userspace:origin
Table of Contents
Origin Ver. 9.1 MSI Installer
Files can be downloaded at Download here: Download
By — tobias 2013/12/13 09:08
Tree:
├── CLIENT_DATA │ ├── additional │ │ ├── additional_actions.opsiinc │ │ ├── additional_sections.opsiinc │ ├── config.opsiinc │ ├── delsub.ins │ ├── files │ │ ├── MSI │ │ │ ├── Origin91_x64 │ │ │ │ └── setup.msi │ │ │ ├── Origin91_x86 │ │ │ │ └── setup.msi │ │ │ ├── vcreddist_x64_2008_x64 │ │ │ │ ├── vc_red.cab │ │ │ │ └── vc_red.msi │ │ │ ├── vcredist_x64-2012_x64 │ │ │ │ ├── vcRuntimeAdditional_amd64 │ │ │ │ │ ├── cab1.cab │ │ │ │ │ └── vc_runtimeAdditional_x64.msi │ │ │ │ └── vcRuntimeMinimum_amd64 │ │ │ │ ├── cab1.cab │ │ │ │ └── vc_runtimeMinimum_x64.msi │ │ │ ├── vcredist_x86-2008_x86_x64 │ │ │ │ ├── vc_red.cab │ │ │ │ └── vc_red.msi │ │ │ └── vcredist_x86-2012_x86_x64 │ │ │ ├── vcRuntimeAdditional_x86 │ │ │ │ ├── cab1.cab │ │ │ │ └── vc_runtimeAdditional_x86.msi │ │ │ └── vcRuntimeMinimum_x86 │ │ │ ├── cab1.cab │ │ │ └── vc_runtimeMinimum_x86.msi │ │ └── use_server.lic │ ├── origin9.1.png │ ├── setup.ins │ ├── uninstall.ins │ └── vars.opsiinc ├── OPSI │ ├── control │ ├── postinst │ └── preinst
What you need
- the MSI Installer from Additive (64bit + 32bit)
- the MSI files from VISUAL C++ 2012 REDISTRIBUTABLE (64bit + 32bit) How to get the MSI Installer:
- the MSI files from VISUAL C++ 2008 REDISTRIBUTABLE (64bit + 32bit)
additional_actions.opsiinc
; Insert additional Sektions (only the section name, not the section) if ($INST_SystemType$ = "x86 System") Message "Lizensiere Origin 9.1" files_lic_x86 Message "Installiere benoetigte Laufzeitumgebungen" winbatch_vcredist_x86 else Message "Lizensiere Origin 9.1" files_lic_x64 Message "Installiere benoetigte Laufzeitumgebungen" winbatch_vcredist_x64 endif
additional_sections.opsiinc
; Insert the section, not the section name !!! [files_lic_x86] copy -s "%ScriptPath%\files\use_server.lic" "%ProgramFilesDir%\Originlab\Origin 9.1\License" [files_lic_x64] copy -s "%ScriptPath%\files\use_server.lic" "%ProgramFiles64Dir%\Originlab\Origin 9.1\License" [winbatch_vcredist_x86] msiexec -i %scriptpath%\files\MSI\vcredist_x86-2008_x86_x64\vc_red.msi -passive msiexec -i %scriptpath%\files\MSI\vcredist_x86-2012_x86_x64\vcRuntimeMinimum_x86\vc_runtimeMinimum_x86.msi -passive ADDEPLOY=1 msiexec -i %scriptpath%\files\MSI\vcredist_x86-2012_x86_x64\vcRuntimeAdditional_x86\vc_runtimeAdditional_x86.msi -passive ADDEPLOY=1 [winbatch_vcredist_x64] msiexec -i %scriptpath%\files\MSI\vcreddist_x64_2008_x64\vc_red.msi -passive msiexec -i %scriptpath%\files\MSI\vcredist_x86-2008_x86_x64\vc_red.msi -passive msiexec -i %scriptpath%\files\MSI\vcredist_x64-2012_x64\vcRuntimeMinimum_amd64\vc_runtimeMinimum_x64.msi -passive ADDEPLOY=1 msiexec -i %scriptpath%\files\MSI\vcredist_x64-2012_x64\vcRuntimeAdditional_amd64\vc_runtimeAdditional_x64.msi -passive ADDEPLOY=1 msiexec -i %scriptpath%\files\MSI\vcredist_x86-2012_x86_x64\vcRuntimeMinimum_x86\vc_runtimeMinimum_x86.msi -passive ADDEPLOY=1 msiexec -i %scriptpath%\files\MSI\vcredist_x86-2012_x86_x64\vcRuntimeAdditional_x86\vc_runtimeAdditional_x86.msi -passive ADDEPLOY=1
config.opsiinc
; ----------------------------------------------------------------
; - edit the following values -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
Set $ProductId$ = "Origin9.1"
Set $MinimumSpace$ = "500 MB"
set $setupcommand32$ = "msiexec /i %ScriptPath%\files\MSI\Origin91_x86\setup.msi /passive ALLUSERS=2 REBOOT=ReallySuppress PIDKEY=SF8T5-3089-7902407"
set $setupcommand64$ = "msiexec /i %ScriptPath%\files\MSI\Origin91_x64\setup.msi /passive ALLUSERS=2 REBOOT=ReallySuppress PIDKEY=SF8T5-3089-7902407"
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; ----------------------------------------------------------------
; - Currently installing MSIs
; ----------------------------------------------------------------
set $installed_MSI_32$ = createStringList (' ')
set $installed_MSI_64$ = createStringList ('{3C28BFD4-90C7-3138-87EF-418DC16E9598}','{5AF4E09F-5C9B-3AAF-B731-544D3DC821DD}','{5FCE6D76-F5DC-37AB-B2B8-22AB8CEDB1D4}')
set $installed_MSI_Both$ = createStringList ('{912C907D-E18C-4560-859B-2B1EA969BAB5}','{E824E81C-80A4-3DFF-B5F9-4842A9FF5F7F}','{6C772996-BFF3-3C8C-860B-B3D48FF05D65}','{9BE518E6-ECC6-35A9-88E4-87755C07200F}')
; ----------------------------------------------------------------
; - MSIID MAPP / Aktuelle MSIIDs
; ----------------------------------------------------------------
;32
; -
;64
;Origin91_x64 - {912C907D-E18C-4560-859B-2B1EA969BAB5}
;vcredist_x64-2012 Additional - {3C28BFD4-90C7-3138-87EF-418DC16E9598}
;vcredist_x64-2012 Minimum - {5AF4E09F-5C9B-3AAF-B731-544D3DC821DD}
;vcredist_x64_2008 - {5FCE6D76-F5DC-37AB-B2B8-22AB8CEDB1D4}
;Both
;Origin91_x86 - {912C907D-E18C-4560-859B-2B1EA969BAB5}
;vcredist_x86-2012 Additional - {6C772996-BFF3-3C8C-860B-B3D48FF05D65}
;vcredist_x86-2012 Minimum - {E824E81C-80A4-3DFF-B5F9-4842A9FF5F7F}
;vcredist_x86-2008 - {9BE518E6-ECC6-35A9-88E4-87755C07200F}
; ----------------------------------------------------------------
; - MSIs from outdated packages
; ----------------------------------------------------------------
set $MSI_32$ = createStringList ('{9DE4251D-D6A0-445B-A006-42F20D46CB62}')
set $MSI_64$ = createStringList (' ')
set $MSI_Both$ = createStringList (' ')
; ----------------------------------------------------------------
; - Additional Configuration
; ----------------------------------------------------------------
set $checktask$ = "false"
set $killtask$ = "false"
set $SearchProcess$ = createStringList ('cmd.exe')
delsub.ins
; ----------------------------------------------------------------
; - 32Bit -
; ----------------------------------------------------------------
if ($INST_SystemType$ = "x86 System")
Message "Uninstalling " + $ProductId$ + " 32 Bit..."
if not (GetRegistryStringValue32("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $ID$ + "] DisplayName") = "")
comment "MSI id " + $ID$ + " found in registry, starting msiexec to uninstall"
Winbatch_uninstall_msi
sub_check_exitcode
endif
endif
; ----------------------------------------------------------------
; - 64Bit -
; ----------------------------------------------------------------
if ($INST_SystemType$ = "64 Bit System")
Message "Uninstalling " + $ProductId$ + " 64 Bit..."
if not (GetRegistryStringValue64("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $ID$ + "] DisplayName") = "")
comment "MSI id " + $ID$ + " found in registry, starting msiexec to uninstall"
Winbatch_uninstall_msi
sub_check_exitcode
endif
endif
; ----------------------------------------------------------------
; - Both -
; ----------------------------------------------------------------
Message "Uninstalling " + $ProductId$ + " Both..."
if not (GetRegistryStringValue("[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\" + $ID$ + "] DisplayName") = "")
comment "MSI id " + $ID$ + " found in registry, starting msiexec to uninstall"
Winbatch_uninstall_msi
sub_check_exitcode
endif
[Winbatch_uninstall_msi]
msiexec /x $ID$ /qb! REBOOT=ReallySuppress
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif
setup.ins
[Actions]
SetLogLevel=6
requiredWinstVersion >= "4.10.8.6"
; Include configuration
include_insert "%scriptpath%\vars.opsiinc"
include_insert "%scriptpath%\config.opsiinc"
; ----------------------------------------------------------------
; - PreCheck & Settings
; ----------------------------------------------------------------
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
isFatalError
; Stop process and set installation status to failed
else
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
endif
if ( $checktask$ = "true")
for %s% in $SearchProcess$ do sub_checktask
else
comment "Checktask is off"
endif
; ----------------------------------------------------------------
; - Remove Aktionen
; ----------------------------------------------------------------
comment "Remove MSI from System"
if ($INST_SystemType$ = "x86 System")
for %s% in $MSI_32$ do sub_open_dellsub
else
for %s% in $MSI_64$ do sub_open_dellsub
endif
for %s% in $MSI_Both$ do sub_open_dellsub
; ----------------------------------------------------------------
; - Setup Aktionen
; ----------------------------------------------------------------
if ($INST_SystemType$ = "x86 System")
Message "Installing " + $ProductId$ + " 32 Bit..."
comment "Start setup program"
Winbatch_install_32
Sub_check_exitcode
endif
if ($INST_SystemType$ = "64 Bit System")
Message "Installing " + $ProductId$ + " 64 Bit..."
comment "Start setup program"
Winbatch_install_64
Sub_check_exitcode
endif
include_append "%scriptpath%/additional/additional_sections.opsiinc"
include_insert "%scriptpath%/additional/additional_actions.opsiinc"
; ----------------------------------------------------------------
; - Sektionen
; ----------------------------------------------------------------
[Winbatch_install_32]
$setupcommand32$
[Winbatch_install_64]
$setupcommand64$
[sub_open_dellsub]
set $ID$ = "%s%"
Sub "%ScriptPath%\delsub.ins"
[sub_checktask]
set $currentchecktask$ = "%s%"
set $tasklist$ = getOutStreamFromSection('DosInAnIcon_checkprocess')
set $processVAR$ = unquote(takeString(1,$tasklist$), '"')
if ($processVAR$ = $currentchecktask$)
Message = "Prozess gefunden"
if ($killtask$ = "true")
killtask $currentchecktask$
else
message "killtask is set to false"
endif
if ($fatalerror$ = "true")
pause $userfail$
isFatalError
else
message "fatalError is set to false"
endif
message "Prozess nicht gefunden - do nothing"
endif
[DosInAnIcon_checkprocess]
@echo off
TASKLIST /FI "IMAGENAME eq $subvar$" /fo CSV
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif
uninstall.ins
[Actions]
SetLogLevel=6
requiredWinstVersion >= "4.10.8.6"
include_insert "%scriptpath%\vars.opsiinc"
include_insert "%scriptpath%\config.opsiinc"
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
comment "Remove MSI from System"
if ($INST_SystemType$ = "x86 System")
for %s% in $installed_MSI_32$ do sub_open_dellsub
else
for %s% in $installed_MSI_64$ do sub_open_dellsub
endif
for %s% in $installed_MSI_Both$ do sub_open_dellsub
[sub_open_dellsub]
set $ID$ = "%s%"
Sub "%ScriptPath%\delsub.ins"
vars.ins
; ---------------------------------------------------------------- ; - DefVar / DefString ; ---------------------------------------------------------------- DefVar $MsiId32$ DefVar $MsiId64$ DefVar $LogDir$ DefVar $ProductId$ DefVar $MinimumSpace$ DefVar $InstallDir32$ DefVar $InstallDir64$ DefVar $ExitCode$ DefVar $INST_SystemType$ DefVar $INST_architecture$ DefVar $setupcommand32$ DefVar $setupcommand64$ DefVar $ID$ DefVar $subvar$ DefVar $killtask$ DefVar $checktask$ DefStringList $MSI_32$ DefStringList $MSI_64$ DefStringList $MSI_Both$ DefStringlist $installed_MSI_Both$ DefStringList $installed_MSI_32$ DefStringList $installed_MSI_64$ DefStringList $processlist$ DefStringList $process$ DefStringList $process_unquote$ DefStringList $SearchProcess$ DefStringList $currentchecktask$ DefStringList $processVAR$
userspace/origin.txt · Last modified: by 127.0.0.1