Differences

This shows you the differences between two versions of the page.

--- userspace:wps-office [2019/05/20 12:42]
Thomas_H [setup.ins]
+++ userspace:wps-office [2021/08/23 08:37]
@@ Line 1: / Line 1: @@
-====== WPS-Office 2016 (former KingSoft Office) ======
-Tested with opsi 4.0.1\\
-requiredWinstVersion >= 4.8.6\\
-questions to:  //[[thomas.heinrich@polizei.berlin.de|Thomas_H]] 2019/05/15 12:45// \\
-Special thanks to Mossi, [[https://www.hofmann-robert.info/computer/2017/09/19/selbstextrahierendes-archiv-mit-7-zip-erstellen.html | Robert Hofmann]] \\
-The installation-files can be downloaded from: http://wdl1.pcfg.cache.wpscdn.com/wpsdl/wpsoffice/download/10.2.0.7646/WPSOffice_10.2.0.7646_Free.exe//
-Attention: The installation of WPS-Office is a little bit more tricky, but I try a step-by-step manual here to make it as easy as possible.
-==== Technical Informations ====
-WPS-Office (former KingSoft Office) will normally be installed in the Folder of the logged-in User. This results in a unavailability for other users, who might log in in the computer.  Of course this behaviour is not wanted, and can't be changed by some unattended switches during installation.
-So we have to change some things in the installation pack to force the setup to behave as we need it.
-Once done this change, the rest is easy and we can install the new file with opsi as well known.
-==== Packing a new setup.exe ====
-So, lets start to change the installation-file first.
-) download the WPS-Office (2016) from http://wdl1.pcfg.cache.wpscdn.com/wpsdl/wpsoffice/download/10.2.0.7646/WPSOffice_10.2.0.7646_Free.exe
-) download (if you don't use it already) 7Zip from https://www.7-zip.org/a/7z1900.exe (32Bit-Version) or https://www.7-zip.org/a/7z1900-x64.exe (64Bit-Version)
-) install 7Zip
-) open the WPSOffice_10.2.0.7646_Free.exe with 7Zip (yes, it's a ZIP-file) and extract it to a new folder (I name it now 'working-dir').
-        The contents of the new folder should look like this:
-        WPS-Office (this name is just an example)
-        ├ $_11_
-        └ $PLUGINSDIR
-) Now open the folder "$_11_" in the working-dir. There you will find a file named "$EXEFILE"
-) Rename "$EXEFILE" to "setup.exe"
-) Open "oem.ini" with your favourite editor. You will just see two lines. First line contains "[Setup]", second contains ";PipeNumber=100.103"
-) Add the following lines to the oem.ini (hint:if you only have a 32bit-system, so the installpath is 'c:\program files\WPS-Office'):
-<code>
-     Silent=1
-     LaunchWPS=0
-     LaunchCenter=0
-     CreateDesktopShortcut=1
-     ThanksInstallPage=false
-     INSTALLPATH=c:\Program Files (x86)\WPS-Office\
-</code>
-) Save the oem.ini-file to the "$_11_" - Folder
-) Leave $_11_-Folder to the parent folder (working-dir)
-) Create a new textfile in the working-dir named "config.txt"
-) edit "config.txt" with your favourite editor
-) insert the following lines into "config.txt":
-<code>
-     ;!@Install@!UTF-8!
-     RunProgram="$_11_\setup.exe"
-     GUIMode="2"
-     ;!@InstallEnd@!
-</code>
-) save the config.file in (ATTENTION! VERY IMPORTANT!!) UTF-8-Format
-) download 7zsd_tools from http://web.archive.org/web/20160401204446/http://7zsfx.info/files/7zsd_tools_150_2712.7z
-         --> (older versions for 32bit are avail at https://github.com/chrislake/7zsfxmm/wiki/Download)
-) open 7zsd_tools_150_2712.7z with 7Zip
-) copy 7zsd_LZMA2_x64.sfx to your working-dir (or if you have downloaded older versions the '7zsd_LZMA2.sfx')
-) Mark now the two folders "$_11_" and "$PLUGINSDIR" with a left mouseclick and choose with a right mouseclick from contextmenu the entry "7Zip" --> "Add to Archive"
-) Choose the following Parameters:
-         Archive format: 7z
-         Compression method: LZMA2 (this is why we have to add the 7zsd_LZMA2_x64.sfx to our working-dir)
-         The filename I have chosen was "WPSOffice_10.2.0.7646_Free.7z"
-) Click OK and let 7Zip create your archive.
-) Now the contents of your working-dir should look like this:
-        WPS-Office
-        ├ $_11_
-        ├ $PLUGINSDIR
-        ├ 7zsd_LZMA2_x64.sfx
-        ├ config.txt
-        └ WPSOffice_10.2.0.7646_Free.7z (or what name ever you gave the 7z-Archive)
-) Open a CMD and change into your working-dir
-) Enter the following command:
-<code>
-copy /b 7zsd_LZMA2_x64.sfx + config.txt + WPS-Office_10.2.0.7646_Free.7z WPS-Office_10.2.0.7646_Free.exe
-</code>
-Now you will have a new setup-file in your working-dir. Start it and check it out, if the installation runs fine and if the folder c:\program files [(x32)]\WPS-Office will be created and if you have the links on your desktop.
-HINT: if you don't like the icon shown in the new setup-file, it's possible to edit the "7zsd_LZMA2_x64.sfx" with a program named "Ressource Hacker". But I don't think, that this is important for an opsi-installation.
-If all is fine, we can start to create the opsi-files.
-Tree:\\
-├ wps-office.jpg\\
-├ WPS-Office_10.2.0.7646_Free.exe           'our self-created setup-file!\\
-├ setup.ins\\
-└ uninstall.ins\\
-==== setup.ins ====
-<code winst>
-; Copyright (c) uib gmbh (www.uib.de)
-; This sourcecode is owned by uib
-; and published under the Terms of the General Public License.
-; credits: http://www.opsi.org/credits/
-[Initial]
-SetLogLevel=9
-;  Log Errors in Logfile but don't abort:
-ExitOnError=false
-; Show syntax errors in the script:
-ScriptErrorMessages=on
-; Dont trace step by step through the script:
-TraceMode=off
-; let started programs run in front of the winst window
-StayOnTop=false
-[Actions]
-requiredWinstVersion >= "4.10.8.6"
-DefVar $LogDir$
-DefVar $ProductId$
-DefVar $Picture$
-DefVar $MinimumSpace$
-DefVar $InstallDir32$
-DefVar $InstallDir64$
-DefVar $ExitCode$
-DefVar $LicenseRequired$
-DefVar $LicenseKey$
-DefVar $LicensePool$
-DefVar $INST_SystemType$
-DefVar $INST_architecture$
-DefVar $Version$
-DefVar $Inst_Cmd$
-DefVar $Inst_Prg32$
-DefVar $Inst_Prg64$
-DefVar $Uninst_Cmd$
-DefVar $Uninst_Prg$
-Set $INST_SystemType$ = GetSystemType
-set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
-Set $LogDir$ = "%SystemDrive%\tmp"
-; ----------------------------------------------------------------
-; - Please edit the following values                             -
-; ----------------------------------------------------------------
-;$ProductId$ should be the name of the product in opsi
-; therefore please: only lower letters, no umlauts,
-; no white space use '-' as a seperator
-Set $ProductId$       = "WPS-Office"
-Set $Version$         = "10.2.0.7646"
-Set $MinimumSpace$    = "100 MB"
-Set $Picture$         = "wps-office.jpg"
-; the path were we find the product after the installation
-;Set $InstallDir32$      = "%ProgramFiles32Dir%\<programmordner>\"
-;Set $InstallDir64$      = "%ProgramFiles64Dir%\<programmordner>\"
-Set $LicenseRequired$ = "false"
-Set $LicensePool$     = "p_" + $ProductId$
-Set $Inst_Prg32$      = "WPSOffice_" + $Version$ + "_Free.exe"
-Set $Inst_Prg64$      = "WPSOffice_" + $Version$ + "_Free.exe"
-Set $Uninst_Prg$      = "/Kingsoft/WPS Office/$Version$/utility/uninst.exe"
-Set $Inst_Cmd$        = ' /S'
-Set $Uninst_Cmd$      = ' /S'
-; ----------------------------------------------------------------
-comment "Show product picture"
-ShowBitmap "%ScriptPath%\" + $Picture$ $ProductId$
-if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
-        LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
-        isFatalError
-        ; Stop process and set installation status to failed
-else
-        if FileExists("$InstallDir32$$Uninst_Prg")
-                comment "Start uninstall sub section"
-                Sub "%ScriptPath%\delsub.ins"
-        endif
-        if FileExists("$InstallDir64$$Uninst_Prg")
-                comment "Start uninstall sub section"
-                Sub "%ScriptPath%\delsub.ins"
-        endif
-        if $LicenseRequired$ = "true"
-                comment "Licensing required, reserve license and get license key"
-                Sub_get_licensekey
-        endif
-        comment "Installiere "+$ProductID$+"..."
-        if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
-                Message "Installiere " + $ProductId$+" (32 Bit)"
-                comment "Start setup program"
-                Winbatch_install_32
-                LinkFolder_install
-                Sub_check_exitcode
-        endif
-        if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
-                Message "Installiere " + $ProductId$+" (64 Bit)"
-                comment "Start setup program"
-                Winbatch_install_64
-                LinkFolder_install
-                Sub_check_exitcode
-        endif
-endif
-[Winbatch_install_32]
-%ScriptPath%\$Inst_Prg32$ $Inst_Cmd$
-[Winbatch_install_64]
-%ScriptPath%\$Inst_Prg64$ $Inst_Cmd$
-[LinkFolder_install]
-set_basefolder common_programs
-set_subfolder $ProductId$
-set_link
-name: "WPS-Office Writer"
-target: "%ProgramFiles32Dir%\WPS-Office\10.2.0.7646\office6\wps.exe"
-parameters:
-working_dir:"%ProgramFiles32Dir%\WPS-Office\"
-icon_file:"%ProgramFiles32Dir%\WPS-Office\10.2.0.7646\office6\wps.exe"
-end_link
-set_link
-name: "WPS-Office Spreadsheet"
-target: "%ProgramFiles32Dir%\WPS-Office\10.2.0.7646\office6\et.exe"
-parameters:
-working_dir:"%ProgramFiles32Dir%\WPS-Office\"
-icon_file:"%ProgramFiles32Dir%\WPS-Office\10.2.0.7646\office6\et.exe"
-end_link
-set_link
-name: "WPS-Office Presentations"
-target: "%ProgramFiles32Dir%\WPS-Office\10.2.0.7646\office6\wpp.exe"
-parameters:
-working_dir:"%ProgramFiles32Dir%\WPS-Office\"
-icon_file:"%ProgramFiles32Dir%\WPS-Office\10.2.0.7646\office6\wpp.exe"
-end_link
-[Sub_check_exitcode]
-comment "Test for installation success via exit code"
-set $ExitCode$ = getLastExitCode
-if ($ExitCode$ = "0")
-        comment "Looks good: setup program gives exitcode zero"
-else
-        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
-        if ($ExitCode$ = "1605")
-                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
-                comment "Uninstall of a not installed product failed - no problem"
-        else
-                if ($ExitCode$ = "1641")
-                        comment "looks good: setup program gives exitcode 1641"
-                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
-                else
-                        if ($ExitCode$ = "3010")
-                                comment "looks good: setup program gives exitcode 3010"
-                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
-                        else
-                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
-                                isFatalError
-                        endif
-                endif
-        endif
-endif
-</code>
-==== uninstall.ins ====
-<code-winst>
-[Initial]
-ExitOnError=true
-StayOnTop = true
-[Actions]
-requiredWinstVersion >= "4.10.5"
-DefVar $ProductId$
-DefVar $ExitCode$
-DefVar $NTVersioninfo$
-DefVar $uninstallstring$
-DefVar $Parameter$
-DefVar $Picture$
-DefVar $UninstPrg$
-DefVar $Version$
-SetLogLevel=6
-; ---------------Define some Variables here ----------------------
-Set $ProductId$       = "WPS-Office"
-Set $Picture$	      = "wps-office.jpg"
-Set $Version$	      = "10.2.0.7646"
-Set $UninstPrg$       = "%ProgramFiles64Dir%\$ProductID$\$Version$\utility\uninst.exe"
-Set $uninstallstring$ = "\$UninstPrg"
-Set $Parameter$	      = " /S"
-; ----------------------------------------------------------------
-ShowBitmap  "%ScriptPath%\" + $Picture$ $ProductId$
-Message "Deinstalliert  " + $ProductId$ + " ..."
-; 64 Bit OS
-if GetSystemType = 	"64 Bit System"
-	comment " 64 Bit System"
-	comment " $ProductID$ wird entfernt."
-	Sub_uninstall
-endif
-; 32 Bit OS
-if GetSystemType =  "x86 System"
-	comment " 32 Bit System"
-	comment " $ProductID$ wird entfernt"
-	Sub_uninstall
-endif
-[Winbatch_remove]
-"$UninstPrg$" $Parameter$
-[Sub_uninstall]
-Winbatch_remove
-Sub_check_exitcode
-comment "$ProductId$ deinstalliert"
-[Sub_check_exitcode]
-comment "Test for installation success via exit code"
-set $ExitCode$ = getLastExitCode
-; informations to exit codes see
-; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
-; http://msdn.microsoft.com/en-us/library/aa368542.aspx
-if ($ExitCode$ = "0")
-	comment "Looks good: setup program gives exitcode zero"
-else
-	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
-	if ($ExitCode$ = "1605")
-		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
-		comment "Uninstall of a not installed product failed - no problem"
-	else
-		if ($ExitCode$ = "1641")
-			comment "looks good: setup program gives exitcode 1641"
-			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
-		else
-			if ($ExitCode$ = "3010")
-				comment "looks good: setup program gives exitcode 3010"
-				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
-			else
-				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
-				isFatalError
-			endif
-		endif
-	endif
-endif
-</code>

OPSI DokuWiki

User Tools

Site Tools

Differences

Page Tools