OPSI DokuWiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== FreeCAD 0.12 ======

**Versions**\\
By  //[[matteo.cristofaro(at)wupsi.de|Matteo Cristofaro]] 2012/08/17 19:00// \\


Tested with opsi xxxxx\\
requiredWinstVersion >= 4.10.8.6
By  //[[matteo.cristofaro(at)wupsi.de|Matteo Cristofaro]] 2012/08/17 19:00// \\


Das Setup-File wird im ScriptPath in einem Unterverzeichnis "setup" abgelegt, also "CLIENT_DATA\setup\FreeCAD_0.12.5284_x86_setup.msi"

Tree:\\
delsub32.ins\\
freecad_0125284_x32.PNG\\
setup\FreeCAD_0.12.5284_x86_setup.msi\\
setup32.ins\\
uninstall32.ins

==== setup32.ins ====
<code winst>
[Actions]
requiredWinstVersion >= "4.10.8.6"

DefVar $MsiId$
DefVar $LogDir$
DefVar $ProductId$  
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $SetupFile$
DefVar $ExitCode$

Set $LogDir$ 		= "%SystemDrive%\tmp"
Set $ProductId$       	= "freecad_0125284_x32"
Set $MinimumSpace$    	= "350 MB"
Set $SetupFile$		= "FreeCAD_0.12.5284_x86_setup.msi"
Set $InstallDir$      	= "%ProgramFiles32Dir%\FreeCAD0.12"
; ----------------------------------------------------------------

if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
else
	comment "Show product picture"
	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
	
	if FileExists("%ScriptPath%\delsub32.ins")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub32.ins"
	endif
	
	Message "Installing " + $ProductId$ + " ..."
	
	comment "Copy files"
	Files_copy /32Bit
	
	comment "Start setup program"
	Winbatch_install
	Sub_check_exitcode	
endif

SleepSeconds 15


[Files_copy]
copy -s "%ScriptPath%\setup\$SetupFile$" "$InstallDir$\setup"


[Winbatch_install]
msiexec /i "$InstallDir$\setup\$SetupFile$" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress


[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif
</code>

==== delsub32.ins ====
<code winst>
Set $MsiId$ = '{81ABC4A0-DE63-11DE-8A39-0800200C9A66}'

Message "Uninstalling " + $ProductId$ + " ..."

if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "")
	comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall"
	Winbatch_uninstall_msi
	sub_check_exitcode
endif

comment "Delete files"
Files_delete /32Bit

SleepSeconds 15


[Winbatch_uninstall_msi]
msiexec /x $MsiId$ /qb! REBOOT=ReallySuppress

[Files_delete]
delete -sf "$InstallDir$\"

[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif
</code>

==== uninstall32.ins ====
<code winst>
[Actions]
requiredWinstVersion >= "4.10.8.6"

DefVar $MsiId$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir$
DefVar $SetupFile$

Set $LogDir$ 		= "%SystemDrive%\tmp"
Set $ProductId$       	= "freecad_0125284_x32"
Set $InstallDir$      	= "%ProgramFiles32Dir%\FreeCAD0.12"
; ----------------------------------------------------------------

comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$

Message "Uninstalling " + $ProductId$ + " ..."

if FileExists("%ScriptPath%\delsub32.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub32.ins"
endif
</code>
OPSI DokuWiki

User Tools

Site Tools

Page Tools
