Microsoft Office 2016 32-Bit und 64-Bit

Author Dominik Daehn, based on Office 2013 Code by Jens Eppler, based on Office 2010 Code by Soren Birk

Dieses Paket installiert Microsoft Office 2010, 2013 und 2016 in der 32-Bit und 64-Bit Version.

Das Skript beinhaltet Produkteigenschaften die zur Laufzeit in die config.xml geschrieben werden.

Das Setup installiert nur die Produkte die in der Produkteigenschaft “products“ angegeben sind.

Das Skript funktioniert für verschiedenen Versionen von Office. Voraussetzung ist die Anpassung der Variablen $OfficeId$ in den Dateien setup.opsicript und uninstall.opsicript. Welche Version von Office Sie einsetzen, können Sie anhand des Installationsmediums feststellen. Dort befindet sich ein Ordner mit dem Namen ”[productid].ww”. Außerdem befindet sich in diesem Ordner die Datei config.xml, in der die korrekte Produkt ID in der ersten Zeile steht <Setup Id =”…”>.

Ein Wechsel der installierten Office Architektur ist möglich indem das Paket nochmal auf setup gesetzt wird.

Falls auf einem Windows 32-Bit Client die Installation von Office 64-Bit ausgewählt wird, erfolgt automatisch die Installation von Office 32-Bit.

Anleitung:

Entpacken Sie die Installationsdateien von Office und kopieren Sie diese in den Ordner CLIENT_DATA\x64 und CLIENT_DATA\x86.
Anpassung der Dateien setup.opsicript und uninstall.opsicript. Hier müssen die Variablen $ProductId$, $ProductName$, $OfficeId$, $OfficeVersion$ editiert werden
- $OfficeId$
  - “ProPlus” für Office Professional Plus
  - “Standard” für Office Standard
  - …
- $OfficeVersion$
  - “Office16” für Office 2016
  - “Office15” für Office 2013
  - “Office14” für Office 2010
Anpassung der Datei OPSI\control

This package installs Microsoft Office 2010, 2013 and 2016 in the 32-bit and 64-bit version.

In my script I am using some ProductProperties wich are written into a config.xml which is used for the silent installation then.

The setup will install only the products wich are selected by the multivalue property “products”.

You might be able to also use this script with different versions of Office if you replace the variable $OfficeId$ in the files setup.opsicript and uninstall.opsicript. You can discover your version of Office when you look at the folders on your installmedia. There should be a folder named ”[productid].ww”. To verify this check inside this folder the file named “setup.xml”. The correct product id is shown there in the first lines <Setup Id =”…”>.

To change the installed Office architecture just set the package to setup again.

If the installation of Office 64-bit is selected on a Windows 32-bit client, the setup change to Office 32-bit automatically.

Instructions:

Extract the Office install media to CLIENT_DATA\x64 and CLIENT_DATA\x86
Adjustment of the files setup.opsicript und uninstall.opsicript. The variables $ProductId$, $ProductName$, $OfficeId$, $OfficeVersion$ must be edited.
- $OfficeId$
  - “ProPlus” for Office Professional Plus
  - “Standard” for Office Standard
  - …
- $OfficeVersion$
  - “Office16” for Office 2016
  - “Office15” for Office 2013
  - “Office14” for Office 2010
Use the control file as shown below for OPSI\control

Tested with:

OPSI 4.0.5.15
Winst 4.11.4.17
Windows 7, 64-Bit
Windows 7, 32-Bit
Windows 10, 64-Bit with revised install.opsiscript (below)

Tree:

CLIENT_DATA
  ├ config.xml
  ├ delsub32.opsiscript
  ├ delsub64.opsiscript
  ├ office2016.png
  ├ setup.opsiscript
  ├ uninstall.opsiscript
  ├ x64
    └ ...
  └ x86
    └ ...

setup.opsiscript

; Author Dominik Daehn, based on Office 2013 Code by Jens Eppler, based on Office 2010 Code by Soren Birk
 
[Actions]
requiredWinstVersion >= "4.11.3.5"
 
DefVar $LogDir$
DefVar $ProductId$ 
DefVar $ProductName$
DefVar $OfficeId$
DefVar $OfficeVersion$
 
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $InstallPfad$
DefVar $SystemType$
DefVar $OfficeArchitecture$
DefVar $LicenseKey$
DefVar $LicenseRequired$
DefVar $LicensePool$
DefVar $UninstallProgram$
DefVar $UninstCmd$
DefVar $ExitCode$
DefVar $exitcodeActivation$
DefVar $Config_Product$
DefVar $Config_Eula$
DefVar $Config_Log$
DefVar $Config_Reboot$
DefVar $UserName$
DefVar $CompanyName$
DefVar $ACCESSFiles$
DefVar $EXCELFiles$
DefVar $GrooveFiles2$
DefVar $OUTLOOKFiles$
DefVar $PPTFiles$
DefVar $PubPrimary$
DefVar $QueryFiles$
DefVar $WORDFiles$
DefVar $XDOCSFiles$
DefVar $LYNCFiles$
DefVar $ONENOTEFiles$
DefVar $VISIOVIEWERFiles$
DefStringList $Products$
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $LogDir$          		= "%SystemDrive%\tmp"
Set $ProductId$       		= "office2016"
Set $ProductName$     		= "Office 2016 Professional Plus"
Set $OfficeId$ 			= "ProPlus"
Set $OfficeVersion$ 		= "Office16"
 
Set $MinimumSpace$    		= "3 GB"
Set $InstallDir$ 		= "Microsoft Office"
Set $SystemType$ 		= GetSystemType
Set $OfficeArchitecture$	= GetProductProperty("architecture","")
Set $LicenseKey$      		= GetProductProperty("LicenseKey","")
;Variablen zum patchen der config.xml
Set $Config_Product$		= '<Configuration Product="' + $OfficeId$ + '">'
Set $Config_Eula$		= '<Display Level="basic" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" />'
Set $Config_Log$ 		= '<Logging Type="standard" Path="' + $LogDir$ + '" Template="' + $ProductName$ + '_Setup(*).txt" />'
Set $Config_Reboot$		= '<Setting Id="SETUP_REBOOT" Value="Never" />'
Set $UserName$        		= '<USERNAME Value="' + GetProductProperty("username", "Valued Customer") + '" />'
Set $CompanyName$     		= '<COMPANYNAME Value="' + GetProductProperty("companyname", "") + '" />'
Set $Products$        		= GetProductPropertyList("products","True")
Set $ACCESSFiles$     		= takeFirstStringContaining($Products$, "Access")
Set $EXCELFiles$      		= takeFirstStringContaining($Products$, "Excel")
Set $GrooveFiles2$    		= takeFirstStringContaining($Products$, "OneDrive")
Set $OUTLOOKFiles$    		= takeFirstStringContaining($Products$, "Outlook")
Set $PPTFiles$        		= takeFirstStringContaining($Products$, "PowerPoint")
Set $PubPrimary$      		= takeFirstStringContaining($Products$, "Publisher")
Set $WORDFiles$       		= takeFirstStringContaining($Products$, "Word")
Set $LYNCFiles$       		= takeFirstStringContaining($Products$, "Skype")
Set $ONENOTEFiles$    		= takeFirstStringContaining($Products$, "OneNote")
Set $VISIOVIEWERFiles$  	= takeFirstStringContaining($Products$, "VisioViewer")
 
; ----------------------------------------------------------------
 
; The old  comparison [if GetMsVersionInfo < "6"] doesn't work with Windows 10, as the GetMSVersionInfo returns "10.0", which the comparison can't handle properly 
if CompareDotSeparatedNumbers(GetMsVersionInfo,"6.0") < "0"
	LogError "This is for NT 6 (Vista) and above"
	isFatalError
else
	;Die oben ausgelesenen Variablen als PropertyListOption werden zu Strings, die in die config.xml ein- und dem Installer übergeben werden 
	;Access installieren oder nicht
	if not ($ACCESSFiles$ = "")
		Set $ACCESSFiles$  = '<OptionState Id="ACCESSFiles" State="local" Children="force" />'
	else
		Set $ACCESSFiles$  = '<OptionState Id="ACCESSFiles" State="absent" Children="force" />'	
	endif
	;Excel installieren oder nicht (inkl. Datenbankanbindung)
	if not ($EXCELFiles$ = "")
		Set $QueryFiles$  = '<OptionState Id="QueryFiles" State="local" Children="force" />'
		Set $EXCELFiles$  = '<OptionState Id="EXCELFiles" State="local" Children="force" />'
	else
		Set $QueryFiles$  = '<OptionState Id="QueryFiles" State="absent" Children="force" />'	
		Set $EXCELFiles$  = '<OptionState Id="EXCELFiles" State="absent" Children="force" />'
	endif
	;OneDrive installieren oder nicht
	if not ($GrooveFiles2$ = "")
		Set $GrooveFiles2$  = '<OptionState Id="GrooveFiles2" State="local" Children="force" />'
	else
		Set $GrooveFiles2$  = '<OptionState Id="GrooveFiles2" State="absent" Children="force" />'	
	endif
	;Outlook installieren oder nicht
	if not ($OUTLOOKFiles$ = "")
		Set $OUTLOOKFiles$  = '<OptionState Id="OUTLOOKFiles" State="local" Children="force" />'
	else
		Set $OUTLOOKFiles$  = '<OptionState Id="OUTLOOKFiles" State="absent" Children="force" />'	
	endif
	;Powerpoint installieren oder nicht
	if not ($PPTFiles$ = "")
		Set $PPTFiles$  = '<OptionState Id="PPTFiles" State="local" Children="force" />'
	else
		Set $PPTFiles$  = '<OptionState Id="PPTFiles" State="absent" Children="force" />'	
	endif
	;Publisher installieren oder nicht
	if not ($PubPrimary$ = "")
		Set $PubPrimary$  = '<OptionState Id="PubPrimary" State="local" Children="force" />'
	else
		Set $PubPrimary$  = '<OptionState Id="PubPrimary" State="absent" Children="force" />'	
	endif
	;Word installieren oder nicht
	if not ($WORDFiles$ = "")
		Set $WORDFiles$  = '<OptionState Id="WORDFiles" State="local" Children="force" />'
	else
		Set $WORDFiles$  = '<OptionState Id="WORDFiles" State="absent" Children="force" />'	
	endif
	;Skype installieren oder nicht
	if not ($LYNCFiles$ = "")
		Set $LYNCFiles$  = '<OptionState Id="LyncCoreFiles" State="local" Children="force" />'
	else
		Set $LYNCFiles$  = '<OptionState Id="LyncCoreFiles" State="absent" Children="force" />'	
	endif
	;OneNote installieren oder nicht
	if not ($ONENOTEFiles$ = "")
		Set $ONENOTEFiles$  = '<OptionState Id="OneNoteFiles" State="local" Children="force" />'
	else
		Set $ONENOTEFiles$  = '<OptionState Id="OneNoteFiles" State="absent" Children="force" />'	
	endif
	;VisioViewer installieren oder nicht
	if not ($VISIOVIEWERFiles$ = "")
		Set $VISIOVIEWERFiles$  = '<OptionState Id="VisioPreviewerFiles" State="local" Children="force" />'
	else
		Set $VISIOVIEWERFiles$  = '<OptionState Id="VisioPreviewerFiles" State="absent" Children="force" />'	
	endif
 
	if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
		LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on dirve %SystemDrive% is needed for " + $ProductId$
		isFatalError "Not enough space"
	else
		if ($OfficeArchitecture$ = "x64") AND ($SystemType$ = "x86 System")
			set $OfficeArchitecture$ = "x86"
			comment "change Office architecture to Office x86"
		endif	
		comment "Display product logo"
		ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductName$
 
		comment "Copying empty config.xml to $LogDir$"
		Files_copy_patchtextfile
 
		comment "Patching config.xml"
		PatchTextFile_config_xml $LogDir$ + "\config.xml"
 
		if FileExists("%ScriptPath%\delsub32.opsiscript")
			comment "Start uninstall sub section delsub32"
			Sub "%ScriptPath%\delsub32.opsiscript"
		endif
 
		if FileExists("%ScriptPath%\delsub64.opsiscript")
			comment "Start uninstall sub section delsub64"
			Sub "%ScriptPath%\delsub64.opsiscript"
		endif
 
		Message "Installing " + $ProductId$ + " ..." 
 
		if ($OfficeArchitecture$ = "x86") AND ($SystemType$ = "64 Bit System")
			set $InstallPfad$ = "%ProgramFiles32Dir%"
		else
			set $InstallPfad$ = "%ProgramFiles64Dir%"
		endif
 
		comment "Start setup program"
		ChangeDirectory "%SCRIPTPATH%"
		Winbatch_install
		Sub_check_exitcode
 
		if not ($LicenseKey$ = "")
			comment "Set License Key"
			DosInAnIcon_set_key
			set $exitcodeActivation$ = getLastExitCode
				if not ($exitcodeActivation$ = "0")
					LogError "Exitcode unequal zero: "+$exitcodeActivation$+" Activation seems to be failed !"
					isFatalError "activation failed"
				else
					comment "Activation seems to be successful: exit code = 0"
				endif
		endif
	endif
endif
 
[Files_copy_patchtextfile]
copy "%ScriptPath%\config.xml" $LogDir$
 
[PatchTextFile_config_xml]
FindLine "</Configuration>"
InsertLine '$LYNCFiles$'
InsertLine '$ONENOTEFiles$'
InsertLine '$VISIOVIEWERFiles$'
InsertLine '$WORDFiles$'
InsertLine '$QueryFiles$'
InsertLine '$PubPrimary$'
InsertLine '$PPTFiles$'
InsertLine '$OUTLOOKFiles$'
InsertLine '$GrooveFiles2$'
InsertLine '$EXCELFiles$'
InsertLine '$ACCESSFiles$'
InsertLine '$CompanyName$'
InsertLine '$UserName$'
InsertLine '$Config_Reboot$'
InsertLine '$Config_Log$'
InsertLine '$Config_Eula$'
InsertLine '$Config_Product$'
 
[Winbatch_install]
"%ScriptPath%\$OfficeArchitecture$\setup.exe" /config "$LogDir$\config.xml"
 
[DosInAnIcon_set_key]	
cscript //b "$InstallPfad$\$InstallDir$\$OfficeVersion$\ospp.vbs" /inpkey:$LicenseKey$
exit %ERRORLEVEL%
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

uninstall.opsiscript

; Author Dominik Daehn, based on Office 2013 Code by Jens Eppler, based on Office 2010 Code by Soren Birk
 
[Actions]
requiredWinstVersion >= "4.11.2.6"
 
DefVar $LogDir$
DefVar $ProductId$
DefVar $ProductName$
DefVar $OfficeId$
DefVar $OfficeVersion$
 
DefVar $InstallDir$
DefVar $SystemType$
DefVar $LicenseRequired$
DefVar $LicensePool$
DefVar $UninstallProgram$
DefVar $UninstCmd$
DefVar $ExitCode$
DefVar $Config_Product$
DefVar $Config_Eula$
DefVar $Config_Log$
DefVar $Config_Reboot$
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $LogDir$ 			= "%SystemDrive%\tmp"
Set $ProductId$       		= "office2016"
Set $ProductName$     		= "Office 2016 Professional Plus"
Set $OfficeId$ 			= "ProPlus"
Set $OfficeVersion$ 		= "Office16"
 
Set $InstallDir$ 		= "Microsoft Office"
Set $SystemType$ 		= GetSystemType
Set $Config_Product$		= '<Configuration Product="' + $OfficeId$ + '">'
Set $Config_Eula$		= '<Display Level="basic" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" />'
Set $Config_Log$ 		= '<Logging Type="standard" Path="' + $LogDir$ + '" Template="' + $ProductName$ + '_Uninstall(*).txt" />'
Set $Config_Reboot$		= '<Setting Id="SETUP_REBOOT" Value="Never" />'
; ----------------------------------------------------------------
 
comment "Display product logo"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductName$
 
Message "Uninstalling " + $ProductId$ + " ..."
 
comment "Copying empty config.xml to $LogDir$"
Files_copy_patchtextfile
 
comment "Patching config.xml"
PatchTextFile_config_xml $LogDir$ + "\config.xml"
 
if FileExists("%ScriptPath%\delsub32.opsiscript")
	comment "Start uninstall sub section delsub32"
	Sub "%ScriptPath%\delsub32.opsiscript"
endif
 
if FileExists("%ScriptPath%\delsub64.opsiscript")
	comment "Start uninstall sub section delsub64"
	Sub "%ScriptPath%\delsub64.opsiscript"
endif
 
[Files_copy_patchtextfile]
copy "%ScriptPath%\config.xml" $LogDir$
 
[PatchTextFile_config_xml]
FindLine "</Configuration>"
InsertLine '$Config_Reboot$'
InsertLine '$Config_Log$'
InsertLine '$Config_Eula$'
InsertLine '$Config_Product$'

delsub32.opsiscript

; Author Dominik Daehn, based on Office 2013 Code by Jens Eppler, based on Office 2010 Code by Soren Birk
 
Set $UninstallProgram$ = "%ScriptPath%\x86\setup.exe"
Set $UninstCmd$ = "/uninstall " + $OfficeId$ + " /config " + $LogDir$ + "\config.xml"
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists("%ProgramFiles32Dir%\" + $InstallDir$ + "\" + $OfficeVersion$ + "\ospp.vbs")
	comment "The program seems to be installed, starting the uninstallation."
	Winbatch_uninstall
	sub_check_exitcode
endif
 
[Winbatch_uninstall]
$UninstallProgram$ $UninstCmd$
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

delsub64.opsiscript

; Author Dominik Daehn, based on Office 2013 Code by Jens Eppler, based on Office 2010 Code by Soren Birk
 
Set $UninstallProgram$ = "%ScriptPath%\x64\setup.exe"
Set $UninstCmd$ = "/uninstall " + $OfficeId$ + " /config " + $LogDir$ + "\config.xml"
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists("%ProgramFiles64Dir%\" + $InstallDir$ + "\" + $OfficeVersion$ + "\ospp.vbs") AND ($SystemType$ = "64 Bit System")
	comment "The program seems to be installed, starting the uninstallation."
	Winbatch_uninstall
	sub_check_exitcode
endif
 
[Winbatch_uninstall]
$UninstallProgram$ $UninstCmd$
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

config.xml

</Configuration>

control

[Package]
version: 1
depends: 
incremental: False

[Product]
type: localboot
id: office2016
name: Office 2016
description: Office 2016
advice: 
version: 1.0
priority: 0
licenseRequired: True
productClasses: 
setupScript: setup.opsiscript
uninstallScript: uninstall.opsiscript
updateScript: 
alwaysScript: 
onceScript: 
customScript: 
userLoginScript: 

[ProductProperty]
type: unicode
name: architecture
multivalue: False
editable: False
description: Architektur der Office Installation
values: ["x64", "x86"]
default: ["x64"]

[ProductProperty]
type: unicode
name: username
multivalue: False
editable: True
description: Benutzername
values: [""]
default: [""]

[ProductProperty]
type: unicode
name: companyname
multivalue: False
editable: True
description: Firmenname
values: [""]
default: [""]

[ProductProperty]
type: unicode
name: licensekey
multivalue: False
editable: True
description: Lizenzkey fuer die Installation
values: [""]
default: [""]

[ProductProperty]
type: unicode
name: products
multivalue: True
editable: False
description: Installationsoptionen, was wird installiert
values: ["Access", "Excel", "OneDrive", "OneNote", "Outlook", "PowerPoint", "Publisher", "Skype", "VisioViewer", "Word"]
default: ["Access", "Excel", "OneNote", "PowerPoint", "Publisher", "VisioViewer", "Word"]

[Changelog]
office-2016 (1.0-1) stable; urgency=low

  * Initial package

 -- Dominik Daehn <...>  Tue, 5 Jan 2016

OPSI DokuWiki

Table of Contents

Microsoft Office 2016 32-Bit und 64-Bit

setup.opsiscript

uninstall.opsiscript

delsub32.opsiscript

delsub64.opsiscript

config.xml

control

OPSI DokuWiki

User Tools

Site Tools

Table of Contents

Microsoft Office 2016 32-Bit und 64-Bit

setup.opsiscript

uninstall.opsiscript

delsub32.opsiscript

delsub64.opsiscript

config.xml

control

Page Tools