OPSI DokuWiki

This is an old revision of the document!

PDF-Creator

Tested with opsi 4.0.1
requiredWinstVersion >= 4.10.8.6
For 32 Bit
Installationfiles are available at: http://www.pdfforge.org/

By Thomas_H 2011/10/28 08:49

Tree:

PDF-Creator.jpg
PDFCreator-1_2_3_setup.exe
delsub.ins
pdfcreator.ini
setup.ins
uninstall.ins

Please note: The pdfcreator.ini is needed to avoid the installation of a toolbar in your browser.
Hinweis : Die pdfcreator.ini wird benötigt um die Installation einer Toolbar im Browser zu verhindern.

setup.ins

<code winst> [Initial] LogLevel=9 ; Log Errors in Logfile but don't abort: ExitOnError=false ; Show syntax errors in the script: ScriptErrorMessages=on ; Dont trace step by step through the script: TraceMode=off ; let started programs run in front of the winst window StayOnTop=false

[Actions] requiredWinstVersion >= “4.10.8.6”

DefVar $MsiId32$ DefVar $MsiId64$ DefVar $LogDir$ DefVar $ProductId$ DefVar $MinimumSpace$ DefVar $InstallDir32$ DefVar $InstallDir64$ DefVar $ExitCode$ DefVar $LicenseRequired$ DefVar $LicenseKey$ DefVar $LicensePool$ DefVar $INST_SystemType$ DefVar $INST_architecture$ DefVar $Version$ DefVar $Inst_Cmd$ DefVar $Inst_Prg32$ DefVar $Inst_Prg64$ DefVar $Uninst_Cmd$ DefVar $Uninst_Prg$

Set $INST_SystemType$ = GetSystemType set $INST_architecture$ = GetProductProperty(“install_architecture”,“system specific”)

Set $LogDir$ = “%SystemDrive%\tmp”

; —————————————————————- ; - Please edit the following values - ; —————————————————————- ;$ProductId$ should be the name of the product in opsi ; therefore please: only lower letters, no umlauts, ; no white space use '-' as a seperator Set $ProductId$ = “PDF-Creator” Set $Version$ = “1.2.3” Set $MinimumSpace$ = “10 MB” ; the path were we find the product after the installation Set $InstallDir32$ = “%ProgramFilesDir%\PDFCreator\” Set $LicenseRequired$ = “false” Set $LicensePool$ = “p_” + $ProductId$ Set $Inst_Prg32$ = “PDFCreator-1_2_3_setup.exe” Set $Inst_Cmd$ = '/SILENT /NOCANCEL /NOICONS /LANG=De /NORESTART /LOADINF=%ScriptPath%\pdfcreator.ini' Set $Uninst_Cmd$ = '/SILENT /NOCANCEL' Set $Uninst_Prg$ = “unins000.exe” ; —————————————————————-

comment “Show product picture” ShowBitmap “%ScriptPath%\” + $ProductId$ + “.jpg” $ProductId$

if not(HasMinimumSpace (“%SystemDrive%”, $MinimumSpace$))

      LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
      isFatalError
      ; Stop process and set installation status to failed

else

      if FileExists("$InstallDir32\$Uninst_Prg$")
              comment "Start uninstall sub section"
              Sub "%ScriptPath%\delsub.ins"
      endif

      if $LicenseRequired$ = "true"
              comment "Licensing required, reserve license and get license key"
              Sub_get_licensekey
      endif

      comment "Installiere "+$ProductID$+"..."

      if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
              Message "Installiere " + $ProductId$+" (32 Bit)"
              comment "Start setup program"
              Winbatch_install_32
              Sub_check_exitcode
      endif

      if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
              Message "Installiere " + $ProductId$+" (64 Bit)"
              comment "Start setup program"

; KEIN Fehler: Das Programm gibt es nur als 32 Bit-Variante, darum nachfolgend:

              Winbatch_install_32
              Sub_check_exitcode
      endif

endif

[Winbatch_install_32] “%ScriptPath%\$Inst_Prg32$” $Inst_Cmd$

[Sub_check_exitcode] comment “Test for installation success via exit code” set $ExitCode$ = getLastExitCode if ($ExitCode$ = “0”)

      comment "Looks good: setup program gives exitcode zero"

else

      comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
      if ($ExitCode$ = "1605")
              comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
              comment "Uninstall of a not installed product failed - no problem"
      else
              if ($ExitCode$ = "1641")
                      comment "looks good: setup program gives exitcode 1641"
                      comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
              else
                      if ($ExitCode$ = "3010")
                              comment "looks good: setup program gives exitcode 3010"
                              comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
                      else
                              logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
                              isFatalError
                      endif
              endif
      endif

endif

<code>

uninstall.ins

<code winst> [Initial] LogLevel=9 ; Log Errors in Logfile but don't abort: ExitOnError=false ; Show syntax errors in the script: ScriptErrorMessages=on ; Dont trace step by step through the script: TraceMode=off ; let started programs run in front of the winst window StayOnTop=false

[Actions] requiredWinstVersion >= “4.10.8.6”

DefVar $MsiId32$ DefVar $UninstallProgram32$ DefVar $MsiId64$ DefVar $LogDir$ DefVar $ExitCode$ DefVar $ProductId$ DefVar $InstallDir32$ DefVar $InstallDir64$ DefVar $LicenseRequired$ DefVar $LicensePool$ DefVar $INST_SystemType$ DefVar $INST_architecture$ DefVar $Uninst_Prg$ DefVar $Uninst_Cmd$

Set $INST_SystemType$ = GetSystemType set $INST_architecture$ = GetProductProperty(“install_architecture”,“system specific”)

Set $LogDir$ = “%SystemDrive%\tmp”

; —————————————————————- ; - Please edit the following values - ; —————————————————————- Set $ProductId$ = “PDF-Creator” Set $InstallDir32$ = “%ProgramFiles32Dir%\PDFCreator\” Set $LicenseRequired$ = “false” Set $LicensePool$ = “p_” + $ProductId$ Set $Uninst_Cmd$ = '/SILENT /NOCANCEL' Set $Uninst_Prg$ = “unins000.exe” ; —————————————————————-

comment “Show product picture” ShowBitmap “%ScriptPath%\” + $ProductId$ + “.jpg” $ProductId$

Message “Deinstalliere ” + $ProductId$ + “. Bitte etwas Geduld…” comment “Start uninstall sub section” Sub “%ScriptPath%\delsub.ins”

if $LicenseRequired$ = “true”

      comment "Licensing required, free license used"
      Sub_free_license

endif

<code>

delsub.ins

<code winst> if ¹⁾ or ($INST_architecture$ = “both”) or ($INST_architecture$ = “32 only”)

      Message "Uninstalling " + $ProductId$ + " 32 Bit..."
      Winbatch_uninstall_32
      comment "Removing "+$InstallDir32$
      Files_uninstall_32
      sub_check_exitcode

Mendif

if ($INST_SystemType$ = “64 Bit System”) and ²⁾

      Message "Uninstalling " + $ProductId$ + " 32 Bit..."

; Kein Fehler: Das Programm gibt es nur in 32 Bit, darum nachfolgend:

      Winbatch_uninstall_32
      comment "Removing "+$InstallDir32$
      Files_uninstall_32
      sub_check_exitcode

endif

[Winbatch_uninstall_32] “$InstallDir32$\$Uninst_Prg$” $Uninst_Cmd$

[Files_uninstall_32] delete -sf “$InstallDir32$\”

[Sub_check_exitcode] comment “Test for installation success via exit code” set $ExitCode$ = getLastExitCode ; informations to exit codes see ; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx ; http://msdn.microsoft.com/en-us/library/aa368542.aspx if ($ExitCode$ = “0”)

      comment "Looks good: setup program gives exitcode zero"

else

      comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
      if ($ExitCode$ = "1605")
              comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
              comment "Uninstall of a not installed product failed - no problem"
      else
              if ($ExitCode$ = "1641")
                      comment "looks good: setup program gives exitcode 1641"
                      comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
              else
                      if ($ExitCode$ = "3010")
                              comment "looks good: setup program gives exitcode 3010"
                              comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
                      else
                              logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
                              isFatalError
                      endif
              endif
      endif

endif

<code>

pdfcreator.ini

<code> [Setup] Toolbar=0 <code>

¹⁾

$INST_SystemType$ = “x86 System”) and ($INST_architecture$ = “system specific”

²⁾

$INST_architecture$ = “system specific”) or ($INST_architecture$ = “both”) or ($INST_architecture$ = “64 only”

OPSI DokuWiki

User Tools

Site Tools

Table of Contents

PDF-Creator

setup.ins

uninstall.ins

delsub.ins

pdfcreator.ini

Page Tools