UltraVNC Server

(By — yonis 2013/08/13 13:00) VNC-Server
2013-08-13

Script by MrNiceguy
Comments and improvements are welcome

Tested with opsi 4.0.2

UVNC Setup at http://www.uvnc.com/downloads/ultravnc.html

Tree:

setup.ins
start.ins
uninstall.ins
delsub.ins
killtask.ins (By  --- //[[tobias.friede@wki.fraunhofer.de|tobias]] 2012/10/01 20:07//)
Setup.exe
ultavnc.ini
ultravncInstall.inf
UltraVNC.png

setup.ins

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/
 
[Actions]
requiredWinstVersion >= "4.10.8.6"
 
DefVar $MsiId$
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ProductId$  
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
 
Set $LogDir$ = "%SystemDrive%\tmp"
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts, 
; no white space use '-' as a seperator
Set $ProductId$       = "UltraVNC"
Set $MinimumSpace$    = "5 MB"
; the path were we find the product after the installation
Set $InstallDir$      = "%ProgramFiles32Dir%\uvnc bvba\UltraVNC"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
; ----------------------------------------------------------------
 
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
	LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
	isFatalError
	; Stop process and set installation status to failed
else
	comment "Show product picture"
	ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
	if FileExists($InstallDir$ + "\winvnc.exe")
		comment "Start uninstall sub section"
		Sub "%ScriptPath%\delsub32.ins"
	endif
 
	Message "Installing " + $ProductId$ + " ..."
 
	if $LicenseRequired$ = "true"
		comment "Licensing required, reserve license and get license key"
		Sub_get_licensekey
	endif
 
	comment "Start setup program"
	Winbatch_install
	Sub_check_exitcode
 
	comment "Copy files"
	Files_install /32Bit
 
	comment "Start application"
	Sub "%ScriptPath%\start.ins"
endif
 
[Winbatch_install]
; === Inno Setup ========================================================================================
; http://unattended.sourceforge.net/InnoSetup_Switches_ExitCodes.html
; You may create setup answer file by: setup.exe /SAVEINF="filename"
; You may use an answer file by the parameter /LOADINF="filename"
 "%ScriptPath%\Setup.exe" /verysilent /LOADINF="%ScriptPath%\ultravncInstall.inf" /log /norestart
 
[Files_install]
; Example of recursively copying some files into the installation directory:
;
 copy -s "%ScriptPath%\ultravnc.ini" "$InstallDir$"
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

start.ins

[Actions]
setloglevel = 6
requiredWinstVersion >= "4.11.2.9"
 
DefVar $InstallDir$
 
Set $InstallDir$ = "%ProgramFiles32Dir%\uvnc bvba\UltraVNC\winvnc.exe"
 
 
;if FileExist("%ProgramFiles32Dir%\uvnc bvba\UltraVNC\winvnc.exe")
	comment "Start Application"
	DosBatch_1
;endif
 
 
[DosBatch_1]
	"%ProgramFiles32Dir%\uvnc bvba\UltraVNC\winvnc.exe"

uninstall.ins

; Copyright (c) uib gmbh (www.uib.de)
; This sourcecode is owned by uib gmbh
; and published under the Terms of the General Public License.
; credits: http://www.opsi.org/credits/
 
[Actions]
requiredWinstVersion >= "4.10.8.6"
 
DefVar $MsiId$
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir$
DefVar $LicenseRequired$
DefVar $LicensePool$
 
Set $LogDir$ = "%SystemDrive%\tmp"
 
; ----------------------------------------------------------------
; - Please edit the following values                             -
; ----------------------------------------------------------------
Set $ProductId$       = "opsi-template"
Set $InstallDir$      = "%ProgramFiles32Dir%\uvnc bvba\UltraVNC"
Set $LicenseRequired$ = "false"
Set $LicensePool$     = "p_" + $ProductId$
; ----------------------------------------------------------------
 
 
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists("%ScriptPath%\killtask.ins")
	comment "Sart task kill sub section"
	Sub "%ScriptPath%\killtask.ins"
endif
 
if FileExists("%ScriptPath%\delsub32.ins")
	comment "Start uninstall sub section"
	Sub "%ScriptPath%\delsub32.ins"
endif
 
if $LicenseRequired$ = "true"
	comment "Licensing required, free license used"
	Sub_free_license
endif

delsub.ins

Set $UninstallProgram$ = $InstallDir$ + "\unins000.exe"
 
Message "Uninstalling " + $ProductId$ + " ..."
 
if FileExists($UninstallProgram$)
;	comment "Uninstall program found, starting uninstall"
	Winbatch_uninstall
	sub_check_exitcode
endif
 
;comment "Uninstall"
winbatch_uninstall
 
comment "Delete files"
Files_uninstall /32Bit
 
[Winbatch_uninstall]
 
  Sub "%SciptPath%\killtask.ins"
  "$UninstallProgram$" /silent /norestart /SUPPRESSMSGBOXES
 
[Files_uninstall]
; Example for recursively deleting the installation directory (don't forget the trailing backslash):
;
 delete -sf "$InstallDir$\"
 
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
	comment "Looks good: setup program gives exitcode zero"
else
	comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
	if ($ExitCode$ = "1605")
		comment "ERROR_UNKNOWN_PRODUCT	1605	This action is only valid for products that are currently installed."
		comment "Uninstall of a not installed product failed - no problem"
	else
		if ($ExitCode$ = "1641")
			comment "looks good: setup program gives exitcode 1641"
			comment "ERROR_SUCCESS_REBOOT_INITIATED	1641	The installer has initiated a restart. This message is indicative of a success."
		else
			if ($ExitCode$ = "3010")
				comment "looks good: setup program gives exitcode 3010"
				comment "ERROR_SUCCESS_REBOOT_REQUIRED	3010	A restart is required to complete the install. This message is indicative of a success."
			else
				logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
				isFatalError
			endif
		endif
	endif
endif

killtask.ins

(By — tobias 2012/10/01 20:07)

[Actions]
setloglevel = 6
requiredWinstVersion >= "4.11.2.9"
 
DefVar $process2$
DefVar $subvar$
DefVar $killtask$
 
DefStringList $processlist$
DefStringList $process$
DefStringList $SearchProcess$
 
;----------Definiere hier welche Programme gesucht und geschlossen werden sollen--------------------------------
set $searchProcess$ = createStringList ('winvnc.exe')
;sollen die Programme automatisch geschlossen werden? ACHTUNG: Datenverlust möglich!
set $killtask$ = "true"
;----------------------------------------------------------------------------------------------------------------
 
for %s% in $SearchProcess$ do sub_checkfunktion
 
[sub_checkfunktion]
set $subvar$ = "%s%"
set $processlist$ = getOutStreamFromSection('DosInAnIcon_checkprocess')
set $process$ = splitString(takeString(1,$processlist$), ",")
set $process2$ = unquote(takeString(1,$processlist$), '"')
 
DosBatch_1
 
if ($process2$ = $subvar$)
Message = "Prozess gefunden"
	if ($killtask$ = "true")
		killtask $subvar$	
	else
		message "killtask is set false"
	endif
else
message = "Prozess nicht gefunden"
endif
 
 
 
[DosInAnIcon_checkprocess]
@echo off
TASKLIST /FI "IMAGENAME eq $subvar$" /fo CSV
 
[DosBatch_1]
	net stop uvnc_service
	sc delete uvnc_service

ultravnc.ini

[ultravnc] 		
passwd=2160ACF6951DC37C14
passwd2=6391200523C3E93A22
[admin] 		
FileTransferEnabled=1
FTUserImpersonation=1
BlankMonitorEnabled=1 		
BlankInputsOnly=0 		
CaptureAlphaBlending=1 		
BlackAlphaBlending=0 		
DefaultScale=1
UseDSMPlugin=0
DSMPlugin=Pfad zum DSM Plugin
DSMPluginConfig=Konfiguration DSM Plugin
primary=1 		
secondary=0 		
SocketConnect=1 		
HTTPConnect=1
XDMCPConnect=0 		
AutoPortSelect=1
InputsEnabled=1 		
LocalInputsDisabled=0
IdleTimeout=0
EnableJapInput=0 		
QuerySetting=2 		
QueryTimeout=10 		
QueryAccept=0 		
LockSetting=0 		
RemoveWallpaper=1
RemoveEffects=0
RemoveFontSmoothing=0 		
RemoveAero=1
DebugMode=2
Avilog=0 		
path=C:\Programme\uvnc bvba\UltraVnc\log                             		Pfad zu Ultra VNC
DebugLevel=10 		
AllowLoopback=0 		
LoopbackOnly=0 		
AllowShutdown=0 		
AllowProperties=1 		
AllowEditClients=1 		
FileTransferTimeout=30
KeepAliveInterval=5 		
SocketKeepAliveTimeout=10000 		
DisableTrayIcon=0 		
MSLogonRequired=0
NewMSLogon=0 		
ConnectPriority=0 		
UseRegistry=0 		
AuthRequired=1 		
AuthHosts= 		
PortNumber=5900 		
HTTPPortNumber=5800 		Port Nummer für Verbindung über Java
QueryIfNoLogon=1 		
kickrdp=0 		
clearconsole=0 		
[admin_auth] 		Administratorgruppen für Authentifizierung
group1=DOMAIN\Administratoren
group2=
group3= 		
locdom1=0
locdom2=0
locdom3=0 		
[poll] 		
TurboMode=1 		
PollUnderCursor=0 		
PollForeground=0 		
PollFullScreen=1 		
OnlyPollConsole=0 		
OnlyPollOnEvent=0 		
MaxCpu=40 		
EnableDriver=0 		
EnableHook=1 		
EnableVirtual=0 		
SingleWindow=0 		
SingleWindowName=
[Permissions]

ultravncinstall.inf

[Setup]
Lang=de
Dir=C:\Program Files\uvnc bvba\UltraVNC
Group=UltraVNC
NoIcons=0
SetupType=server_silent
Components=ultravnc_server
Tasks=installservice,startservice

OPSI DokuWiki

Table of Contents

UltraVNC Server

setup.ins

start.ins

uninstall.ins

delsub.ins

killtask.ins

ultravnc.ini

ultravncinstall.inf

OPSI DokuWiki

User Tools

Site Tools

Table of Contents

UltraVNC Server

setup.ins

start.ins

uninstall.ins

delsub.ins

killtask.ins

ultravnc.ini

ultravncinstall.inf

Page Tools