Differences

This shows you the differences between two versions of the page.

--- userspace:netfx_4.0 [2011/11/09 08:00]
Thomas_H
+++ userspace:netfx_4.0 [2021/08/23 08:37]
@@ Line 1: / Line 1: @@
-====== .NetFX 4.0 ======
-Tested with opsi 4.0.1\\
-requiredWinstVersion >= 4.10.8.6
-By  //[[hungerharke@gmx.de|Thomas_H]] 2011/11/09 08:56// \\
-The installation-files can be downloaded at http://www.microsoft.com/downloads/de-de/details.aspx?FamilyID=0a391abd-25c1-4fc0-919f-b21f31ab88b7
-Special thanks to: joerg.ludwig for his code, to be found in the [url="https://forum.opsi.org/viewtopic.php?f=7&t=957&start=30"]forum[/url] which solved the problem of a failed installation when re-installing the OS on a PC.
-Tree:\\
-AutoIt3.exe\\
-delsub.ins\\
-dotNetFX.jpg\\
-dotNetFx40_Full_x86_x64.exe\\
-setup.ins\\
-uninstall.ins
-==== setup.ins ====
-<code winst>
-[Initial]
-LogLevel=9
-;  Log Errors in Logfile but don't abort:
-ExitOnError=false
-; Show syntax errors in the script:
-ScriptErrorMessages=on
-; Dont trace step by step through the script:
-TraceMode=off
-; let started programs run in front of the winst window
-StayOnTop=false
-[Actions]
-requiredWinstVersion >= "4.10.8.6"
-DefVar $UninstallProgram32$
-DefVar $UninstallProgram64$
-DefVar $ProductId$
-DefVar $MinimumSpace$
-DefVar $InstallDir32$
-DefVar $InstallDir64$
-DefVar $ExitCode$
-DefVar $LicenseRequired$
-DefVar $LicenseKey$
-DefVar $LicensePool$
-DefVar $INST_SystemType$
-DefVar $INST_architecture$
-DefVar $Version$
-DefVar $Inst_Cmd32$
-DefVar $Inst_Cmd64$
-DefVar $Uninst_Cmd32$
-DefVar $Uninst_Cmd64$
-DefVar $Inst_Prg$
-DefVar $Uninst_Prg$
-DefVar $LogDir$
-DefVar $opsiadminuser$
-DefVar $opsiadminpwd$
-Set $INST_SystemType$ = GetSystemType
-set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
-Set $LogDir$ = "%SystemDrive%\tmp"
-; ----------------------------------------------------------------
-; - Please edit the following values                             -
-; ----------------------------------------------------------------
-;$ProductId$ should be the name of the product in opsi
-; therefore please: only lower letters, no umlauts,
-; no white space use '-' as a seperator
-Set $ProductId$       = "dotNetFX"
-Set $Version$         = "4.0"
-Set $MinimumSpace$    = "55 MB"
-; the path were we find the product after the installation
-Set $InstallDir32$    = "%Systemroot%\Microsoft.NET\Framework\v4.0.30319\SetupCache\Extended\"
-Set $InstallDir64$    = "%Systemroot%\Microsoft.NET\Framework64\v4.0.30319\SetupCache\Extended\"
-Set $LicenseRequired$ = "false"
-Set $LicensePool$     = "p_" + $ProductId$
-Set $Inst_Prg$        = "dotNetFx40_Full_x86_x64.exe"
-Set $Inst_Cmd32$      = '/passive /norestart'
-Set $Inst_Cmd64$      = 'NOT NEEDED HERE!'
-Set $Uninst_Cmd32$    = '/uninstall /x86 /x64 /ia64 /parameterfolder Extended /passive /norestart'
-Set $Uninst_Cmd64$    = '/uninstall /x86 /x64 /ia64 /parameterfolder Extended /passive /norestart'
-Set $Uninst_Prg$        = "setup.exe"
-Set $opsiadminuser$ = "opsiSetupAdmin"
-Set $opsiadminpwd$ = randomstr
-; ----------------------------------------------------------------
-if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
-        LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
-        isFatalError
-        ; Stop process and set installation status to failed
-else
-        comment "Show product picture"
-        ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$+" "+$Version$
-        if FileExists("%ScriptPath%\delsub.ins")
-                comment "Start uninstall sub section"
-                Sub "%ScriptPath%\delsub.ins"
-        endif
-        if $LicenseRequired$ = "true"
-                comment "Licensing required, reserve license and get license key"
-                Sub_get_licensekey
-        endif
-        comment "installing"
-        Message "Copying Setup to Disk..."
-        FilesCopy
-        Message "Installing " + $ProductId$ + " 32 Bit..."
-        comment "Start setup program"
-        DosBatchUserdel
-        DosBatchUseradd
-        DefStringList $res$
-        Set $res$ = getOutStreamFromSection("ExecWithSetup '%ScriptPath%\AutoIt3.exe' WINST")
-        if count($res$) = "1"
-            DefVar $e$
-            Set $e$ = takeString(0, $res$)
-            Comment "setup exit code: " + $e$
-            if ($e$ = "1614") or ($e$ = "3010")
-                ExitWindows /Reboot
-            endif
-        else
-            LogError "Fatal: Setup did not return exit code!"
-            IsFatalError
-        endif
-        DosBatchUserdel
-        ; Ok, let's check, if .Net Framework was installed...
-        if not(FileExists("%systemroot%\Microsoft.NET\Framework\v4.0.30319"))
-            LogError "Fatal: Framework not found!"
-            IsFatalError
-        endif
-        FilesDelete
-        Sub_check_exitcode
-endif
-[FilesCopy]
-copy "%ScriptPath%\dotNetFx40_Full_x86_x64.exe" "$LogDir$"
-[DosBatchUseradd]
-net user "$opsiadminuser$" "$opsiadminpwd$" /add
-net localgroup Administratoren /add "$opsiadminuser$"
-[DosBatchUserdel]
-net user "$opsiadminuser$" /delete
-rmdir /s /q "%ProfileDir%\$opsiadminuser$"
-[ExecWithSetup]
-; http://msdn.microsoft.com/library/ee942965%28v=VS.100%29.aspx
-; return exit code via stdout as winst cannot read exit codes from ExecWith
-$ExitCode = RunAsWait("$opsiadminuser$", @ComputerName, "$opsiadminpwd$", 1, _
-  '"$LogDir$\$Inst_Prg$" $Inst_Cmd32$')
-if not @error then
-  ConsoleWrite($exitcode)
-endif
-[FilesDelete]
-delete "$LogDir$/$Inst_Prg$"
-[Sub_check_exitcode]
-comment "Test for installation success via exit code"
-set $ExitCode$ = getLastExitCode
-; informations to exit codes see
-; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
-; http://msdn.microsoft.com/en-us/library/aa368542.aspx
-if ($ExitCode$ = "0")
-        comment "Looks good: setup program gives exitcode zero"
-else
-        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
-        if ($ExitCode$ = "1605")
-                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
-                comment "Uninstall of a not installed product failed - no problem"
-        else
-                if ($ExitCode$ = "1641")
-                        comment "looks good: setup program gives exitcode 1641"
-                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
-                else
-                        if ($ExitCode$ = "3010")
-                                comment "looks good: setup program gives exitcode 3010"
-                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
-                        else
-                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
-                                isFatalError
-                        endif
-                endif
-        endif
-endif
-</code>
-==== uninstall.ins ====
-<code winst>
-[Initial]
-LogLevel=9
-;  Log Errors in Logfile but don't abort:
-ExitOnError=false
-; Show syntax errors in the script:
-ScriptErrorMessages=on
-; Dont trace step by step through the script:
-TraceMode=off
-; let started programs run in front of the winst window
-StayOnTop=false
-[Actions]
-requiredWinstVersion >= "4.10.8.6"
-DefVar $UninstallProgram32$
-DefVar $UninstallProgram64$
-DefVar $LogDir$
-DefVar $ExitCode$
-DefVar $ProductId$
-DefVar $InstallDir32$
-DefVar $InstallDir64$
-DefVar $LicenseRequired$
-DefVar $LicensePool$
-DefVar $INST_SystemType$
-DefVar $INST_architecture$
-DefVar $Uninst_Cmd32$
-DefVar $Uninst_Cmd64$
-DefVar $Uninst_Prg$
-Set $INST_SystemType$ = GetSystemType
-set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
-Set $LogDir$ = "%SystemDrive%\tmp"
-; ----------------------------------------------------------------
-; - Please edit the following values                             -
-; ----------------------------------------------------------------
-Set $ProductId$       = "dotNETFx"
-Set $InstallDir32$    = "%Systemroot%\Microsoft.NET\Framework\v4.0.30319\SetupCache\Extended\"
-Set $InstallDir64$    = "%Systemroot%\Microsoft.NET\Framework64\v4.0.30319\SetupCache\Extended\"
-Set $LicenseRequired$ = "false"
-Set $LicensePool$     = "p_" + $ProductId$
-Set $Uninst_Prg$        = "setup.exe"
-Set $Uninst_Cmd32$        = '/uninstall /x86 /x64 /ia64 /parameterfolder Extended /passive /norestart'
-Set $Uninst_Cmd64$        = '/uninstall /x86 /x64 /ia64 /parameterfolder Extended /passive /norestart'
-; ----------------------------------------------------------------
-comment "Show product picture"
-ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$
-Message "Uninstalling " + $ProductId$ + " ..."
-if FileExists("%ScriptPath%\delsub.ins")
-        comment "Start uninstall sub section"
-        Sub "%ScriptPath%\delsub.ins"
-endif
-if $LicenseRequired$ = "true"
-        comment "Licensing required, free license used"
-        Sub_free_license
-endif
-ExitWindows /Reboot
-[Sub_free_license]
-comment "License management is enabled and will be used"
-comment "Trying to free license used for the product"
-DefVar $result$
-Set $result$ = FreeLicense($LicensePool$)
-; If there is an assignment of a license pool to the product, it is possible to use
-; Set $result$ = FreeLicense("", $ProductId$)
-;
-; If there is an assignment of a license pool to a windows software id, it is possible to use
-; DefVar $WindowsSoftwareId$
-; $WindowsSoftwareId$ = "..."
-; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
-</code>
-==== delsub.ins ====
-<code winst>
-Set $UninstallProgram32$ = $InstallDir32$+"\"+$Uninst_Prg$
-Set $UninstallProgram64$ = $InstallDir64$+"\"+$Uninst_Prg$
-if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
-        Message "Uninstalling " + $ProductId$ + " 32 Bit..."
-        if FileExists($UninstallProgram32$)
-                comment "Uninstall program found, starting uninstall"
-                Winbatch_uninstall_32
-                comment "Removing "+$InstallDir32$
-                Files_uninstall_32
-                sub_check_exitcode
-        endif
-Mendif
-if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
-        Message "Uninstalling " + $ProductId$ + " 64 Bit..."
-        if FileExists($UninstallProgram64$)
-                comment "Uninstall program found, starting uninstall"
-                Winbatch_uninstall_64
-                comment "Removing "+$InstallDir64$
-                Files_uninstall_64
-                sub_check_exitcode
-        endif
-endif
-[Winbatch_uninstall_32]
-$UninstallProgram32$ $Uninst_Cmd32$
-[Winbatch_uninstall_64]
-$UninstallProgram64$ $Uninst_Cmd64$
-[Files_uninstall_32]
-; Example for recursively deleting the installation directory (don't forget the trailing backslash):
-;
-delete -sf "$InstallDir32$\"
-[Files_uninstall_64]
-; Example for recursively deleting the installation directory (don't forget the trailing backslash):
-;
-delete -sf "$InstallDir64$\"
-[Sub_check_exitcode]
-comment "Test for installation success via exit code"
-set $ExitCode$ = getLastExitCode
-; informations to exit codes see
-; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
-; http://msdn.microsoft.com/en-us/library/aa368542.aspx
-if ($ExitCode$ = "0")
-        comment "Looks good: setup program gives exitcode zero"
-else
-        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
-        if ($ExitCode$ = "1605")
-                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
-                comment "Uninstall of a not installed product failed - no problem"
-        else
-                if ($ExitCode$ = "1641")
-                        comment "looks good: setup program gives exitcode 1641"
-                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
-                else
-                        if ($ExitCode$ = "3010")
-                                comment "looks good: setup program gives exitcode 3010"
-                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
-                        else
-                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
-                                isFatalError
-                        endif
-                endif
-        endif
-endif
-</code>

OPSI DokuWiki

User Tools

Site Tools

Differences

Page Tools