userspace:vlc_mediaplayer
Table of Contents
VLC Mediaplayer
Tested with opsi 4.0.1
requiredWinstVersion >= “4.10.8.6”
For 32 Bit
Download only from http://www.videolan.org/
(see diskcussion page)
By Thomas_H 2011/10/28 14:28
Tree:
delsub.ins setup.ins uninstall.ins vlc-version-win32.exe vlc.png
setup.ins
[Initial]
LogLevel=9
; Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; let started programs run in front of the winst window
StayOnTop=false
[Actions]
requiredWinstVersion >= "4.10.8.6"
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ProductId$
DefVar $MinimumSpace$
DefVar $InstallDir$
DefVar $ExitCode$
DefVar $LicenseRequired$
DefVar $LicenseKey$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $Version$
DefVar $Inst_Cmd$
DefVar $Inst_Prg$
DefVar $Uninst_Prg$
DefVar $Uninst_Cmd$
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
;$ProductId$ should be the name of the product in opsi
; therefore please: only lower letters, no umlauts,
; no white space use '-' as a seperator
Set $ProductId$ = "vlc"
;Kein Punkt in der Versionsnummer! 4.30 ist 430, 4.40 ist 440 oder 4.51 ist 451!
Set $Version$ = "1.1.11"
Set $MinimumSpace$ = "25 MB"
; the path were we find the product after the installation
Set $InstallDir$ = "%ProgramFiles32Dir%\VideoLAN"
Set $LicenseRequired$ = "false"
Set $LicensePool$ = "p_" + $ProductId$
Set $Inst_Prg$ = "vlc-"+$Version$+"-win32.exe"
Set $Inst_Cmd$ = ' /L=1031 /S'
Set $Uninst_Prg$ = "\vlc\uninstall.exe"
Set $Uninst_Cmd$ = ' /S'
; ----------------------------------------------------------------
if not(HasMinimumSpace ("%SystemDrive%", $MinimumSpace$))
LogError "Not enough space on %SystemDrive%, " + $MinimumSpace$ + " on drive %SystemDrive% needed for " + $ProductId$
isFatalError
; Stop process and set installation status to failed
else
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
if FileExists("%ScriptPath%\delsub.ins")
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub.ins"
endif
if $LicenseRequired$ = "true"
comment "Licensing required, reserve license and get license key"
Sub_get_licensekey
endif
comment "installing"
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Installing " + $ProductId$
comment "Start setup program"
Winbatch_install
Sub_check_exitcode
endif
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Installing " + $ProductId$
comment "Start setup program"
Winbatch_install
Sub_check_exitcode
endif
endif
[Winbatch_install]
; Choose one of the following examples as basis for your installation
; You can use $LicenseKey$ var to pass a license key to the installer
;
; === Nullsoft Scriptable Install System ================================================================
"%ScriptPath%\$Inst_Prg$"+$Inst_Cmd$
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif
uninstall.ins
[Initial]
LogLevel=9
; Log Errors in Logfile but don't abort:
ExitOnError=false
; Show syntax errors in the script:
ScriptErrorMessages=on
; Dont trace step by step through the script:
TraceMode=off
; let started programs run in front of the winst window
StayOnTop=false
[Actions]
requiredWinstVersion >= "4.10.8.6"
DefVar $UninstallProgram$
DefVar $LogDir$
DefVar $ExitCode$
DefVar $ProductId$
DefVar $InstallDir$
DefVar $LicenseRequired$
DefVar $LicensePool$
DefVar $INST_SystemType$
DefVar $INST_architecture$
DefVar $Uninst_Cmd$
DefVar $Uninst_Prg$
Set $INST_SystemType$ = GetSystemType
set $INST_architecture$ = GetProductProperty("install_architecture","system specific")
Set $LogDir$ = "%SystemDrive%\tmp"
; ----------------------------------------------------------------
; - Please edit the following values -
; ----------------------------------------------------------------
Set $ProductId$ = "vlc"
Set $InstallDir$ = "%ProgramFiles32Dir%\VideoLAN\vlc\"
Set $LicenseRequired$ = "false"
Set $LicensePool$ = "p_" + $ProductId$
Set $Uninst_Prg$ = "uninstall.exe"
Set $Uninst_Cmd$ = ' /S'
; ----------------------------------------------------------------
comment "Show product picture"
ShowBitmap "%ScriptPath%\" + $ProductId$ + ".png" $ProductId$
Message "Uninstalling " + $ProductId$ + " ..."
if FileExists("%ScriptPath%\delsub.ins")
comment "Start uninstall sub section"
Sub "%ScriptPath%\delsub.ins"
endif
if $LicenseRequired$ = "true"
comment "Licensing required, free license used"
Sub_free_license
endif
[Sub_free_license]
comment "License management is enabled and will be used"
comment "Trying to free license used for the product"
DefVar $result$
Set $result$ = FreeLicense($LicensePool$)
; If there is an assignment of a license pool to the product, it is possible to use
; Set $result$ = FreeLicense("", $ProductId$)
;
; If there is an assignment of a license pool to a windows software id, it is possible to use
; DefVar $WindowsSoftwareId$
; $WindowsSoftwareId$ = "..."
; set $result$ = FreeLicense("", "", $WindowsSoftwareId$)
delsub.ins
Set $UninstallProgram$ = $InstallDir$ + $Uninst_Prg$
if (($INST_SystemType$ = "x86 System") and ($INST_architecture$ = "system specific")) or ($INST_architecture$ = "both") or ($INST_architecture$ = "32 only")
Message "Uninstalling " + $ProductId$
if FileExists($UninstallProgram$)
comment "Uninstall program found, starting uninstall"
Winbatch_uninstall
comment "Removing "+$InstallDir$
Files_uninstall
sub_check_exitcode
endif
endif
if ($INST_SystemType$ = "64 Bit System") and (($INST_architecture$ = "system specific") or ($INST_architecture$ = "both") or ($INST_architecture$ = "64 only"))
Message "Uninstalling " + $ProductId$
if FileExists($UninstallProgram$)
comment "Uninstall program found, starting uninstall"
Winbatch_uninstall
comment "Removing "+$InstallDir$
Files_uninstall
sub_check_exitcode
endif
endif
[Winbatch_uninstall]
"$UninstallProgram$"+$Uninst_Cmd$
[Files_uninstall]
; Example for recursively deleting the installation directory (don't forget the trailing backslash):
;
delete -sf "$InstallDir$\"
[Sub_check_exitcode]
comment "Test for installation success via exit code"
set $ExitCode$ = getLastExitCode
; informations to exit codes see
; http://msdn.microsoft.com/en-us/library/aa372835(VS.85).aspx
; http://msdn.microsoft.com/en-us/library/aa368542.aspx
if ($ExitCode$ = "0")
comment "Looks good: setup program gives exitcode zero"
else
comment "Setup program gives a exitcode unequal zero: " + $ExitCode$
if ($ExitCode$ = "1605")
comment "ERROR_UNKNOWN_PRODUCT 1605 This action is only valid for products that are currently installed."
comment "Uninstall of a not installed product failed - no problem"
else
if ($ExitCode$ = "1641")
comment "looks good: setup program gives exitcode 1641"
comment "ERROR_SUCCESS_REBOOT_INITIATED 1641 The installer has initiated a restart. This message is indicative of a success."
else
if ($ExitCode$ = "3010")
comment "looks good: setup program gives exitcode 3010"
comment "ERROR_SUCCESS_REBOOT_REQUIRED 3010 A restart is required to complete the install. This message is indicative of a success."
else
logError "Fatal: Setup program gives an unknown exitcode unequal zero: " + $ExitCode$
isFatalError
endif
endif
endif
endif
userspace/vlc_mediaplayer.txt · Last modified: 2021/08/23 08:37 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
