Differences

This shows you the differences between two versions of the page.

--- userspace:microsoft_office_pro_2010_32_bit [2011/10/27 13:54]
Thomas_H created
+++ userspace:microsoft_office_pro_2010_32_bit [2021/08/23 08:37]
@@ Line 1: / Line 1: @@
-====== Microsoft Office 2010 / Pro (32 Bit ) ======
-Tested with opsi 4.0.1 \\
-requiredWinstVersion >= 4.10.8.6\\
-For 32 Bit\\
-By  //[[hungerharke@gmx.de|Thomas_H]] 2011/10/27 12:58//
-Steps:
-  - copy all files of Setup-CD to CLIENT_DATA
-  - Copy the "config.xml" to CLIENT_DATA/ProPlus.WW
-To avoid collisions between 32 and 64 Bit-Office you better have separate opsi-packages for each version.
-==== setup.ins ====
-<code winst>
-[Initial]
-LogLevel=9
-;  Log Errors in Logfile but don't abort:
-ExitOnError=false
-; Show syntax errors in the script:
-ScriptErrorMessages=on
-; Dont trace step by step through the script:
-TraceMode=off
-; let started programs run in front of the winst window
-StayOnTop=false
-[Actions]
-requiredWinstVersion >= "4.10.8.6"
-DefVar $MsiId32$
-DefVar $UninstallProgram32$
-DefVar $MsiId64$
-DefVar $UninstallProgram64$
-DefVar $LogDir$
-DefVar $ProductId$
-DefVar $MinimumSpace$
-DefVar $InstallDir32$
-DefVar $InstallDir64$
-DefVar $ExitCode$
-DefVar $LicenseRequired$
-DefVar $LicenseKey$
-DefVar $LicensePool$
-DefVar $INST_SystemType$
-DefVar $INST_architecture$
-DefVar $Version$
-DefVar $Inst_Cmd32$
-DefVar $Inst_Cmd64$
-DefVar $Inst_Prg$
-DefVar $Uninst_Cmd$
-DefVar $Uninst_Prg$
-Set $INST_SystemType$ = GetSystemType
-set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
-Set $LogDir$ = "%SystemDrive%\tmp"
-; ----------------------------------------------------------------
-; - Please edit the following values                             -
-; ----------------------------------------------------------------
-;$ProductId$ should be the name of the product in opsi
-; therefore please: only lower letters, no umlauts,
-; no white space use '-' as a seperator
-Set $ProductId$       = "Microsoft-Office (32 Bit)"
-Set $Version$         = "2011"
-Set $MinimumSpace$    = "30 MB"
-; the path were we find the product after the installation
-Set $InstallDir32$      = "%ProgramFiles32Dir%\Microsoft Office"
-Set $InstallDir64$      = "%ProgramFiles64Dir%\Microsoft Office"
-Set $LicenseRequired$ = "false"
-Set $LicensePool$     = "p_" + $ProductId$
-Set $Inst_Prg$ = "setup.exe"
-Set $Inst_Cmd32$ = '/config'
-Set $Uninst_Cmd$ = ""
-Set $Uninst_Prg$ = ""
-; ----------------------------------------------------------------
-comment "Show product picture"
-ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$
-if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
-        LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
-        isFatalError
-        ; Stop process and set installation status to failed
-else
-;       if FileExists("%ScriptPath%\delsub.ins")
-;               comment "Start uninstall sub section"
-;               Sub "%ScriptPath%\delsub.ins"
-;       endif
-        if $LicenseRequired$ = "true"
-                comment "Licensing required, reserve license and get license key"
-                Sub_get_licensekey
-        endif
-        comment "Installiere Microsoft Office 2010 (32 Bit)..."
-        if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
-                Message "Installiere " + $ProductId$ + ". Das kann etwas laenger dauern, bitte Geduld..."
-                comment "Start setup program"
-                Winbatch_install_32
-                Files_delete_32
-                Sub_check_exitcode
-        endif
-        if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
-                Message "Dieses Produkt ist nur fuer 32 Bit OS! Waehlen Sie die 64 Bit-Version!"
-                comment "Fatal: for 32 Bit OS only!"
-                isFatalError
-                Sub_check_exitcode
-        endif
-endif
-[Winbatch_install_32]
-; Choose one of the following examples as basis for your installation
-; You can use $LicenseKey$ var to pass a license key to the installer
-;
-; === Nullsoft Scriptable Install System ================================================================
-%ScriptPath%\$Inst_Prg$ $Inst_Cmd32$ "%Scriptpath%\ProPlus.WW\config.xml"
-[Files_delete_32]
-; Example of recursively copying some files into the installation directory:
-;
-delete /s "$InstallDir32$\*.*"
-</code>
-==== uninstall.ins ====
-<code winst>
-[Initial]
-LogLevel=9
-;  Log Errors in Logfile but don't abort:
-ExitOnError=false
-; Show syntax errors in the script:
-ScriptErrorMessages=on
-; Dont trace step by step through the script:
-TraceMode=off
-; let started programs run in front of the winst window
-StayOnTop=false
-[Actions]
-requiredWinstVersion >= "4.10.8.6"
-DefVar $MsiId32$
-DefVar $UninstallProgram32$
-DefVar $MsiId64$
-DefVar $UninstallProgram64$
-DefVar $LogDir$
-DefVar $ExitCode$
-DefVar $ProductId$
-DefVar $InstallDir32$
-DefVar $InstallDir64$
-DefVar $LicenseRequired$
-DefVar $LicensePool$
-DefVar $INST_SystemType$
-DefVar $INST_architecture$
-DefVar $Uninst_Cmd$
-DefVar $Uninst_Prg$
-Set $INST_SystemType$ = GetSystemType
-set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
-Set $LogDir$ = "%SystemDrive%\tmp"
-; ----------------------------------------------------------------
-; - Please edit the following values                             -
-; ----------------------------------------------------------------
-Set $ProductId$       = "Microsoft Office (32 Bit)"
-Set $InstallDir32$    = "%ProgramFiles32Dir%\Microsoft Office"
-Set $InstallDir64$    = "%ProgramFiles64Dir%\Microsoft Office"
-Set $LicenseRequired$ = "false"
-Set $LicensePool$     = "p_" + $ProductId$
-Set $Uninst_Prg$        = "setup.exe"
-Set $Uninst_Cmd$        = " /uninstall ProPlus /config "
-; ----------------------------------------------------------------
-comment "Show product picture"
-ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$
-Message "Deinstalliere " + $ProductId$ + ". Bitte etwas Geduld..."
-if FileExists($InstallDir32$+"\"+$Uninst_Prg$)
-    Set $Uninst_Prg$ = $InstallDir32$+"\"+$Uninst_Prg$
-    comment "Start uninstall sub section"
-    Sub "%ScriptPath%\delsub.ins"
-endif
-if FileExists("%ScriptPath%\"+$Uninst_Prg$)
-    Set $Uninst_Prg$ = "%ScriptPath%\"+$Uninst_Prg$
-    comment "Start uninstall sub section"
-    Sub "%ScriptPath%\delsub.ins"
-endif
-if $LicenseRequired$ = "true"
-        comment "Licensing required, free license used"
-        Sub_free_license
-endif
-ExitWindows /reboot
-[Sub_free_license]
-comment "License management is enabled and will be used"
-comment "Trying to free license used for the product"
-DefVar $result$
-Set $result$ = FreeLicense($LicensePool$)
-; If there is an assignment of a license pool to the product, it is possible to use
-; Set $result$ = FreeLicense("", $ProductId$)
-;
-; If there is an assignment of a license pool to a windows software id, it is possible to use
-; DefVar $WindowsSoftwareId$
-; $WindowsSoftwareId$ = "..."
-; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
-</code>
-==== delsub.ins ====
-<code winst>
-if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
-        Message "Uninstalling " + $ProductId$ + " 32 Bit..."
-        if FileExists($Uninst_Prg$)
-                comment "Uninstall program found, starting uninstall"
-                Winbatch_uninstall_32
-                comment "Removing "+$InstallDir32$
-;               Files_uninstall_32
-                sub_check_exitcode
-        endif
-Mendif
-if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
-        Message $ProductId$ + " ist nur fuer 32 Bit..."
-        comment "Fatal: Nur fuer 32 Bit OS!"
-        isFatalError
-endif
-[Winbatch_uninstall_32]
-; Choose one of the following examples as basis for program uninstall
-;
-; === Nullsoft Scriptable Install System ================================================================
-; "$UninstallProgram32$" /S
-;
-; === Inno Setup ========================================================================================
-; "$UninstallProgram32$" /silent /norestart
-"$Uninst_Prg$" $Uninst_Cmd$ "%ScriptPath%\ProPlus.WW\SilentUninstallConfig.xml"
-[Files_uninstall_32]
-; Example for recursively deleting the installation directory (don't forget the trailing backslash):
-;
-delete -sf "$InstallDir32$\"
-[Sub_check_exitcode]
-comment "Test for installation success via exit code"
-set $ExitCode$ = getLastExitCode
-; informations to exit codes see
-; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
-; http://msdn.microsoft.com/en-us/library/aa368542.aspx
-if ($ExitCode$ = "0")
-        comment "Looks good: setup program gives exitcode zero"
-else
-        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
-        if ($ExitCode$ = "1605")
-                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
-                comment "Uninstall of a not installed product failed - no problem"
-        else
-                if ($ExitCode$ = "1641")
-                        comment "looks good: setup program gives exitcode 1641"
-                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
-                else
-                        if ($ExitCode$ = "3010")
-                                comment "looks good: setup program gives exitcode 3010"
-                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
-                        else
-                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
-                                isFatalError
-                        endif
-                endif
-        endif
-endif
-</code>
-==== config.xml ====
-<code>
-You'll have to change some informations in the config.xml. This config.xml will install Word, Excel, Powerpoint and Outlook as local installed applications. MS-Access will installed if needed, also all other components, which are dispensable (in my humble opinion). This config.xml is for the unpatient boss in the company... :))
-  * Search for "<LIS SOURCELIST" and change the complete path to the server the installfiles are avail also for the user. Needed, if other components of Office should be installed. Delete the "<!--" at the beginning of the line and the --> at the end of the line when adding the installation-server
-  * Search for "MyOrganisation" and change it to the name of your organisation.
-  * Normally the language should be set to the language of the OS. You can add more by removing the "<!--" at the beginning of the line and the --> at the end of the line of each other language.
-  * Search for "MyRegKey_MyRegKey" and replace it with the registration-key of your Office-Product.
-<Configuration Product="ProPlus">
-        <Display Level="basic" CompletionNotice="No" SuppressModal="Yes" AcceptEula="Yes" NoCancel="Yes" /> -->
-        <!-- <Logging Type="standard" Path="%temp%" Template="Microsoft Office Professional Plus Setup(*).txt" /> -->
-        <USERNAME Value="MyOrganisation" /> -->
-        <COMPANYNAME Value="MyCompany" /> -->
-        <PIDKEY Value="MyRegKey_MyRegKey" />
-        <AddLanguage Id="match" ShellTransform="yes"/>
-        <!-- <AddLanguage Id="en-us" /> -->
-        <!-- <AddLanguage Id="fr-fr" /> -->
-        <!-- <AddLanguage Id="de-de" /> -->
-        <!-- <AddLanguage Id="es-es" /> -->
-        <!-- <INSTALLLOCATION Value="%programfiles%\Microsoft Office" /> -->
-        <!-- <LIS CACHEACTION="CacheOnly" /> -->
-        <!-- <LIS SOURCELIST="\\server1\share\Office;\\server2\share\Office" /> -->
-        <!-- <DistributionPoint Location="\\server\share\Office" /> -->
-        <!-- <OptionState Id="OptionID" State="absent" Children="force" /> -->
-        <!-- <Setting Id="SETUP_REBOOT" Value="IfNeeded" /> -->
-        <!-- <Command Path="%windir%\system32\msiexec.exe" Args="/i \\server\share\my.msi" QuietArg="/q" ChainPosition="after" Execute="install" /> -->
-</Configuration>
-</code>

OPSI DokuWiki

User Tools

Site Tools

Differences

Page Tools