User Tools

Site Tools


userspace:freestudio_5.7.0

Freestudio 5.7.1

2012-12-12
Script by uib gmbh
Comments and improvements welcome
Tested with opsi 4.0.2

type: localboot
id: freestudio
name: FreeStudio Version
description: All-in-one Paket der kostenlosen Multimedia-Anwendungen von DVDVideoSoft
version: 5.7.1.822

Requires dotnetfx, so make a dependency.

Full package: http://download.uib.de/opsi4.0/products/contribute/full-package/

setup32.ins

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
 
[Actions]
requiredWinstVersion >= "4.11.2.6"
 
DefVar $MsiId$
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ProductId$  
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $ExitCode$
DefVar $commonFiles$
DefVar $RebootFlag$
DefVar $WinstRegKey$
DefVar $searchscope$
DefVar $removeConduit$
DefVar $user$
DefVar $SearchProc$
DefVar $ProcStarted$
DefVar $ProcEnded$
DefVar $TimeOut$
DefStringlist $TimeOutList$
 
Set $LogDir$ = "%SystemDrive%\opsi.org\tmp"
 
comment "handle Rebootflag"
Set $WinstRegKey$ = "HKLM\SOFTWARE\opsi.org\winst"
Set $RebootFlag$ = GetRegistryStringValue("["+$WinstRegKey$+"] "+"RebootFlag")
 
 
Set $ProductId$       = "freestudio"
Set $MinimumSpace$    = "5 MB"
; the path were we find the product after the installation
Set $InstallDir$      = "%ProgramFiles32Dir%\DVDVideoSoft\Free Studio\"
; ----------------------------------------------------------------
 
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
else
	comment "Show product picture"
	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
	comment "backup the actual ie default search scope"
	set $searchscope$ = getregistrystringvalue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\SearchScopes]")
	comment "check if conduit is installed"
	if FileExists("%ProgramFiles32Dir%\Conduit")
		set $removeConduit$ = "false"
	else
		comment "conduit do not exist before Installation - so we will remove it  later"
		set $removeConduit$ = "true"
	endif
 
	if FileExists("%ScriptPath%\delsub32.ins")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub32.ins"
	endif
 
	Message "Installing " + $ProductId$ + " ..."
 
	if getmsversioninfo < "6.0"
		if "" = getregistrystringvalue32("[hklm\software\microsoft\windows\currentversion\uninstall\KB932716-v2] DisplayName")
			comment "needed (KB932716-v2) is not existing"
			if ($RebootFlag$ = "KB932716-v2-installed")
				set $RebootFlag$ = ""
				Registry_SaveRebootFlag
				LogError "Error: we installed KB932716-v2 before but it is not existing after reboot"
				isFatalError
			else
				comment "install Image Mastering API v2.0 (IMAPIv2.0) für Windows XP (KB932716)"
				winbatch_install_imapi
				Sub_check_exitcode
				set $RebootFlag$ = "KB932716-v2-installed"
				Registry_SaveRebootFlag
				ExitWindows /ImmediateReboot
			endif
		else
			comment "seems to be installed: Image Mastering API v2.0 (IMAPIv2.0) für Windows XP (KB932716)"
			set $RebootFlag$ = ""
			Registry_SaveRebootFlag
		endif
	endif
 
	comment "Start setup program"
	;if getmsversioninfo >= "6.0"
		killtask "iexplore.exe"
		killtask "firefox.exe"
	;endif
	Files_copy_setup_2_temp
	ChangeDirectory $LogDir$
	if getmsversioninfo >= "6.0"
		Winbatch_install /WaitForProcessEnding "DVSUpdate.exe" /TimeOutSeconds 300
	else
		Winbatch_install
		if getLastExitcode = "1"
			sleepseconds 2
			Winbatch_install
			if getLastExitcode = "1"
				sleepseconds 2
				Winbatch_install
				if getLastExitcode = "1"
					sleepseconds 2
					Winbatch_install
					if getLastExitcode = "1"
						ExitWindows /ImmediateReboot
					endif
				endif
			endif
		endif
		set $SearchProc$ = "DVSUpdate.exe"
		sub_wait_until_proc_finished
	endif
	if getmsversioninfo >= "6.0"
		killtask "iexplore.exe"
		killtask "firefox.exe"
	endif
	Sub_check_exitcode
	Files_del_setup_temp
 
	comment "Deinstall Toolbar"
	if not (FileExists("%ProgramFiles32Dir%\DVDVideoSoftTB_DE\uninstall.exe"))
		comment "wait for Toolbar install dir"
		sleepseconds 10
	endif
	if FileExists("%ProgramFiles32Dir%\DVDVideoSoftTB_DE\uninstall.exe")
		Execwith_autoit_install "%ScriptPath%\autoit3.exe" winst /LetThemGo
		Winbatch_deinstall_toolbar
		Sub_check_exitcode
		sleepseconds 1
		killtask "autoit3.exe"
		Sub_check_exitcode
		includelog $LogDir$+"\au3.log" "50"
	else
		comment "Toolbar install dir not found"
	endif
	if getmsversioninfo >= "6.0"
		killtask "iexplore.exe"
		killtask "firefox.exe"
	endif
 
	comment "delete tb installer files"
	set $commonFiles$ = GetRegistryStringValue32("[hklm\software\microsoft\windows\currentversion] CommonFilesDir" )
	Files_del_toolbar /32Bit
 
	comment "Remove search entry from Registry"
	Registry_remove_iesearch /32Bit
 
	if $removeConduit$ = "true"
		Files_del_conduit
		Registry_del_conduit
	endif
	Exitwindows /reboot
endif
 
[winbatch_install_imapi]
"%ScriptPath%\WindowsXP-KB932716-v2-x86-DEU.exe" /quiet /passive /norestart
 
[Files_copy_setup_2_temp]
copy "%ScriptPath%\FreeStudio.exe" "$LogDir$"
 
[Files_del_setup_temp]
del "$LogDir$\FreeStudio.exe"
 
[Winbatch_install]
; === Inno Setup ========================================================================================
"$LogDir$\FreeStudio.exe" /sp- /silent /norestart /nocancel /SUPPRESSMSGBOXES
 
[Winbatch_deinstall_toolbar]
; no known silent switch
"%ProgramFiles32Dir%\DVDVideoSoftTB_DE\uninstall.exe"
 
[Files_del_toolbar]
del "$commonFiles$\DVDVideoSoft\bin\SubscriptionOffer.exe"
del -f -s "$commonFiles$\DVDVideoSoft\TB\"
del -f -s "%ProgramFiles32Dir%\DVDVideoSoftTB_DE\"
 
[Files_del_conduit]
del -f -s "$commonFiles$\conduit\"
 
[Registry_del_conduit]
deletekey [HKEY_LOCAL_MACHINE\SOFTWARE\Conduit]
 
[Registry_remove_iesearch]
deletekey [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\SearchScopes\{afdbddaa-5d3f-42ee-b79c-185a7020515b}]
openkey [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Internet Explorer\SearchScopes]
set "" = "$searchscope$"
 
[Execwith_autoit_install]
#RequireAdmin
;Blockinput(1)
;run("%ProgramFiles32Dir%\DVDVideoSoftTB_DE\uninstall.exe")
; exact title match
Opt("WinTitleMatchMode", 3)
$mylog = FileOpen("$LogDir$\au3.log", 2)
FileWriteLine($mylog,"auto-it started - waiting for the window")
; do not use winwait(), it will fail on other desktops than current
$seconds = 0
$exists = 0
While ($seconds <= 300) and ($exists = 0)
	$exists = WinExists("Toolbar Uninstall","Are you sure")
	FileWriteLine($mylog,"winexists result (1=exists): " & $exists )
	$seconds = $seconds + 1
sleep(1000)
WEnd
FileWriteLine($mylog,"window detected - sending answer")
; next
$result = ControlClick("Toolbar Uninstall","Are you sure", 1)
FileWriteLine($mylog,"answer sended: result (1=success) : " & $result)
Blockinput(0)
FileClose($mylog)
;Sleep(500)
;and good bye
Exit @error
 
[Registry_SaveRebootFlag]
openKey [$WinstRegKey$]
set "RebootFlag" = "$RebootFlag$"
 
[sub_wait_until_proc_finished]
set $ProcStarted$="0"
set $ProcEnded$="0"
set $TimeOut$="0"
set $TimeOutList$= createStringList("0","1","2","3","4","5","6","7","8","end")
for %t% in $TimeOutList$ do sub_proclook_and_wait
 
[sub_proclook_and_wait]
if ("%t%"="end")
	set $TimeOut$="1"
	comment "Timeout reached"
endif
if ($TimeOut$="0") and ($ProcEnded$="0")
	if not ("" = takefirststringcontaining(getProcessList,$SearchProc$))
		comment $SearchProc$+ " is running"
		if $ProcStarted$="0"
			set $ProcStarted$="1"
			set $ProcEnded$="0"
			comment $SearchProc$+ " has started"
			sleepseconds 20
		else
			comment "waiting for ending of "+$SearchProc$
			sleepseconds 20
		endif
	else
		comment $SearchProc$+ " is not running"
		if $ProcStarted$="1"
			set $ProcEnded$="1"
			comment $SearchProc$+ " has ended"
		else
			comment "waiting for start of "+$SearchProc$
			sleepseconds 20
		endif
	endif
endif
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
			Exitwindows /Reboot
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
				Exitwindows /Reboot
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

uninstall32.ins

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
 
[Actions]
requiredWinstVersion >= "4.11.2.6"
 
DefVar $MsiId$
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir$
DefVar $LicenseRequired$
DefVar $LicensePool$
 
Set $LogDir$ = "%SystemDrive%\opsi.org\tmp"
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "freestudio"
Set $InstallDir$      = "%ProgramFiles32Dir%\\DVDVideoSoft\Free Studio\"
; ----------------------------------------------------------------
 
 
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists("%ScriptPath%\delsub32.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub32.ins"
endif

delsub32.ins

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/en/credits/
 
 
Set $UninstallProgram$ = $InstallDir$ + "unins000.exe"
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists($UninstallProgram$)
	comment "Uninstall program found, starting uninstall"
	;Winbatch_uninstall /WaitForProcessEnding "DVSVideoToolbarHelper.exe" /TimeOutSeconds 40
	Winbatch_uninstall
	sub_check_exitcode
	comment "Delete files"
	Files_uninstall /32Bit
	if getmsversioninfo < "6.0"
		ExitWindows /ImmediateReboot
	endif
endif
 
sleepseconds 2
if getmsversioninfo >= "6.0"
	killtask "iexplore.exe"
	killtask "firefox.exe"
endif
 
[Winbatch_uninstall]
; === Inno Setup ========================================================================================
"$UninstallProgram$" /silent /norestart /SUPPRESSMSGBOXES /nocancel
 
[Files_uninstall]
del -sf "$InstallDir$\"
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
			Exitwindows /Reboot
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
				Exitwindows /Reboot
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif
userspace/freestudio_5.7.0.txt · Last modified: 2021/08/23 08:37 (external edit)