)
Send("{TAB}{SPACE}")
Exit

yed64.au3

;Starte yEd Installation
Run ("yEd-3.11_without-JRE_64-bit_setup.exe")
WinWaitActive("Setup - yEd Graph Editor 3.11","")
Sleep(1000)
;Klicke Button Next
Send("{SPACE}")
Sleep(500)
Send("{TAB}{TAB}{SPACE}{TAB}{TAB}{TAB}{SPACE}")
Sleep(500)
Send("{TAB}{TAB}{TAB}{SPACE}")
Sleep(500)
Send("{TAB}{TAB}{TAB}{TAB}{SPACE}")
Sleep(500)
Send("{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{TAB}{SPACE}")
Sleep(500)
Send("{TAB}{TAB}{TAB}{TAB}{SPACE}")
;Warten bis Installation fertig ist
Sleep(20000)
Send("{TAB}{SPACE}")
Exit

yeduninstall32.au3

;Starte yEd Deinstallation
Run ("C:\Program Files (x86)\yWorks\yEd\uninstall.exe")
WinWaitActive("yEd Graph Editor 3.11 Uninstall","")
Sleep(1000)
;Klicke Button Next
Send("{SPACE}")
;Warten bis Deinstallation fertig ist
Sleep(10000)
Send("{TAB}{SPACE}")
Sleep(10000)
Exit

yeduninstall64.au3

;Starte yEd Deinstallation
Run ("C:\Program Files\yWorks\yEd\uninstall.exe")
WinWaitActive("yEd Graph Editor 3.11 Uninstall","")
Sleep(1000)
;Klicke Button Next
Send("{SPACE}")
;Warten bis Deinstallation fertig ist
Sleep(10000)
Send("{TAB}{SPACE}")
Sleep(10000)
Exit

Table of Contents