Differences

This shows you the differences between two versions of the page.

--- userspace:ultravnc_viewer [2013/08/06 07:27]
MrNiceguy
+++ userspace:ultravnc_viewer [2021/08/23 08:37]
@@ Line 1: / Line 1: @@
-\\
-**This is a master copy. Click on <edit this page> and copy the contents under "snipp". Then create the page for your own script, paste the content to the editor and modify it as you need it.**
-====== UltraVNC Viewer ======
-Tested with opsi 4.0.1\\
-requiredWinstVersion >= 4.11.3.6\\
-By //[[yonis@sport.med.tum.de|MrNiceguy]] 2013/08/05 16:58//
-Files can be downloaded at http://www.uvnc.com/downloads/ultravnc.html
-Tree:\\
- setup.ins\\
- uninstall.ins\\
- delsub.ins\\
- start.ins\\
- killtask.ins by [[tobias.friede@wki.frauenhofer.de|tobias]]\\
- ultravnc.ini\\
- ultravncInstall.inf\\
-=== setup.ins ===
-<code winst>
-; Copyright (c) uib gmbh (www.uib.de)
-; This sourcecode is owned by uib
-; and published under the Terms of the General Public License.
-; credits: http://www.opsi.org/credits/
-[Actions]
-requiredWinstVersion >= "4.10.8.6"
-DefVar $MsiId$
-DefVar $UninstallProgram$
-DefVar $LogDir$
-DefVar $ProductId$
-DefVar $MinimumSpace$
-DefVar $InstallDir$
-DefVar $ExitCode$
-DefVar $LicenseRequired$
-DefVar $LicenseKey$
-DefVar $LicensePool$
-Set $LogDir$ = "%SystemDrive%\tmp"
-; ----------------------------------------------------------------
-; - Please edit the following values                             -
-; ----------------------------------------------------------------
-;$ProductId$ should be the name of the product in opsi
-; therefore please: only lower letters, no umlauts,
-; no white space use '-' as a seperator
-Set $ProductId$       = "UltraVNC"
-Set $MinimumSpace$    = "5 MB"
-; the path were we find the product after the installation
-Set $InstallDir$      = "%ProgramFiles32Dir%\uvnc bvba\UltraVNC"
-Set $LicenseRequired$ = "false"
-Set $LicensePool$     = "p_" + $ProductId$
-; ----------------------------------------------------------------
-if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
-	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
-	isFatalError
-	; Stop process and set installation status to failed
-else
-	comment "Show product picture"
-	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
-	if FileExists($InstallDir$ + "\winvnc.exe")
-		comment "Start uninstall sub section"
-		Sub "%ScriptPath%\killtask.ins"
-		Sub "%ScriptPath%\delsub32.ins"
-	endif
-	Message "Installing " + $ProductId$ + " ..."
-	if $LicenseRequired$ = "true"
-		comment "Licensing required, reserve license and get license key"
-		Sub_get_licensekey
-	endif
-	comment "Start setup program"
-	Winbatch_install
-	Sub_check_exitcode
-	comment "Copy files"
-	Files_install /32Bit
-	comment "Start application"
-	Sub "%ScriptPath%\start.ins"
-endif
-[Winbatch_install]
- "%ScriptPath%\Setup.exe" /verysilent /LOADINF="%ScriptPath%\ultravncInstall.inf" /log /norestart
-[Files_install]
- copy -s "%ScriptPath%\ultravnc.ini" $InstallDir$
-[Sub_get_licensekey]
-if opsiLicenseManagementEnabled
-	comment "License management is enabled and will be used"
-	comment "Trying to get a license key"
-	Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
-	; If there is an assignment of exactly one licensepool to the product the following call is possible:
-	; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
-	;
-	; If there is an assignment of a license pool to a windows software id, it is possible to use:
-	; DefVar $WindowsSoftwareId$
-	; $WindowsSoftwareId$ = "..."
-	; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
-	DefVar $ServiceErrorClass$
-	set $ServiceErrorClass$ = getLastServiceErrorClass
-	comment "Error class: " + $ServiceErrorClass$
-	if $ServiceErrorClass$ = "None"
-		comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
-	else
-		if $ServiceErrorClass$ = "LicenseConfigurationError"
-			LogError "Fatal: license configuration must be corrected"
-			LogError getLastServiceErrorMessage
-			isFatalError
-		else
-			if $ServiceErrorClass$ = "LicenseMissingError"
-				LogError "Fatal: required license is not supplied"
-				isFatalError
-			endif
-		endif
-	endif
-else
-	LogError "Fatal: license required, but license management not enabled"
-	isFatalError
-endif
-[Sub_check_exitcode]
-comment "Test for installation success via exit code"
-set $ExitCode$ = getLastExitCode
-; informations to exit codes see
-; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
-; http://msdn.microsoft.com/en-us/library/aa368542.aspx
-if ($ExitCode$ = "0")
-	comment "Looks good: setup program gives exitcode zero"
-else
-	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
-	if ($ExitCode$ = "1605")
-		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
-		comment "Uninstall of a not installed product failed - no problem"
-	else
-		if ($ExitCode$ = "1641")
-			comment "looks good: setup program gives exitcode 1641"
-			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
-		else
-			if ($ExitCode$ = "3010")
-				comment "looks good: setup program gives exitcode 3010"
-				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
-			else
-				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
-				isFatalError
-			endif
-		endif
-	endif
-endif
-</code>
-===uninstall.ins===
-<code winst>
-; Copyright (c) uib gmbh (www.uib.de)
-; This sourcecode is owned by uib gmbh
-; and published under the Terms of the General Public License.
-; credits: http://www.opsi.org/credits/
-[Actions]
-requiredWinstVersion >= "4.10.8.6"
-DefVar $MsiId$
-DefVar $UninstallProgram$
-DefVar $LogDir$
-DefVar $ExitCode$
-DefVar $ProductId$
-DefVar $InstallDir$
-DefVar $LicenseRequired$
-DefVar $LicensePool$
-Set $LogDir$ = "%SystemDrive%\tmp"
-; ----------------------------------------------------------------
-; - Please edit the following values                             -
-; ----------------------------------------------------------------
-Set $ProductId$       = "opsi-template"
-Set $InstallDir$      = "%ProgramFiles32Dir%\uvnc bvba\UltraVNC"
-Set $LicenseRequired$ = "false"
-Set $LicensePool$     = "p_" + $ProductId$
-; ----------------------------------------------------------------
-comment "Show product picture"
-ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
-Message "Uninstalling " + $ProductId$ + " ..."
-if FileExists("%ScriptPath%\killtask.ins")
-	comment "Sart task kill sub section"
-	Sub "%ScriptPath%\killtask.ins"
-endif
-if FileExists("%ScriptPath%\delsub32.ins")
-	comment "Start uninstall sub section"
-	Sub "%ScriptPath%\delsub32.ins"
-endif
-if $LicenseRequired$ = "true"
-	comment "Licensing required, free license used"
-	Sub_free_license
-endif
-;[Sub_free_license]
-;comment "License management is enabled and will be used"
-;comment "Trying to free license used for the product"
-;DefVar $result$
-;Set $result$ = FreeLicense($LicensePool$)
-; If there is an assignment of a license pool to the product, it is possible to use
-; Set $result$ = FreeLicense("", $ProductId$)
-;
-; If there is an assignment of a license pool to a windows software id, it is possible to use
-; DefVar $WindowsSoftwareId$
-; $WindowsSoftwareId$ = "..."
-; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
-</code>
-===delsub.ins===
-<code winst>
-; Copyright (c) uib gmbh (www.uib.de)
-; This sourcecode is owned by uib gmbh
-; and published under the Terms of the General Public License.
-; credits: http://www.opsi.org/credits/
-Set $MsiId$ = '{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}'
-Set $UninstallProgram$ = $InstallDir$ + "\unins000.exe"
-Message "Uninstalling " + $ProductId$ + " ..."
-if FileExists($UninstallProgram$)
-;	comment "Uninstall program found, starting uninstall"
-	Winbatch_uninstall
-;	uninstall_exe
-	sub_check_exitcode
-endif
-;if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $MsiId$ + "] DisplayName") = "")
-;	comment "MSI id " + $MsiId$ + " found in registry, starting msiexec to uninstall"
-;	Winbatch_uninstall_msi
-;	sub_check_exitcode
-;endif
-;comment "Uninstall Exe"
-;Uninstall_exe /32Bit
-;comment "Uninstall"
-winbatch_uninstall
-comment "Delete files"
-Files_uninstall /32Bit
-comment "Cleanup registry"
-Registry_uninstall /32Bit
-comment "Delete program shortcuts"
-LinkFolder_uninstall
-[Winbatch_uninstall]
-; Choose one of the following examples as basis for program uninstall
-;
-; === Nullsoft Scriptable Install System ================================================================
-; "$UninstallProgram$" /S
-  ;net stop uvnc_service
-  ;sc delete uvnc_service
-  ;Sub "%ScriptPath%\killtask.ins"
-  "$UninstallProgram$" /silent /norestart /SUPPRESSMSGBOXES
-;
-; === Inno Setup ========================================================================================
-;[uninstall_exe]
-; net stop uvnc_service
-; sc delete uvnc_service
-; "$UninstallProgram$" /silent /norestart /SUPPRESSMSGBOXES
-;[Winbatch_uninstall_msi]
-;msiexec /x $MsiId$ /qb! REBOOT=ReallySuppress
-[Files_uninstall]
-; Example for recursively deleting the installation directory (don't forget the trailing backslash):
-;
- delete -sf "$InstallDir$\"
-[Registry_uninstall]
-; Example of deleting a registry key:
-;
-; deletekey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
-[LinkFolder_uninstall]
-; Example of deleting a folder from AllUsers startmenu:
-;
-; set_basefolder common_programs
-; delete_subfolder $ProductId$
-;
-; Example of deleting a shortcut from AllUsers desktop:
-;
-; set_basefolder common_desktopdirectory
-; set_subfolder ""
-; delete_element $ProductId$
-[Sub_check_exitcode]
-comment "Test for installation success via exit code"
-set $ExitCode$ = getLastExitCode
-; informations to exit codes see
-; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
-; http://msdn.microsoft.com/en-us/library/aa368542.aspx
-if ($ExitCode$ = "0")
-	comment "Looks good: setup program gives exitcode zero"
-else
-	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
-	if ($ExitCode$ = "1605")
-		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
-		comment "Uninstall of a not installed product failed - no problem"
-	else
-		if ($ExitCode$ = "1641")
-			comment "looks good: setup program gives exitcode 1641"
-			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
-		else
-			if ($ExitCode$ = "3010")
-				comment "looks good: setup program gives exitcode 3010"
-				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
-			else
-				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
-				isFatalError
-			endif
-		endif
-	endif
-endif
-</code>
-===killtask.ins===
-<code winst>
-[Actions]
-setloglevel = 6
-requiredWinstVersion >= "4.11.2.9"
-DefVar $process2$
-DefVar $subvar$
-DefVar $killtask$
-DefStringList $processlist$
-DefStringList $process$
-DefStringList $SearchProcess$
-;----------Definiere hier welche Programme gesucht und geschlossen werden sollen--------------------------------
-set $searchProcess$ = createStringList ('winvnc.exe')
-;sollen die Programme automatisch geschlossen werden? ACHTUNG: Datenverlust möglich!
-set $killtask$ = "true"
-;----------------------------------------------------------------------------------------------------------------
-for %s% in $SearchProcess$ do sub_checkfunktion
-[sub_checkfunktion]
-set $subvar$ = "%s%"
-set $processlist$ = getOutStreamFromSection('DosInAnIcon_checkprocess')
-set $process$ = splitString(takeString(1,$processlist$), ",")
-set $process2$ = unquote(takeString(1,$processlist$), '"')
-DosBatch_1
-if ($process2$ = $subvar$)
-Message = "Prozess gefunden"
-	if ($killtask$ = "true")
-		killtask $subvar$
-	else
-		message "killtask is set false"
-	endif
-else
-message = "Prozess nicht gefunden"
-endif
-[DosInAnIcon_checkprocess]
-@echo off
-TASKLIST /FI "IMAGENAME eq $subvar$" /fo CSV
-[DosBatch_1]
-	net stop uvnc_service
-	sc delete uvnc_service
-</code>
-===start.ins===
-<code>
- [Actions]
-setloglevel = 6
-requiredWinstVersion >= "4.11.2.9"
-DefVar $InstallDir$
-Set $InstallDir$ = "%ProgramFiles32Dir%\uvnc bvba\UltraVNC\winvnc.exe"
-;if FileExist("%ProgramFiles32Dir%\uvnc bvba\UltraVNC\winvnc.exe")
-	comment "Start Application"
-	DosBatch_1
-;endif
-[DosBatch_1]
-	"%ProgramFiles32Dir%\uvnc bvba\UltraVNC\winvnc.exe"
-</code>
-===ultravnc.ini===
-<code>
-[ultravnc]
-passwd = <password1>      full control password
-passwd2 = <password2>     view only password
-[admin]
-FileTransferEnabled=1
-FTUserImpersonation=1
-BlankMonitorEnabled=1
-BlankInputsOnly=0
-CaptureAlphaBlending=1
-BlackAlphaBlending=0
-DefaultScale=1
-UseDSMPlugin=0
-DSMPlugin=path to DSM Plugin
-DSMPluginConfig=configuration DSM Plugin
-primary=1
-secondary=0
-SocketConnect=1
-HTTPConnect=1
-XDMCPConnect=0
-AutoPortSelect=1
-InputsEnabled=1
-LocalInputsDisabled=0
-IdleTimeout=0
-EnableJapInput=0
-QuerySetting=2
-QueryTimeout=10
-QueryAccept=0
-LockSetting=0
-RemoveWallpaper=1
-RemoveEffects=0
-RemoveFontSmoothing=0
-RemoveAero=1
-DebugMode=2
-Avilog=0
-path=C:\Programme\uvnc bvba\UltraVnc\log                             		path to ultravnc
-DebugLevel=10
-AllowLoopback=0
-LoopbackOnly=0
-AllowShutdown=0
-AllowProperties=1
-AllowEditClients=1
-FileTransferTimeout=30
-KeepAliveInterval=5
-SocketKeepAliveTimeout=10000
-DisableTrayIcon=0
-MSLogonRequired=0
-NewMSLogon=0
-ConnectPriority=0
-UseRegistry=0
-AuthRequired=1
-AuthHosts=
-PortNumber=5900
-HTTPPortNumber=5800
-QueryIfNoLogon=1
-kickrdp=0
-clearconsole=0
-[admin_auth]
-group1=Domain\Admingroup
-group2=
-group3=
-locdom1=0
-locdom2=0
-locdom3=0
-[poll]
-TurboMode=1
-PollUnderCursor=0
-PollForeground=0
-PollFullScreen=1
-OnlyPollConsole=0
-OnlyPollOnEvent=0
-MaxCpu=40
-EnableDriver=0
-EnableHook=1
-EnableVirtual=0
-SingleWindow=0
-SingleWindowName=
-[Permissions]
-</code>
-===ultravncinstall.inf===
-<code>
-[Setup]
-Lang=de
-Dir=C:\Program Files\uvnc bvba\UltraVNC
-Group=UltraVNC
-NoIcons=0
-SetupType=server_silent
-Components=ultravnc_server
-Tasks=installservice,startservice
-</code>
-==== Steps ====
-  - install ultravnc server and config it like needed
-  - run the exe with the command "UltraVNC-101-Setup.exe /saveinf=c:\someconfigfile.inf" , this will save the main  config file to a path of your choosing.
-  - copy the ultravnc.ini of your installation path and edit it like needed
-  - step three
-  - ...
-[[nix|Change the following headlines to the names of your scripts]]
-==== myvbs.vbs ====
-<code vb>
-;this is my vbs-script...
-echo click on "edit this page" to see the complete source.
-</code>

OPSI DokuWiki

User Tools

Site Tools

Differences

Page Tools