This is an old revision of the document!
[root]
; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/
;Set $MsiId32$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
Set $UninstallProgram32$ = $InstallDir32$ + "\uninstall\helper.exe"
;Set $MsiId64$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
Set $UninstallProgram64$ = $InstallDir64$ + "\uninstall\helper.exe"
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Uninstalling " + $ProductId$ + " 32 Bit..."
if FileExists($UninstallProgram32$)
comment "Uninstall program found, starting uninstall"
Killtask "firefox.exe"
Winbatch_uninstall_32
sub_check_exitcode
endif
if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId32$ + "] DisplayName") = "")
comment "MSI id " + $MsiId32$ + " found in registry, starting msiexec to uninstall"
Killtask "firefox.exe"
Winbatch_uninstall_msi_32
sub_check_exitcode
endif
comment "Delete files"
Files_uninstall_32 /32Bit
comment "Cleanup registry"
Registry_uninstall /32Bit
endif
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Uninstalling " + $ProductId$ + " 64 Bit..."
if FileExists($UninstallProgram64$)
comment "Uninstall program found, starting uninstall"
Killtask "firefox.exe"
Winbatch_uninstall_64
sub_check_exitcode
endif
if not (GetRegistryStringValue64("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId64$ + "] DisplayName") = "")
comment "MSI id " + $MsiId64$ + " found in registry, starting msiexec to uninstall"
Killtask "firefox.exe"
Winbatch_uninstall_msi_64
sub_check_exitcode
endif
comment "Delete files"
Files_uninstall_64 /64Bit
comment "Cleanup registry"
Registry_uninstall /64Bit
endif
comment "Delete program shortcuts"
LinkFolder_uninstall
[Winbatch_uninstall_32]
;"%ScriptPath%\files\kill.exe" -k "firefox.exe"
"$InstallDir32$\uninstall\helper.exe" /S
;Category, Link in Category, Folder in Startmenu
;"%ScriptPath%\files\uninst.cmd" "Internet" "Mozilla Firefox" "Mozilla Firefox"
; Choose one of the following examples as basis for program uninstall
;
; === Nullsoft Scriptable Install System ================================================================
; "$UninstallProgram32$" /S
;
; === Inno Setup ========================================================================================
; "$UninstallProgram32$" /silent /norestart
[Winbatch_uninstall_msi_32]
msiexec /x $MsiId32$ /qb! REBOOT=ReallySuppress
[Files_uninstall_32]
; Example for recursively deleting the installation directory (don't forget the trailing backslash):
;
; delete -sf "$InstallDir32$\"
[Winbatch_uninstall_64]
;"%ScriptPath%\files\kill.exe" -k "firefox.exe"
"$InstallDir64$\uninstall\helper.exe" /S
;Category, Link in Category, Folder in Startmenu
;"%ScriptPath%\files\uninst.cmd" "Internet" "Mozilla Firefox" "Mozilla Firefox"
; Choose one of the following examples as basis for program uninstall
;
; === Nullsoft Scriptable Install System ================================================================
; "$UninstallProgram64$" /S
;
; === Inno Setup ========================================================================================
; "$UninstallProgram64$" /silent /norestart
[Winbatch_uninstall_msi_64]
msiexec /x $MsiId64$ /qb! REBOOT=ReallySuppress
[Files_uninstall_64]
; Example for recursively deleting the installation directory (don't forget the trailing backslash):
;
; delete -sf "$InstallDir64$\"
[Registry_uninstall]
; Example of deleting a registry key:
;
; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
[LinkFolder_uninstall]
; Example of deleting a folder from AllUsers startmenu:
;
; set_basefolder common_programs
; delete_subfolder $ProductId$
;
; Example of deleting a shortcut from AllUsers desktop:
;
; set_basefolder common_desktopdirectory
; set_subfolder ""
; delete_element $ProductId$
set_basefolder common_programs
set_subfolder "Internet"
delete_element "Mozilla Firefox"
delete_subfolder "Mozilla Firefox"
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif
; Copyright (c) uib gmbh (www.uib.de) ; This sourcecode is owned by uib ; and published under the Terms of the General Public License. ; credits: http://www.opsi.org/credits/ [Actions] requiredWinstVersion >= "4.10.8.6" DefVar $MsiId32$ DefVar $UninstallProgram32$ DefVar $MsiId64$ DefVar $UninstallProgram64$ DefVar $LogDir$ DefVar $ProductCat$ DefVar $ProductId$ DefVar $ProductVersion$ DefVar $AllUsersDesktopLink$ DefVar $AllUsersStartMenuDir$ DefVar $MinimumSpace$ DefVar $InstallDir32$ DefVar $InstallDir64$ DefVar $ExitCode$ DefVar $LicenseRequired$ DefVar $LicenseKey$ DefVar $LicensePool$ DefVar $INST_SystemType$ DefVar $INST_architecture$ Set $INST_SystemType$ = GetSystemType set $INST_architecture$ = GetProductProperty("install_architecture","system specific") Set $LogDir$ = "%SystemDrive%\tmp" ; ---------------------------------------------------------------- ; - Please edit the following values - ; ---------------------------------------------------------------- ;$ProductId$ should be the name of the product in opsi ; therefore please: only lower letters, no umlauts, ; no white space use '-' as a seperator Set $ProductCat$ = "Internet" Set $ProductId$ = "Firefox" Set $ProductVersion$ = "10.0.10" Set $AllUsersDesktopLink$ = "Mozilla Firefox" Set $AllUsersStartMenuDir$ = "Mozilla Firefox" Set $MinimumSpace$ = "200 MB" ; the path were we find the product after the installation Set $InstallDir32$ = "%ProgramFiles32Dir%\Mozilla Firefox" Set $InstallDir64$ = "%ProgramFiles32Dir%\Mozilla Firefox" Set $LicenseRequired$ = "false" Set $LicensePool$ = "p_" + $ProductId$ ; ---------------------------------------------------------------- if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$)) LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$ isFatalError ; Stop process and set installation status to failed else comment "Show product picture" ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ + " " + $ProductVersion$ if FileExists("%ScriptPath%\delsub.ins") comment "Start uninstall sub section" Sub "%ScriptPath%\delsub.ins" endif if $LicenseRequired$ = "true" comment "Licensing required, reserve license and get license key" Sub_get_licensekey endif comment "installing" if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only") Message "Installing " + $ProductId$ + " 32 Bit..." comment "Start setup program" Winbatch_install_32 Sub_check_exitcode comment "Copy files" Files_install_32 /32Bit comment "Patch Registry" Registry_install /32Bit comment "Create shortcuts" LinkFolder_install endif if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only")) Message "Installing " + $ProductId$ + " 64 Bit..." comment "Start setup program" Winbatch_install_64 Sub_check_exitcode comment "Copy files" Files_install_64 /64Bit comment "Patch Registry" Registry_install /64Bit comment "Create shortcuts" LinkFolder_install endif endif [Winbatch_install_32] "%ScriptPath%\files\Firefox Setup $ProductVersion$esr.exe" -ms -ira ;"%ScriptPath%\files\menu.cmd" "$ProductCat$" "$ProductId$" "$ProductVersion$" "$AllUsersDesktopLink$" "$AllUsersStartMenuDir$" ; Choose one of the following examples as basis for your installation ; You can use $LicenseKey$ var to pass a license key to the installer ; ; === Nullsoft Scriptable Install System ================================================================ ; "%ScriptPath%\Setup.exe" /S ; ; === MSI package ======================================================================================= ; You may use the parameter PIDKEY=$Licensekey$ ; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress ; ; === InstallShield + MSI===================================================================================== ; Attention: The path to the log file should not contain any whitespaces ; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=2 REBOOT=ReallySuppress" ; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress" ; ; === InstallShield ===================================================================================== ; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss" ; "%ScriptPath%\setup.exe" /s /sms /f1"%ScriptPath%\setup.iss" /f2"$LogDir$\$ProductId$.install_log.txt" ; ; === Inno Setup ======================================================================================== ; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html ; You may create setup answer file by: setup.exe /SAVEINF="filename" ; You may use an answer file by the parameter /LOADINF="filename" ; "%ScriptPath%\setup.exe" /sp- /silent /norestart [Files_install_32] ; Example of recursively copying some files into the installation directory: ; ; copy -s "%ScriptPath%\files\*.*" "$InstallDir32$" copy "%CommonDesktopDir%\$AllUsersDesktopLink$.lnk" "%CommonStartmenuDir%\Programme\$ProductCat$" copy "%CommonStartmenuDir%\Programme\$AllUsersStartMenuDir$\$AllUsersDesktopLink$.lnk" "%CommonStartmenuDir%\Programme\$ProductCat$" [Winbatch_install_64] "%ScriptPath%\files\Firefox Setup $ProductVersion$esr.exe" -ms -ira ;"%ScriptPath%\files\menu.cmd" "$ProductCat$" "$ProductId$" "$ProductVersion$" "$AllUsersDesktopLink$" "$AllUsersStartMenuDir$" ; Choose one of the following examples as basis for your installation ; You can use $LicenseKey$ var to pass a license key to the installer ; ; === Nullsoft Scriptable Install System ================================================================ ; "%ScriptPath%\Setup.exe" /S ; ; === MSI package ======================================================================================= ; You may use the parameter PIDKEY=$Licensekey$ ; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress ; ; === InstallShield + MSI===================================================================================== ; Attention: The path to the log file should not contain any whitespaces ; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=2 REBOOT=ReallySuppress" ; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress" ; ; === InstallShield ===================================================================================== ; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss" ; "%ScriptPath%\setup.exe" /s /sms /f1"%ScriptPath%\setup.iss" /f2"$LogDir$\$ProductId$.install_log.txt" ; ; === Inno Setup ======================================================================================== ; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html ; You may create setup answer file by: setup.exe /SAVEINF="filename" ; You may use an answer file by the parameter /LOADINF="filename" ; "%ScriptPath%\setup.exe" /sp- /silent /norestart [Files_install_64] ; Example of recursively copying some files into the installation directory: ; ; copy -s "%ScriptPath%\files\*.*" "$InstallDir64$" copy "%CommonDesktopDir%\$AllUsersDesktopLink$.lnk" "%CommonStartmenuDir%\Programme\$ProductCat$" copy "%CommonStartmenuDir%\Programme\$AllUsersStartMenuDir$\$AllUsersDesktopLink$.lnk" "%CommonStartmenuDir%\Programme\$ProductCat$" [Registry_install] ; Example of setting some values of an registry key: ; ; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$] ; set "name1" = "some string value" ; set "name2" = REG_DWORD:0001 ; set "name3" = REG_BINARY:00 af 99 cd [LinkFolder_install] ; Example of deleting a folder from AllUsers startmenu: ; ; set_basefolder common_programs ; delete_subfolder $ProductId$ ; ; Example of creating an shortcut to the installed exe in AllUsers startmenu: ; ; set_basefolder common_programs ; set_subfolder $ProductId$ ; ; set_link ; name: $ProductId$ ; target: <path to the program> ; parameters: ; working_dir: $InstallDir$ ; icon_file: ; icon_index: ; end_link ; ; Example of creating an shortcut to the installed exe on AllUsers desktop: ; ; set_basefolder common_desktopdirectory ; set_subfolder "" ; ; set_link ; name: $ProductId$ ; target: <path to the program> ; parameters: <some_param> ; working_dir: $InstallDir$ ; icon_file: <path to icon file> ; icon_index: 2 ; end_link set_basefolder common_programs delete_subfolder "$AllUsersStartMenuDir$" set_basefolder common_programs set_subfolder "" delete_element "$AllUsersDesktopLink$" set_basefolder common_desktopdirectory set_subfolder "" delete_element "$AllUsersDesktopLink$" ; set_basefolder common_programs ; set_subfolder "$ProductCat$" ; set_link ; name: $AllUsersDesktopLink$ ; target: "$InstallDir32$\$ProductId$.exe" ; working_dir: "$InstallDir32$" ; icon_file: "$InstallDir32$\$ProductId$.exe" ; icon_index: 0 ; end_link [Sub_get_licensekey] comment "License management is enabled and will be used" comment "Trying to get a license key" Set $LicenseKey$ = demandLicenseKey ($LicensePool$) ; If there is an assignment of exactly one licensepool to the product the following call is possible: ; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$) ; ; If there is an assignment of a license pool to a windows software id, it is possible to use: ; DefVar $WindowsSoftwareId$ ; $WindowsSoftwareId$ = "..." ; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$) DefVar $ServiceErrorClass$ set $ServiceErrorClass$ = getLastServiceErrorClass comment "Error class: " + $ServiceErrorClass$ if $ServiceErrorClass$ = "None" comment "Everything fine, we got the license key '" + $LicenseKey$ + "'" else if $ServiceErrorClass$ = "LicenseConfigurationError" LogError "Fatal: license configuration must be corrected" LogError getLastServiceErrorMessage isFatalError else if $ServiceErrorClass$ = "LicenseMissingError" LogError "Fatal: required license is not supplied" isFatalError endif endif endif [Sub_check_exitcode] comment "Test for installation success via exit code" set $ExitCode$ = getLastExitCode ; informations to exit codes see ; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx ; http://msdn.microsoft.com/en-us/library/aa368542.aspx if ($ExitCode$ = "0") comment "Looks good: setup program gives exitcode zero" else comment "Setup program gives a exitcode unequal zero: " + $ExitCode$ if ($ExitCode$ = "1605") comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed." comment "Uninstall of a not installed product failed - no problem" else if ($ExitCode$ = "1641") comment "looks good: setup program gives exitcode 1641" comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success." else if ($ExitCode$ = "3010") comment "looks good: setup program gives exitcode 3010" comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success." else logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$ isFatalError endif endif endif endif
; Copyright (c) uib gmbh (www.uib.de) ; This sourcecode is owned by uib gmbh ; and published under the Terms of the General Public License. ; credits: http://www.opsi.org/credits/ [Actions] requiredWinstVersion >= "4.10.8.6" DefVar $MsiId32$ DefVar $UninstallProgram32$ DefVar $MsiId64$ DefVar $UninstallProgram64$ DefVar $LogDir$ DefVar $ExitCode$ DefVar $ProductId$ DefVar $InstallDir32$ DefVar $InstallDir64$ DefVar $LicenseRequired$ DefVar $LicensePool$ DefVar $INST_SystemType$ DefVar $INST_architecture$ Set $INST_SystemType$ = GetSystemType set $INST_architecture$ = GetProductProperty("install_architecture","system specific") Set $LogDir$ = "%SystemDrive%\tmp" ; ---------------------------------------------------------------- ; - Please edit the following values - ; ---------------------------------------------------------------- Set $ProductId$ = "firefox" Set $InstallDir32$ = "%ProgramFiles32Dir%\Mozilla Firefox" Set $InstallDir64$ = "%ProgramFiles32Dir%\Mozilla Firefox" Set $LicenseRequired$ = "false" Set $LicensePool$ = "p_" + $ProductId$ ; ---------------------------------------------------------------- comment "Show product picture" ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$ Message "Uninstalling " + $ProductId$ + " ..." if FileExists("%ScriptPath%\delsub.ins") comment "Start uninstall sub section" Sub "%ScriptPath%\delsub.ins" endif if $LicenseRequired$ = "true" comment "Licensing required, free license used" Sub_free_license endif [Sub_free_license] comment "License management is enabled and will be used" comment "Trying to free license used for the product" DefVar $result$ Set $result$ = FreeLicense($LicensePool$) ; If there is an assignment of a license pool to the product, it is possible to use ; Set $result$ = FreeLicense("", $ProductId$) ; ; If there is an assignment of a license pool to a windows software id, it is possible to use ; DefVar $WindowsSoftwareId$ ; $WindowsSoftwareId$ = "..." ; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)