User Tools

Site Tools


userspace:netfx_4.0

.NetFX 4.0

Versions
By Thomas_H 2011/11/09 08:56
By Thomas_H 2011/11/16 13:25 Thanks to Karsten K. for informations about incompleted deinstallation.

Tested with opsi 4.0.1
requiredWinstVersion >= 4.10.8.6 By Thomas_H 2011/11/09 08:56
The installation-files can be downloaded at http://www.microsoft.com/downloads/de-de/details.aspx?FamilyID=0a391abd-25c1-4fc0-919f-b21f31ab88b7

Special thanks to: joerg.ludwig for his code, to be found in the Forum which solved the problem of a failed installation when re-installing the OS on a PC.

Tree:
AutoIt3.exe
delsub.ins
dotNetFX.jpg
dotNetFx40_Full_x86_x64.exe
setup.ins
uninstall.ins

setup.ins

[Initial]
LogLevel=9
;  Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; let started programs run in front of the winst window
StayOnTop=false
 
 
[Actions]
requiredWinstVersion >= "4.10.8.6"
 
DefVar $UninstallProgram32$
DefVar $UninstallProgram64$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir32$
DefVar $InstallDir64$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $Version$
DefVar $Inst_Cmd32$
DefVar $Inst_Cmd64$
DefVar $Uninst_Cmd32$
DefVar $Uninst_Cmd64$
DefVar $Inst_Prg$
DefVar $Uninst_Prg$
DefVar $LogDir$
DefVar $opsiadminuser$
DefVar $opsiadminpwd$
 
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
 
 
Set $LogDir$ = "%SystemDrive%\tmp"
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
Set $ProductId$       = "dotNetFX"
Set $Version$         = "4.0"
Set $MinimumSpace$    = "55 MB"
; the path were we find the product after the installation
Set $InstallDir32$    = "%Systemroot%\Microsoft.NET\Framework\v4.0.30319\SetupCache\Extended\"
Set $InstallDir64$    = "%Systemroot%\Microsoft.NET\Framework64\v4.0.30319\SetupCache\Extended\"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
Set $Inst_Prg$        = "dotNetFx40_Full_x86_x64.exe"
Set $Inst_Cmd32$      = '/passive /norestart'
Set $Inst_Cmd64$      = 'NOT NEEDED HERE!'
Set $Uninst_Cmd32$    = '/uninstall /x86 /x64 /ia64 /parameterfolder Extended /passive /norestart'
Set $Uninst_Cmd64$    = '/uninstall /x86 /x64 /ia64 /parameterfolder Extended /passive /norestart'
Set $Uninst_Prg$        = "setup.exe"
Set $opsiadminuser$ = "opsiSetupAdmin"
Set $opsiadminpwd$ = randomstr
; ----------------------------------------------------------------
 
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
        LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
        isFatalError
        ; Stop process and set installation status to failed
else
        comment "Show product picture"
        ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$+" "+$Version$
 
        if FileExists("%ScriptPath%\delsub.ins")
                comment "Start uninstall sub section"
                Sub "%ScriptPath%\delsub.ins"
        endif
 
        if $LicenseRequired$ = "true"
                comment "Licensing required, reserve license and get license key"
                Sub_get_licensekey
        endif
 
        comment "installing"
 
        Message "Copying Setup to Disk..."
        FilesCopy
        Message "Installing " + $ProductId$ + " 32 Bit..."
        comment "Start setup program"
        DosBatchUserdel
        DosBatchUseradd
        DefStringList $res$
        Set $res$ = getOutStreamFromSection("ExecWithSetup '%ScriptPath%\AutoIt3.exe' WINST")
        if count($res$) = "1"
            DefVar $e$
            Set $e$ = takeString(0, $res$)
            Comment "setup exit code: " + $e$
            if ($e$ = "1614") or ($e$ = "3010")
                ExitWindows /Reboot
            endif
        else
            LogError "Fatal: Setup did not return exit code!"
            IsFatalError
        endif
        DosBatchUserdel
        ; Ok, let's check, if .Net Framework was installed...
        if not(FileExists("%systemroot%\Microsoft.NET\Framework\v4.0.30319"))
            LogError "Fatal: Framework not found!"
            IsFatalError
        endif
        FilesDelete
        Sub_check_exitcode
 
endif
 
[FilesCopy]
copy "%ScriptPath%\dotNetFx40_Full_x86_x64.exe" "$LogDir$"
 
[DosBatchUseradd]
net user "$opsiadminuser$" "$opsiadminpwd$" /add
net localgroup Administratoren /add "$opsiadminuser$"
 
[DosBatchUserdel]
net user "$opsiadminuser$" /delete
rmdir /s /q "%ProfileDir%\$opsiadminuser$"
 
[ExecWithSetup]
; http://msdn.microsoft.com/library/ee942965%28v=VS.100%29.aspx
; return exit code via stdout as winst cannot read exit codes from ExecWith
$ExitCode = RunAsWait("$opsiadminuser$", @ComputerName, "$opsiadminpwd$", 1, _
  '"$LogDir$\$Inst_Prg$" $Inst_Cmd32$')
if not @error then
  ConsoleWrite($exitcode)
endif
 
[FilesDelete]
delete "$LogDir$/$Inst_Prg$"
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
        comment "Looks good: setup program gives exitcode zero"
else
        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
        if ($ExitCode$ = "1605")
                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
                comment "Uninstall of a not installed product failed - no problem"
        else
                if ($ExitCode$ = "1641")
                        comment "looks good: setup program gives exitcode 1641"
                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
                else
                        if ($ExitCode$ = "3010")
                                comment "looks good: setup program gives exitcode 3010"
                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
                        else
                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
                                isFatalError
                        endif
                endif
        endif
endif

uninstall.ins

[Initial]
LogLevel=9
;  Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; let started programs run in front of the winst window
StayOnTop=false
 
[Actions]
requiredWinstVersion >= "4.10.8.6"
 
DefVar $UninstallProgram32$
DefVar $UninstallProgram64$
DefVar $UninstallProgram32_2$
DefVar $UninstallProgram64_2$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir32$
DefVar $InstallDir32_2$
DefVar $InstallDir64$
DefVar $InstallDir64_2$
DefVar $LicenseRequired$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $Uninst_Cmd32$
DefVar $Uninst_Cmd32_2$
DefVar $Uninst_Cmd64$
DefVar $Uninst_Cmd64_2$
DefVar $Uninst_Prg$
 
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
 
 
Set $LogDir$ = "%SystemDrive%\tmp"
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "dotNETFx"
Set $InstallDir32$    = "%Systemroot%\Microsoft.NET\Framework\v4.0.30319\SetupCache\Extended\"
Set $InstallDir32_2$  = "%Systemroot%\Microsoft.NET\Framework\v4.0.30319\SetupCache\Client\"
Set $InstallDir64$    = "%Systemroot%\Microsoft.NET\Framework64\v4.0.30319\SetupCache\Extended\"
Set $InstallDir64_2$  = "%Systemroot%\Microsoft.NET\Framework\v4.0.30319\SetupCache\Client\"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
Set $Uninst_Prg$        = "setup.exe"
Set $Uninst_Cmd32$        = '/uninstall /x86 /x64 /ia64 /parameterfolder Extended /passive /norestart'
Set $Uninst_Cmd32_2$      = '/uninstall /x86 /x64 /parameterfolder Client /passive /norestart'
Set $Uninst_Cmd64$        = '/uninstall /x86 /x64 /ia64 /parameterfolder Extended /passive /norestart'
Set $Uninst_Cmd64_2$      = '/uninstall /x86 /x64 /parameterfolder Client /passive /norestart'
; ----------------------------------------------------------------
 
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".jpg" $ProductId$
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists("%ScriptPath%\delsub.ins")
        comment "Start uninstall sub section"
        Sub "%ScriptPath%\delsub.ins"
endif
 
if $LicenseRequired$ = "true"
        comment "Licensing required, free license used"
        Sub_free_license
endif
 
ExitWindows /Reboot
 
[Sub_free_license]
comment "License management is enabled and will be used"
 
comment "Trying to free license used for the product"
DefVar $result$
Set $result$ = FreeLicense($LicensePool$)
; If there is an assignment of a license pool to the product, it is possible to use
; Set $result$ = FreeLicense("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)

delsub.ins

Set $UninstallProgram32$ = $InstallDir32$+"\"+$Uninst_Prg$
Set $UninstallProgram64$ = $InstallDir64$+"\"+$Uninst_Prg$
 
Set $UninstallProgram32_2$ = $InstallDir32_2$+"\"+$Uninst_Prg$
Set $UninstallProgram64_2$ = $InstallDir64_2$+"\"+$Uninst_Prg$
 
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
        Message "Uninstalling " + $ProductId$ + " 32 Bit..."
 
        if FileExists($UninstallProgram32$)
                comment "Uninstall program found, starting uninstall"
                Winbatch_uninstall_32
                comment "Removing "+$InstallDir32$
                Files_uninstall_32
                sub_check_exitcode
        endif
endif
 
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
        Message "Uninstalling " + $ProductId$ + " 64 Bit..."
 
        if FileExists($UninstallProgram64$)
                comment "Uninstall program found, starting uninstall"
                Winbatch_uninstall_64
                comment "Removing "+$InstallDir64$
                Files_uninstall_64
                sub_check_exitcode
        endif
endif
 
[Winbatch_uninstall_32]
$UninstallProgram32$ $Uninst_Cmd32$
$UninstallProgram32_2$ $Uninst_Cmd32_2$
 
[Winbatch_uninstall_64]
$UninstallProgram64$ $Uninst_Cmd64$
$UninstallProgram64_2$ $Uninst_Cmd64_2$
 
[Files_uninstall_32]
; Example for recursively deleting the installation directory (don't forget the trailing backslash):
;
delete -sf "$InstallDir32$\"
 
[Files_uninstall_64]
; Example for recursively deleting the installation directory (don't forget the trailing backslash):
;
delete -sf "$InstallDir64$\"
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
        comment "Looks good: setup program gives exitcode zero"
else
        comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
        if ($ExitCode$ = "1605")
                comment "ERROR_UNKNOWN_PRODUCT  1605    This action is only valid for products that are currently installed."
                comment "Uninstall of a not installed product failed - no problem"
        else
                if ($ExitCode$ = "1641")
                        comment "looks good: setup program gives exitcode 1641"
                        comment "ERROR_SUCCESS_REBOOT_INITIATED 1641    The installer has initiated a restart. This message is indicative of a success."
                else
                        if ($ExitCode$ = "3010")
                                comment "looks good: setup program gives exitcode 3010"
                                comment "ERROR_SUCCESS_REBOOT_REQUIRED  3010    A restart is required to complete the install. This message is indicative of a success."
                        else
                                logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
                                isFatalError
                        endif
                endif
        endif
endif
userspace/netfx_4.0.txt · Last modified: 2021/08/23 08:37 (external edit)