Differences

This shows you the differences between two versions of the page.

--- userspace:dellbios [2014/04/09 14:16]
Lai created
+++ userspace:dellbios [2015/09/14 11:50]
tobias [Dell Bios Settings v2]
@@ Line 1: / Line 1: @@
 ====== DellBios ======
 Tested with opsi 4.0.4.5\\
 requiredWinstVersion >= 4.11.3.6\\
-You need the Dell CCTK
+You need the Dell CCTK\\
 Files can be downloaded at http://en.community.dell.com/techcenter/systems-management/w/wiki/1952.dell-client-configuration-toolkit-cctk.aspx
-Tree: \\
+Tree:\\
 <code>
 DATA_CLIENT
@@ Line 26: / Line 25: @@
 </code>
+===== Abstract =====
+\\
+This package can read and set some Dell BIOS Values\\
+\\
+Supported Values:\\
+\\
+Password\\
+wake on LAN\\
+control wlan radio\\
+control wwan radio\\
+num lock\\
+\\
+Simple installation of this package makes an audit of\\
+currently set BIOS Values and reports the state back\\
+into the opsi package properties (it also reports if this\\
+BIOS property is available on the specific computer hardware)\\
+\\
+To set BIOS values the _set_bios property must be true.\\
+\\
+To set the bios password use the password new property\\
+if the password is set correctly this value gets cleared\\
+and the new password is automatically entered into the\\
+password property field.\\
+\\
+if the Value in the password field is wrong (or the BIOS\\
+password is set but not properly configured in the\\
+opsi Package) -–password required–- or -–password wrong–-\\
+will be reported in this field.\\
+\\
+===== Install Information =====
+\\
+Install the Dell CCTK on a development Computer and copy the\\
+%Programfiles%\Dell\CCTK\x86 or %Programfiles%\Dell\CCTK\x64\\
+into the DATA_CLIENT bin folder
 === setup.ins ===
@@ Line 470: / Line 504: @@
   * Initial package
- -- HL <>  Mon, 09 Jan 2012 15:45:19 +0000
+ -- HL <>  Mon, 04 Jan 2014 15:45:19 +0000
 </code>
+====== Dell Bios Settings v2 ======
+Da ich nicht gesehen habe das es so eine Art Script schon im WIKI gibt, habe ich ein eigenes geschrieben. Allerdings mit anderen Optionen.
+Das Script ist in der Lage folgende BIOS Einstellungen vorzunehmen.
+  * Festplatten Kennwort setzen oder Löschen
+  * Systempasswort (BIOS Passwort) zu setzen oder zu löschen
+  * Wake On LAN Einstellungen vornehmen.
+Weitere Einstellungen baue ich auf Wunsch mit aufgenommen (Anfrage per Private Message im Forum an Tobias).
+Verfügbare Einstellungen:
+http://www.dell.com/support/manuals/us/en/04/Topic/dell-cmnd-config-v3.1/DCC_CLI-v4/en-us/GUID-F4D70CEF-44A6-4693-BBE3-D40DAABCCD2B
+Tree:\\
+<code>
+├── CLIENT_DATA
+│   ├── cctkerrorcodes.txt
+│   ├── custom
+│   ├── files
+│   │   ├── x86
+│   │   │   ├── cctk.exe
+│   │   │   ├── cctk_x86_winpe_10.bat
+│   │   │   ├── cctk_x86_WinPE_3.bat
+│   │   │   ├── cctk_x86_winpe_4.bat
+│   │   │   ├── cctk_x86_winpe_5.bat
+│   │   │   ├── cctk_x86_WinPE.bat
+│   │   │   ├── HAPI
+│   │   │   │   ├── dcdbas32.cat
+│   │   │   │   ├── dcdbas32.inf
+│   │   │   │   ├── dcdbas32.sys
+│   │   │   │   ├── dcdesm32.sys
+│   │   │   │   ├── dcdipm32.sys
+│   │   │   │   ├── dcdtvm32.sys
+│   │   │   │   ├── dcesm.sys
+│   │   │   │   ├── dcesmwdm.sys
+│   │   │   │   ├── dchapi32.dll
+│   │   │   │   ├── dchbas32.dll
+│   │   │   │   ├── dchcfg32.exe
+│   │   │   │   ├── dchcfl32.dll
+│   │   │   │   ├── dchesm32.dll
+│   │   │   │   ├── dchipm32.dll
+│   │   │   │   ├── dchtst32.exe
+│   │   │   │   ├── dchtvm32.dll
+│   │   │   │   ├── dciwds32.exe
+│   │   │   │   ├── dcmdev32.exe
+│   │   │   │   ├── dcwipm32.dll
+│   │   │   │   ├── HAPIInstall.bat
+│   │   │   │   ├── hapint.exe
+│   │   │   │   ├── HAPIUninstall.bat
+│   │   │   │   └── omsacntl.exe
+│   │   │   ├── mxml1.dll
+│   │   │   └── pci.ids
+│   │   └── X86_64
+│   │       ├── cctk.exe
+│   │       ├── cctk_x86_64_winpe_10.bat
+│   │       ├── cctk_x86_64_WinPE_3.bat
+│   │       ├── cctk_x86_64_winpe_4.bat
+│   │       ├── cctk_x86_64_winpe_5.bat
+│   │       ├── cctk_x86_64_winpe.bat
+│   │       ├── HAPI
+│   │       │   ├── dcdbas32.cat
+│   │       │   ├── dcdbas32.inf
+│   │       │   ├── dcdbas32.sys
+│   │       │   ├── dcdbas64.cat
+│   │       │   ├── dcdbas64.inf
+│   │       │   ├── dcdbas64.sys
+│   │       │   ├── dcdipm64.sys
+│   │       │   ├── dchapi32.dll
+│   │       │   ├── dchapi64.dll
+│   │       │   ├── dchbas32.dll
+│   │       │   ├── dchbas64.dll
+│   │       │   ├── dchcfg32.exe
+│   │       │   ├── dchcfg64.exe
+│   │       │   ├── dchcfl32.dll
+│   │       │   ├── dchcfl64.dll
+│   │       │   ├── dchesm32.dll
+│   │       │   ├── dchipm32.dll
+│   │       │   ├── dchipm64.dll
+│   │       │   ├── dchtst32.exe
+│   │       │   ├── dchtst64.exe
+│   │       │   ├── dchtvm32.dll
+│   │       │   ├── dciwds32.exe
+│   │       │   ├── dcmdev32.exe
+│   │       │   ├── dcmdev64.exe
+│   │       │   ├── dcwipm32.dll
+│   │       │   ├── HAPIInstall.bat
+│   │       │   ├── hapint64.exe
+│   │       │   ├── hapint.exe
+│   │       │   ├── HAPIUninstall.bat
+│   │       │   └── omsacntl.exe
+│   │       ├── mxml1.dll
+│   │       └── pci.ids
+│   ├── setup3264.opsiscript
+</code>
+=====  Script: Setup3264.opsiscript =====
+<code>
+[ACTIONS]
+SetLogLevel = 6
+DefVar $INST_SystemType$
+DefVar $INST_architecture$
+DefVar $ExitCode$
+DefStringList $ErrorCodesList$
+set $ErrorCodesList$ = loadTextFile ('%scriptpath%\cctkerrorcodes.txt')
+DefStringList $ErrorCodeString$
+DefVar $ErrorCode$
+DefVar $ErrorCodeDescription$
+Set $INST_SystemType$ = GetSystemType
+DefVar $RebootWanted$
+Set $RebootWanted$ = GetProductProperty("10_RebootWanted", "false")
+DefVar $SetHDDPassword$
+Set $SetHDDPassword$ = GetProductProperty("1_Set_HDDPassword", "false")
+Defvar $HDDPWDOptions$
+DefVar $HDDPassword$
+Set $HDDPassword$ = GetProductProperty("1_HDD_Password", "XXXX")
+DefVar $currentHDDPassword$
+Set $currentHDDPassword$ = GetProductProperty("1_current_HDD_Password", "XXXX")
+DefVar $SetBIOSPassword$
+Set $SetBIOSPassword$ = GetProductProperty("2_Set_BIOSPassword", "true")
+DefVar $BIOSPWDOptions$
+DefVar $BIOSPassword$
+Set $BIOSPassword$ =  GetProductProperty("2_BIOS_Password", "XXXX")
+DefVar $CurrentBIOSPassword$
+Set $CurrentBIOSPassword$ =  GetProductProperty("2_current_BIOS_Password", "XXXX")
+DefVar $SetWOL$
+Set $SetWOL$ =   GetProductProperty("3_Set_WOL", "true")
+DefVar $WOL$
+Set $WOL$ = GetProductProperty("3_WOL", "enable")
+DefVar $Change_HDDPassword$
+; ----------------------------------------------------------------
+; - 64Bit                             -
+; ----------------------------------------------------------------
+if $INST_SystemType$ = "64 Bit System"
+  if $SetHDDPassword$ = "True"
+    if  NOT ($CurrentHDDPassword$ = " ")
+      set $HDDPWDOptions$ = "--hddpwd=$HDDPassword$ --valhddpwd=$CurrentHDDPassword$"
+    else
+      set $HDDPWDOptions$  = "--hddpwd=$HDDPassword$"
+    endif
+      Winbatch_BIOS_Config_HDDPWD_x64
+      set $exitcode$ = getLastExitcode
+      for %s% in $ErrorCodesList$ do Sub_Check_Exitcode
+      opsiServiceCall_report_new_HDD_password
+  endif
+  if $SetBIOSPassword$ = "True"
+    if  NOT ($CurrentHDDPassword$ = " ")
+    set $BIOSPWDOptions$ = "--setuppwd=$BIOSPassword$ --valsetuppwd=$CurrentBIOSPassword$"
+    else
+      set $BIOSPWDOptions$  = "--setuppwd=$BIOSPassword$"
+    endif
+    Winbatch_BIOS_Config_BIOSPWD_x64
+    set $exitcode$ = getLastExitcode
+    for %s% in $ErrorCodesList$ do Sub_Check_Exitcode
+    opsiServiceCall_report_new_BIOS_password
+  endif
+  if $SetWOL$ = "True"
+    Winbatch_BIOS_Config_WOL_x64
+    set $exitcode$ = getLastExitcode
+    for %s% in $ErrorCodesList$ do Sub_Check_Exitcode
+  endif
+endif
+; ----------------------------------------------------------------
+; - 32Bit                           -
+; ----------------------------------------------------------------
+if $INST_SystemType$ = "x86 System"
+  if $SetHDDPassword$ = "True"
+      Winbatch_BIOS_Config_HDDPWD_x64
+      set $exitcode$ = getLastExitcode
+      for %s% in $ErrorCodesList$ do Sub_Check_Exitcode
+      opsiServiceCall_report_new_HDD_password
+  endif
+  if $SetBIOSPassword$ = "True"
+    Winbatch_BIOS_Config_BIOSPWD_x64
+    set $exitcode$ = getLastExitcode
+    for %s% in $ErrorCodesList$ do Sub_Check_Exitcode
+    opsiServiceCall_report_new_BIOS_password
+  endif
+  if $SetWOL$ = "True"
+    Winbatch_BIOS_Config_WOL_x64
+    set $exitcode$ = getLastExitcode
+    for %s% in $ErrorCodesList$ do Sub_Check_Exitcode
+  endif
+endif
+if $RebootWanted$ = "True"
+  ExitWindows /Reboot
+endif
+[Winbatch_BIOS_Config_HDDPWD_x64]
+%scriptpath%\files\x86_64\cctk.exe $HDDPWDOptions$
+[Winbatch_BIOS_Config_BIOSPWD_x64]
+%scriptpath%\files\x86_64\cctk.exe $BIOSPWDOptions$
+[Winbatch_BIOS_Config_WOL_x64]
+%scriptpath%\files\x86_64\cctk.exe --wakeonlan=$WOL$ --valsetuppwd=$CurrentBIOSPassword$
+[opsiServiceCall_report_new_BIOS_password]
+"method": "setProductProperty"
+"params": [
+"dfn_dellbiosconfig",
+"2_current_BIOS_Password",
+"$BIOSPassword$",
+"%hostid%"
+]
+[opsiServiceCall_report_new_HDD_password]
+"method": "setProductProperty"
+"params": [
+"dfn_dellbiosconfig",
+"1_current_HDD_Password",
+"$HDDPassword$",
+"%hostid%"
+]
+[Sub_Check_Exitcode]
+SetLogLevel = 5
+if takeString(0, splitString ("%s%",  ".")) = $ExitCode$
+  if not ($ExitCode$ = "0")
+    LogError takeString(1, splitString ("%s%",  ".")) +" (ExitCode " +$ExitCode$+" )"
+    isFatalError $ExitCode$
+  else
+    message "BIOS Command was Successful"
+  EndIf
+endif
+</code>

OPSI DokuWiki

User Tools

Site Tools

Differences

Page Tools