This is an old revision of the document!
====== AVG Antivirus ====== (FREE) http://free.avg.com/de-de/startseite
Tested with opsi 4.0.1
requiredWinstVersion >= “4.10.8.6”
For 32 and 64 Bit
questions to: Thomas_H 2011/10/27 10:30
This is the installation-script for AVG-Antivirus (Free), but it should also function with the payed version. If you have any experiences with the payed version combined with these scripts please let us know by the discussion-page.
[Initial] LogLevel=9 ; Log Errors in Logfile but don't abort: ExitOnError=false ; Show syntax errors in the script: ScriptErrorMessages=on ; Dont trace step by step through the script: TraceMode=off ; let started programs run in front of the winst window StayOnTop=false [Actions] requiredWinstVersion >= "4.10.8.6" DefVar $UninstallProgram32$ DefVar $UninstallProgram64$ DefVar $LogDir$ DefVar $ProductId$ DefVar $MinimumSpace$ DefVar $InstallDir32$ DefVar $InstallDir64$ DefVar $ExitCode$ DefVar $LicenseRequired$ DefVar $LicenseKey$ DefVar $LicensePool$ DefVar $INST_SystemType$ DefVar $INST_architecture$ DefVar $Version$ DefVar $Inst_Cmd$ DefVar $Inst_Prg32$ DefVar $Inst_Prg64$ DefVar $Uninst_Cmd$ DefVar $Uninst_Prg$ Set $INST_SystemType$ = GetSystemType set $INST_architecture$ = GetProductProperty("install_architecture","system specific") Set $LogDir$ = "%SystemDrive%\tmp" ; ---------------------------------------------------------------- ; - Please edit the following values - ; ---------------------------------------------------------------- ;$ProductId$ should be the name of the product in opsi ; therefore please: only lower letters, no umlauts, ; no white space use '-' as a seperator Set $ProductId$ = "avg" ;Kein Punkt in der Versionsnummer! 4.30 ist 430, 4.40 ist 440 oder 4.51 ist 451! Set $Version$ = "2011" Set $MinimumSpace$ = "30 MB" ; the path were we find the product after the installation Set $InstallDir32$ = "%ProgramFiles32Dir%\avg" Set $InstallDir64$ = "%ProgramFiles64Dir%\avg" Set $LicenseRequired$ = "false" Set $LicensePool$ = "p_" + $ProductId$ Set $Inst_Prg32$ = "avg.exe" Set $Inst_Prg64$ = "avg_64.exe" Set $Inst_Cmd$ = '/UILevel=silent /InstallToolbar=0 /ChangeBrowserSearchProvider=0 /InstallSidebar=0 /ParticipateProductImprovement=0 /DontRestart' Set $Uninst_Cmd$ = " /AppMode=SETUP /Maintenance=2 /UILevel=silent" Set $Uninst_Prg$ = "\AVG10\avgmfapx.exe" ; ---------------------------------------------------------------- if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$)) LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$ isFatalError ; Stop process and set installation status to failed else comment "Show product picture" ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$ ; if FileExists("%ScriptPath%\delsub.ins") ; comment "Start uninstall sub section" ; Sub "%ScriptPath%\delsub.ins" ; endif if $LicenseRequired$ = "true" comment "Licensing required, reserve license and get license key" Sub_get_licensekey endif comment "Installiere AVG..." if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") Message "Installiere " + $ProductId$ + ". Das kann 15 Min dauern, bitte Geduld..." comment "Start setup program" Winbatch_install_32 Sub_check_exitcode endif if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) Message "Installiere " + $ProductId$ + ". Das kann 15 Min dauern, bitte Geduld..." comment "Start setup program" Winbatch_install_64 Sub_check_exitcode endif endif [Winbatch_install_32] %ScriptPath%\$Inst_Prg32$ $Inst_Cmd$ [Winbatch_install_64] %ScriptPath%\$Inst_Prg64$ $Inst_Cmd$ [Sub_check_exitcode] comment "Test for installation success via exit code" set $ExitCode$ = getLastExitCode ; informations to exit codes see ; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx ; http://msdn.microsoft.com/en-us/library/aa368542.aspx if ($ExitCode$ = "0") comment "Looks good: setup program gives exitcode zero" else comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ if ($ExitCode$ = "1605") comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." comment "Uninstall of a not installed product failed - no problem" else if ($ExitCode$ = "1641") comment "looks good: setup program gives exitcode 1641" comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." else if ($ExitCode$ = "3010") comment "looks good: setup program gives exitcode 3010" comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." else logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ isFatalError endif endif endif endif
[Initial] LogLevel=9 ; Log Errors in Logfile but don't abort: ExitOnError=false ; Show syntax errors in the script: ScriptErrorMessages=on ; Dont trace step by step through the script: TraceMode=off ; let started programs run in front of the winst window StayOnTop=false [Actions] requiredWinstVersion >= "4.10.8.6" DefVar $UninstallProgram32$ DefVar $UninstallProgram64$ DefVar $LogDir$ DefVar $ExitCode$ DefVar $ProductId$ DefVar $InstallDir32$ DefVar $InstallDir64$ DefVar $LicenseRequired$ DefVar $LicensePool$ DefVar $INST_SystemType$ DefVar $INST_architecture$ DefVar $Uninst_Cmd$ DefVar $Uninst_Prg$ Set $INST_SystemType$ = GetSystemType set $INST_architecture$ = GetProductProperty("install_architecture","system specific") Set $LogDir$ = "%SystemDrive%\tmp" ; ---------------------------------------------------------------- ; - Please edit the following values - ; ---------------------------------------------------------------- Set $ProductId$ = "avg" Set $InstallDir32$ = "%ProgramFiles32Dir%\avg" Set $InstallDir64$ = "%ProgramFiles64Dir%\avg" Set $LicenseRequired$ = "false" Set $LicensePool$ = "p_" + $ProductId$ Set $Uninst_Prg$ = "\AVG10\avgmfapx.exe" Set $Uninst_Cmd$ = " /AppMode=SETUP /Maintenance=2 /UILevel=silent" ; ---------------------------------------------------------------- comment "Show product picture" ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$ Message "Deinstalliere " + $ProductId$ + ". Bitte etwas Geduld..." if FileExists($InstallDir32$+$Uninst_Prg$) Set $Uninst_Prg$ = $InstallDir32$+$Uninst_Prg$M comment "Start uninstall sub section" Sub "%ScriptPath%\delsub.ins" endif if FileExists($InstallDir64$+$Uninst_Prg$) Set $Uninst_Prg$ = $InstallDir64$+$Uninst_Prg$M comment "Start uninstall sub section" Sub "%ScriptPath%\delsub.ins" endif if $LicenseRequired$ = "true" comment "Licensing required, free license used" Sub_free_license endif ExitWindows /Reboot [Sub_free_license] comment "License management is enabled and will be used" comment "Trying to free license used for the product" DefVar $result$ Set $result$ = FreeLicense($LicensePool$) ; If there is an assignment of a license pool to the product, it is possible to use ; Set $result$ = FreeLicense("", $ProductId$) ; ; If there is an assignment of a license pool to a windows software id, it is possible to use ; DefVar $WindowsSoftwareId$ ; $WindowsSoftwareId$ = "..." ; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
; Copyright (c) uib gmbh (www.uib.de) ; This sourcecode is owned by uib gmbh ; and published under the Terms of the General Public License. ; credits: http://www.opsi.org/credits/ ; Wir haben $Uninst_Prg$ bereits mit dem Programmverzeichnis des Betriebssystems verknuepft! Somit ist es bereits "C:\Programme (x86)\blabla\... if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") Message "Uninstalling " + $ProductId$ + " 32 Bit..." if FileExists($Uninst_Prg$) comment "Uninstall program found, starting uninstall" Winbatch_uninstall_32 comment "Removing "+$InstallDir32$ ; Files_uninstall_32 sub_check_exitcode endif Mendif if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) Message "Uninstalling " + $ProductId$ + " 64 Bit..." if FileExists($Uninst_Prg$) comment "Uninstall program found, starting uninstall" ; Die Aufrufe fuer 32 Bit und 64 Bit sind gleich, daher: Winbatch_uninstall_32 comment "Removing "+$InstallDir64$ ; Files_uninstall_64 sub_check_exitcode endif endif [Winbatch_uninstall_32] "$Uninst_Prg$" $Uninst_Cmd$ [Files_uninstall_32] ; Example for recursively deleting the installation directory (don't forget the trailing backslash): ; ;delete -sf "$InstallDir32$\" [Sub_check_exitcode] comment "Test for installation success via exit code" set $ExitCode$ = getLastExitCode ; informations to exit codes see ; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx ; http://msdn.microsoft.com/en-us/library/aa368542.aspx if ($ExitCode$ = "0") comment "Looks good: setup program gives exitcode zero" else comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ if ($ExitCode$ = "1605") comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." comment "Uninstall of a not installed product failed - no problem" else if ($ExitCode$ = "1641") comment "looks good: setup program gives exitcode 1641" comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." else if ($ExitCode$ = "3010") comment "looks good: setup program gives exitcode 3010" comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." else logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ isFatalError endif endif endif endif