Differences

This shows you the differences between two versions of the page.

--- winsttest [2011/09/21 13:32]
ueluekmen created
+++ — (current)
@@ Line 1: / Line 1: @@
-<code winst>
-; Copyright (c) uib gmbh (www.uib.de)
-; This sourcecode is owned by uib
-; and published under the Terms of the General Public License.
-; credits: http://www.opsi.org/credits/
-[Actions]
-requiredWinstVersion >= "4.10.8.6"
-DefVar $MsiId$
-DefVar $UninstallProgram$
-DefVar $LogDir$
-DefVar $ProductId$
-DefVar $MinimumSpace$
-DefVar $InstallDir$
-DefVar $ExitCode$
-DefVar $LicenseRequired$
-DefVar $LicenseKey$
-DefVar $LicensePool$
-Set $LogDir$ = "%SystemDrive%\tmp"
-; ----------------------------------------------------------------
-; - Please edit the following values                             -
-; ----------------------------------------------------------------
-;$ProductId$ should be the name of the product in opsi
-; therefore please: only lower letters, no umlauts,
-; no white space use '-' as a seperator
-Set $ProductId$       = "opsi-template"
-Set $MinimumSpace$    = "1 MB"
-; the path were we find the product after the installation
-Set $InstallDir$      = "%ProgramFiles32Dir%\<path to the product>"
-Set $LicenseRequired$ = "false"
-Set $LicensePool$     = "p_" + $ProductId$
-; ----------------------------------------------------------------
-if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
-        LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
-        isFatalError
-        ; Stop process and set installation status to failed
-else
-        comment "Show product picture"
-        ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
-        if FileExists("%ScriptPath%\delsub32.ins")
-                comment "Start uninstall sub section"
-                Sub "%ScriptPath%\delsub32.ins"
-        endif
-        Message "Installing " + $ProductId$ + " ..."
-        if $LicenseRequired$ = "true"
-                comment "Licensing required, reserve license and get license key"
-                Sub_get_licensekey
-        endif
-        comment "Start setup program"
-        Winbatch_install
-        Sub_check_exitcode
-        comment "Copy files"
-        Files_install /32Bit
-        comment "Patch Registry"
-        Registry_install /32Bit
-        comment "Create shortcuts"
-        LinkFolder_install
-        comment "Test for installation success"
-        ; Test if software marked as installed in registry
-        ; if (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}] DisplayName") = "")
-        ;       logError "Fatal: After Installation 32 bit [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}] not found"
-        ;       isFatalError
-        ; else
-        ;       comment "Successful Installation"
-        ; endif
-endif
-[Winbatch_install]
-; Choose one of the following examples as basis for your installation
-; You can use $LicenseKey$ var to pass a license key to the installer
-;
-; === Nullsoft Scriptable Install System ================================================================
-; "%ScriptPath%\Setup.exe" /S
-;
-; === MSI package =======================================================================================
-; You may use the parameter PIDKEY=$Licensekey$
-; msiexec /i "%ScriptPath%\some.msi" /l* "$LogDir$\$ProductId$.install_log.txt" /qb! ALLUSERS=2 REBOOT=ReallySuppress
-;
-; === InstallShield + MSI=====================================================================================
-; Attention: The path to the log file should not contain any whitespaces
-; "%ScriptPath%\setup.exe" /s /v" /l* $LogDir$\$ProductId$.install_log.txt /qb! ALLUSERS=2 REBOOT=ReallySuppress"
-; "%ScriptPath%\setup.exe" /s /v" /qb! ALLUSERS=2 REBOOT=ReallySuppress"
-;
-; === InstallShield =====================================================================================
-; Create setup.iss answer file by running: setup.exe /r /f1"c:\setup.iss"
-; "%ScriptPath%\setup.exe" /s /sms /f1"%ScriptPath%\setup.iss" /f2"$LogDir$\$ProductId$.install_log.txt"
-;
-; === Inno Setup ========================================================================================
-; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html
-; You may create setup answer file by: setup.exe /SAVEINF="filename"
-; You may use an answer file by the parameter /LOADINF="filename"
-; "%ScriptPath%\setup.exe" /sp- /silent /norestart
-[Files_install]
-; Example of recursively copying some files into the installation directory:
-;
-; copy -s "%ScriptPath%\files\*.*" "$InstallDir$"
-[Registry_install]
-; Example of setting some values of an registry key:
-;
-; openkey [HKEY_LOCAL_MACHINE\Software\$ProductId$]
-; set "name1" = "some string value"
-; set "name2" = REG_DWORD:0001
-; set "name3" = REG_BINARY:00 af 99 cd
-[LinkFolder_install]
-; Example of deleting a folder from AllUsers startmenu:
-;
-; set_basefolder common_programs
-; delete_subfolder $ProductId$
-;
-; Example of creating an shortcut to the installed exe in AllUsers startmenu:
-;
-; set_basefolder common_programs
-; set_subfolder $ProductId$
-;
-; set_link
-;       name: $ProductId$
-;       target: <path to the program>
-;       parameters:
-;       working_dir: $InstallDir$
-;       icon_file:
-;       icon_index:
-; end_link
-;
-; Example of creating an shortcut to the installed exe on AllUsers desktop:
-;
-; set_basefolder common_desktopdirectory
-; set_subfolder ""
-;
-; set_link
-;       name: $ProductId$
-;       target: <path to the program>
-;       parameters: <some_param>
-;       working_dir: $InstallDir$
-;       icon_file: <path to icon file>
-;       icon_index: 2
-; end_link
-[Sub_get_licensekey]
-if opsiLicenseManagementEnabled
-        comment "License management is enabled and will be used"
-        comment "Trying to get a license key"
-        Set $LicenseKey$ = demandLicenseKey ($LicensePool$)
-        ; If there is an assignment of exactly one licensepool to the product the following call is possible:
-        ; Set $LicenseKey$ = demandLicenseKey ("", $ProductId$)
-        ;
-        ; If there is an assignment of a license pool to a windows software id, it is possible to use:
-        ; DefVar $WindowsSoftwareId$
-        ; $WindowsSoftwareId$ = "..."
-        ; Set $LicenseKey$ = demandLicenseKey ("", "", $WindowsSoftwareId$)
-        DefVar $ServiceErrorClass$
-        set $ServiceErrorClass$ = getLastServiceErrorClass
-        comment "Error class: " + $ServiceErrorClass$
-        if $ServiceErrorClass$ = "None"
-                comment "Everything fine, we got the license key '" + $LicenseKey$ + "'"
-        else
-                if $ServiceErrorClass$ = "LicenseConfigurationError"
-                        LogError "Fatal: license configuration must be corrected"
-                        LogError getLastServiceErrorMessage
-                        isFatalError
-                else
-                        if $ServiceErrorClass$ = "LicenseMissingError"
-                                LogError "Fatal: required license is not supplied"
-                                isFatalError
-                        endif
-                endif
-        endif
-else
-        LogError "Fatal: license required, but license management not enabled"
-        isFatalError
-endif
-[Sub_check_exitcode]
-comment "Test for installation success via exit code"
-set $ExitCode$ = getLastExitCode
-; informations to exit codes see
-; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
-; http://msdn.microsoft.com/en-us/library/aa368542.aspx
-if ($ExitCode$ = "0")
-        comment "Looks good: setup program gives exitcode zero"
-else
-        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
-        if ($ExitCode$ = "1605")
-                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
-                comment "Uninstall of a not installed product failed - no problem"
-        else
-                if ($ExitCode$ = "1641")
-                        comment "looks good: setup program gives exitcode 1641"
-                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
-                else
-                        if ($ExitCode$ = "3010")
-                                comment "looks good: setup program gives exitcode 3010"
-                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
-                        else
-                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
-                                isFatalError
-                        endif
-                endif
-        endif
-endif
-</code>

OPSI DokuWiki

User Tools

Site Tools

Differences

Page Tools